Modbus Register für Sungrow Wechselrichter zum Import in Iobroker

sungrow_modbus_register.tsv

Does anybody know if there are also registers for the DTSU666 power meter? I'm specifically looking to get some values directly from there, like current of the phases at the grid handover point, which are not included in what I can get from the inverter. As far as I understand, the power meter has modbus ID 254 (in my case), but I don't know if it possible to query the device through the modbus implementation on the inverter.

13004 seems to need a factor of 0.1 as per my testing with my SH6.0RT.

I have done installation of Sungrow in the last days with post of Atlantis, but I had to add column deviceId behind _adress with value 1

You need to do this if you have checked Multiple device IDs in the Modbus Adapter.

Which is advisable to do, since now we can also read some interesting battery metrics from the battery itself - assuming you have updated your battery firmware to 21.

If you did that it shows up as a separate entity, which makes it adressable in modbus at device ID 200 (the device ID may differ and can be checked on the WinetS under Device Monitoring).

These Registers are taken from this github for home assistant.
Here are the registers formatted for the ioBroker modbus adapter (Multiple device IDs needs to be checked).

On my Sungrow SH5.0RT, the factor of 13004 is 0.1.

Interesting finding (for me): I cannot set the max discharge power to 0. I can set the value to 0 - but it will be ignored. To disable discharging, I have to set the value to 10 - which sets it to 10 - but essentially disables discharging.

Took me a while to wrap my head around it and understand, why it perfectly scales up the discharge power, but does not set it to 0.

Thanks for the feedback so far, changed the factors for 13002 and 13004 - and also changed to signed int for 13007.

I was missing a few more values to use them in the openWB wallbox. Did a lot of adress dump + search, since also the latest Sunggrow modbus specs are incomplete. Have a look at https://github.com/openWB/core/blob/master/packages/modules/devices/sungrow/sungrow/modbus.md.

Most interesting maybe (for SH inverter connected via LAN):

• Register 5030 for AC load power at inverter (useful for effective delivered power)
• Register 13009 for total AC load power at smart meter, negative values if power consumed from net, positive if exported
• Register 5602, 5604, 5606 (int32sw) for load power per phase at smart meter
• Register 5740, 5741, 5742 for voltages per phase at smart meter. Attention: 5018/19/20 contain the voltages delivered at inverter!

I was missing a few more values to use them in the openWB wallbox. Did a lot of adress dump + search, since also the latest Sunggrow modbus specs are incomplete. Have a look at https://github.com/Mantelinho/core/blob/patch_sungrow_modbus/packages/modules/devices/sungrow/modbus.md.

Most interesting maybe (for SH inverter connected via LAN):

• Register 5030 for AC load power at inverter (useful for effective delivered power)
• Register 13009 for total AC load power at smart meter, negative values if power consumed from net, positive if exported
• Register 5602, 5604, 5606 (int32sw) for load power per phase at smart meter
• Register 5740, 5741, 5742 for voltages per phase at smart meter. Attention: 5018/19/20 contain the voltages delivered at inverter!

Quick question: Is 5030 actually different from 13007?

The other ones I already listed here, in case you still need some more.

I was missing a few more values to use them in the openWB wallbox. Did a lot of adress dump + search, since also the latest Sunggrow modbus specs are incomplete. Have a look at https://github.com/openWB/core/blob/master/packages/modules/devices/sungrow/sungrow/modbus.md.
Most interesting maybe (for SH inverter connected via LAN):

• Register 5030 for AC load power at inverter (useful for effective delivered power)
• Register 13009 for total AC load power at smart meter, negative values if power consumed from net, positive if exported
• Register 5602, 5604, 5606 (int32sw) for load power per phase at smart meter
• Register 5740, 5741, 5742 for voltages per phase at smart meter. Attention: 5018/19/20 contain the voltages delivered at inverter!

Quick question: Is 5030 actually different from 13007?

The other ones I already listed here, in case you still need some more.

(edit: Sorry, I mixed this up with 13033)

13007 is the load in the local net (sum of AC consumption), in other words the sum of 13007 and 13009 equals 5030. But: if you have more than one producer (another inverter), 13007 may be negative since the SH does not consider other inverters in retrofit modus for register 13007.

So if you are looking for a 5030 alternative (e.g. if your SH is connected via WiNet), take 13033. They have the same value:
13033: SH via LAN and WiNet-S dongle
5030: SH via LAN and SG via WiNet-S dongle
Both hold the AC active power delivered by the inverter, the value you see as "Wirkleistung gesamt" in iSolarCloud Live-Data.

I think, the naming of 13023 is wrong.

It's giving the State of Charge, not the State of Health

So instead of

13023 Battery state of health Gesundheit der Batterie % uint16be 1 0.1 0
it should be

13023 Battery state of charge Batterieladezustand % uint16be 1 0.1 0

What is then the difference to 13022 which is called "Battery level | Batteriekapazität". According to my experience 13023 really describe the health status of the battery in %. My system started with a value of 100% and is now after 1,5 year at 98%.

I think, the naming of 13023 is wrong.
It's giving the State of Charge, not the State of Health
So instead of
13023 Battery state of health Gesundheit der Batterie % uint16be 1 0.1 0
it should be
13023 Battery state of charge Batterieladezustand % uint16be 1 0.1 0

What is then the difference to 13022 which is called "Battery level | Batteriekapazität". According to my experience 13023 really describe the health status of the battery in %. My system started with a value of 100% and is now after 1,5 year at 98%.

This is correct, it’s the same for me.

I think, the naming of 13023 is wrong.

I'm sorry, you're right: I misunderstood the output of qModMaster, which hover-displayed address 13022 for register 13023 (as long as I remember, because currently it doesn't read the values at all)

I will delete the comment above, because it was simply wrong!

I have added a small 800W inverter to my Sungrow SH10RT by plugging it into a non-backup outlet in the house (without doing any settings changes to the SH10RT). When the small inverters power exceeds the house load, the house load indicated in the iSolarCloud app turns negative as it should. However, the 13007 register for total AC load power does not produce negative values but stays at zero instead. Any ideas? The format upon reading should be OK as the same one produces pos and neg values for the 13009 register.

Please Add
Beim SH via LAN:
Register 5030 enthält die AC Wirkleistung pro WR (SH-LAN und SG-WiNet), alternativ
Register 13033 enthält die AC Wirkleistung pro WR (SH-LAN und SH-WiNet)
Register 13009 enthält die Gesamtwirkleistung am Smartmeter
Register 5602, 5604, 5606 enthalten die Wirkleistungen pro Phase am Smartmeter
Register 5740, 5741, 5742 enthalten die Spannungen pro Phase am Smartmeter

Confirmed here
https://forum.openwb.de/viewtopic.php?t=7804&start=10

Basically those are the values from comment https://gist.github.com/dnoegel/543c72ef722365a3934bbad0bb43e222?permalink_comment_id=5018788#gistcomment-5018788, please see linked document