wpa_supplicant error codes

wpa_supplicant error codes

reason=1 "Unspecified reason"
reason=2 "Previous authentication no longer valid"
reason=3 "Deauthenticated because sending STA is leaving (or has left) IBSS or ESS"
reason=4 "Disassociated due to inactivity"
reason=5 "Disassociated because AP is unable to handle all currently associated STAs"
reason=6 "Class 2 frame received from nonauthenticated STA"
reason=7 "Class 3 frame received from nonassociated STA"
reason=8 "Disassociated because sending STA is leaving (or has left) BSS"
reason=9 "STA requesting (re)association is not authenticated with responding STA"
reason=10 "Disassociated because the information in the Power Capability element is unacceptable"
reason=11 "Disassociated because the information in the Supported Channels element is unacceptable"
reason=12 "Reserved"
reason=13 "Invalid information element, i.e., an information element defined in this standard for which the content does not meet the specifications in Clause 7"
reason=14 "Message integrity code (MIC) failure"
reason=15 "4-Way Handshake timeout"
reason=16 "Group Key Handshake timeout"
reason=17 "Information element in 4-Way Handshake different from (Re)Association Request/Probe Response/Beacon frame"
reason=18 "Invalid group cipher"
reason=19 "Invalid pairwise cipher"
reason=20 "Invalid AKMP"
reason=21 "Unsupported RSN information element version"
reason=22 "Invalid RSN information element capabilities"
reason=23 "IEEE 802.1X authentication failed"
reason=24 "Cipher suite rejected because of the security policy"
reason=25 "TDLS direct-link teardown due to TDLS peer STA unreachable via the TDLS direct link"
reason=26 "TDLS direct-link teardown for unspecified reason"
reason=27 "Disassociated because session terminated by SSP request"
reason=28 "Disassociated because of lack of SSP roaming agreement"
reason=29 "Requested service rejected because of SSP cipher suite or AKM requirement "
reason=30 "Requested service not authorized in this location"
reason=31 "TS deleted because QoS AP lacks sufficient bandwidth for this QoS STA due to a change in BSS service characteristics or operational mode"
reason=32 "Disassociated for unspecified, QoS-related reason"
reason=33 "Disassociated because QoS AP lacks sufficient bandwidth for this QoS STA"
reason=34 "Disassociated because excessive number of frames need to be acknowledged, but are not acknowledged due to AP transmissions and/or poor channel conditions"
reason=35 "Disassociated because STA is transmitting outside the limits of its TXOPs"
reason=36 "Requested from peer STA as the STA is leaving the BSS (or resetting)"
reason=37 "Requested from peer STA as it does not want to use the mechanism"
reason=38 "Requested from peer STA as the STA received frames using the mechanism for which a setup is required"
reason=39 "Requested from peer STA due to timeout"
reason=45 "Peer STA does not support the requested cipher suite"
reason=46 "Disassociated because authorized access limit reached"
reason=47 "Disassociated due to external service requirements"
reason=48 "Invalid FT Action frame count"
reason=49 "Invalid pairwise master key identifier (PMKI)"
reason=50 "Invalid MDE"
reason=51 "Invalid FTE"
reason=52 "SME cancels the mesh peering instance with the reason other than reaching the maximum number of peer mesh STAs"
reason=53 "The mesh STA has reached the supported maximum number of peer mesh STAs"
reason=54 "The received information violates the Mesh Configuration policy configured in the mesh STA profile"
reason=55 "The mesh STA has received a Mesh Peering Close message requesting to close the mesh peering"
reason=56 "The mesh STA has re-sent dot11MeshMaxRetries Mesh Peering Open messages, without receiving a Mesh Peering Confirm message"
reason=57 "The confirmTimer for the mesh peering instance times out"
reason=58 "The mesh STA fails to unwrap the GTK or the values in the wrapped contents do not match"
reason=59 "The mesh STA receives inconsistent information about the mesh parameters between Mesh Peering Management frames"
reason=60 "The mesh STA fails the authenticated mesh peering exchange because due to failure in selecting either the pairwise ciphersuite or group ciphersuite"
reason=61 "The mesh STA does not have proxy information for this external destination"
reason=62 "The mesh STA does not have forwarding information for this destination"
reason=63 "The mesh STA determines that the link to the next hop of an active path in its forwarding information is no longer usable"
reason=64 "The Deauthentication frame was sent because the MAC address of the STA already exists in the mesh BSS. See 11.3.3 (Additional mechanisms for an AP collocated with a mesh STA)"
reason=65 "The mesh STA performs channel switch to meet regulatory requirements"
reason=66 "The mesh STA performs channel switch with unspecified reason"