Kontakt 6 Creator Tools Export to Decent Sampler format

DS Export.lua

-- Check for valid instrument
if not instrument then
    print("The following error message informs you that the Creator Tools are not "..
          "focused on a Kontakt instrument. To solve this, load an instrument in "..
          "Kontakt and select it from the instrument dropdown menu on top.")
    return
end

print('<?xml version="1.0" encoding="UTF-8"?>')
print("<!-- DS file for Kontakt 6 instrument " .. instrument.name .. " -->")
print('<DecentSampler pluginVersion="1">')
print('  <groups>')

local count = 0

for i,g in pairs(instrument.groups) do
  local vol = g.volume
  if vol < -144 then
    vol = -144
  end
  print("    <group name=\"" .. g.name .. "\" volume=\"" .. vol .. "dB\" tuning=\"" .. g.tune .. "\" ampVelTrack=\"1\">")

  for n,z in pairs(g.zones) do

        local regionText = "      <sample path=\"Samples/" .. filesystem.filename(z.file) .. 
            "\" volume=\"" .. z.volume .. 
            "dB\" tuning=\"" .. string.format("%.2f",z.tune) ..
            "\" rootNote=\"" .. z.rootKey ..
            "\" start=\"" .. z.sampleStart ..
            "\" end=\"" .. z.sampleEnd ..
            "\" loNote=\"" .. z.keyRange.low ..
            "\" hiNote=\"" .. z.keyRange.high ..
            "\" loVel=\"" .. z.velocityRange.low ..
            "\" hiVel=\"" .. z.velocityRange.high .. "\""

	    if z.loops[0].mode == 0 then
            
	    else
            regionText = regionText .. " loopEnabled=\"true\""
	        local loopEnd = z.loops[0].start + z.loops[0].length - 1
		    regionText = regionText .. " loopStart=\"" .. z.loops[0].start .. "\" loopEnd=\"" .. loopEnd .. "\" loopCrossfade=\"" .. z.loops[0].xfade .. "\""
	    end	

      regionText = regionText .. " />"

	     print(regionText)
         
            count = count + 1

        end
  print("    </group>")
end
  print("  </groups>")
  print("</DecentSampler>")

@praisetracks Sure, this should work. But you might have to adjust the paths in the created file afterwards, you should be able to do this with Search&Replace in any editor.