origin2001-boot-up

originboot1

IP27 PROM SGI Version 6.156  built 11:27:56 AM Nov 18, 2003
Testing/Initializing memory ...............             DONE
Copying PROM code to memory ...............             DONE
Discovering local IO ......................             DONE
Discovering NUMAlink connectivity .........             DONE
Found 5 objects (3 hubs, 2 routers) in 55783 usec
Waiting for peers to complete discovery....             DONE
Recognized 390 MHz midplane
Global master is /hw/module/1/slot/n1
Testing/Initializing all memory ...........             DONE
Initializing headless node at nasid 1
.......Checking partitioning information .........              DONE
*** Barrier sync warning: local=5355, NIC 0x22cbba=5108 (promrev mismatch?)
*** /hw/module/1/slot/n4 has taken an exception! Continuing...
Loading BASEIO prom .......................             DONE

BASEIO PROM Monitor SGI Version 6.156  built 11:26:28 AM Nov 18, 2003 (BE64)
4 CPUs on 2 nodes found.
Installing PROM Device drivers ............             
Base I/O Ethernet set to /dev/ethernet/ef0

Walking SCSI Adapter 0 (/hw/module/1/slot/io1), (pci id 0)
1+ 2- 3- 4- 5- 6+ 7- 8- 9- 10- 11- 12- 13- 14- 15- = 2 device(s)


Walking SCSI Adapter 1 (/hw/module/1/slot/io1), (pci id 1)
1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- = 0 device(s)

Initializing PROM Device drivers ..........             DONE
Checking hardware inventory ...............              
***Warning: Board in module 1, slot n2 is missing or disabled
It previously contained a node-board, barcode KRN149 laser 4d1d6a
***Warning: Found a new IP27 board in module 1, slot n4, serial GFJ894
Please use the 'update' command from the PROM Monitor to update the inventory
DONE

**** System Configuration and Diagnostics Summary ****
CONFIG:
         No. of NODEs enabled    = 2
         No. of NODEs disabled   = 0
         No. of CPUs enabled     = 4
         No. of CPUs disabled    = 0
         Mem enabled             = 4352 MB
         Mem disabled            = 1024 MB
         No. of RTRs enabled     = 2
         No. of RTRs disabled    = 0

DIAG RESULTS:
         ALL DIAGS PASSED.
**** End System Configuration and Diagnostics Summary ****