Created
October 15, 2021 12:00
-
-
Save dongsupark/8a0b97ab073981a062d5f7745fe323f4 to your computer and use it in GitHub Desktop.
flatcar-sdk-container-20211015 build log
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ###### | |
| ###### | |
| ###### Building SDK container for version 3005.0.0 from '/home/dpark/flatcar-sdk.amd64/.cache/sdks/flatcar-sdk-amd64-3005.0.0.tar.bz2' ###### | |
| ###### Writing versionfile 'sdk_container/.repo/manifests/version.txt' to SDK '3005.0.0', OS '3005.0.0'. ###### | |
| ###### Using existing SDK tarball container 'flatcar-sdk-tarball:3005.0.0' ###### | |
| ###### Initialising the SDK container and building board packages ###### | |
| Sending build context to Docker daemon 138.1MB | |
| Step 1/34 : ARG VERSION | |
| Step 2/34 : FROM flatcar-sdk-tarball:${VERSION} | |
| ---> 4e9a0a229dd4 | |
| Step 3/34 : ARG OFFICIAL=0 | |
| ---> Using cache | |
| ---> 6084b6bd586f | |
| Step 4/34 : RUN touch /etc/debian_chroot | |
| ---> Using cache | |
| ---> 09b44729c27d | |
| Step 5/34 : RUN chmod 644 /etc/passwd | |
| ---> Using cache | |
| ---> d3952a4691e8 | |
| Step 6/34 : RUN chmod 644 /etc/group | |
| ---> Using cache | |
| ---> 8f8645a158c5 | |
| Step 7/34 : RUN if ! grep -q portage /etc/group ; then echo "portage::250:portage" >>/etc/group; fi | |
| ---> Using cache | |
| ---> 0f958417ecc5 | |
| Step 8/34 : RUN if ! grep -q portage /etc/passwd; then echo "portage:x:250:250:portage:/var/tmp/portage:/bin/false" >>/etc/passwd; fi | |
| ---> Using cache | |
| ---> 31feb49e51e7 | |
| Step 9/34 : RUN echo 'export FEATURES="-ipc-sandbox -network-sandbox -pid-sandbox"' >> /etc/skel/.bashrc | |
| ---> Using cache | |
| ---> 2761008296c1 | |
| Step 10/34 : RUN groupadd sdk | |
| ---> Using cache | |
| ---> bc4d57a8ea48 | |
| Step 11/34 : RUN useradd -g sdk -G portage sdk | |
| ---> Using cache | |
| ---> 662460f79601 | |
| Step 12/34 : RUN echo "sdk ALL=(ALL) NOPASSWD: ALL" > /etc/sudoers.d/sdk-user | |
| ---> Using cache | |
| ---> 6474f5e6306c | |
| Step 13/34 : RUN rm -rf /mnt/host/source | |
| ---> Using cache | |
| ---> fb25119c5ff4 | |
| Step 14/34 : COPY --chown=sdk:sdk sdk_container/ /mnt/host/source | |
| ---> Using cache | |
| ---> 1d45d5befaf1 | |
| Step 15/34 : COPY --chown=sdk:sdk . /mnt/host/source/src/scripts | |
| ---> 2d627ec0859f | |
| Step 16/34 : RUN chown sdk:sdk /mnt/host/source | |
| ---> Running in bb1004c1156c | |
| Removing intermediate container bb1004c1156c | |
| ---> 3eb5294849a8 | |
| Step 17/34 : COPY sdk_lib/90_env_keep /etc/sudoers.d/90_env_keep | |
| ---> 9aab30e605d6 | |
| Step 18/34 : RUN chmod 0440 /etc/sudoers.d/90_env_keep | |
| ---> Running in a2fba3d7d9bb | |
| Removing intermediate container a2fba3d7d9bb | |
| ---> 1db4da16b5d5 | |
| Step 19/34 : USER sdk:sdk | |
| ---> Running in e90566a25daf | |
| Removing intermediate container e90566a25daf | |
| ---> c6726e395594 | |
| Step 20/34 : RUN mkdir -p /mnt/host/source/src/scripts /mnt/host/source/src/build | |
| ---> Running in 48b35ad2f7a6 | |
| Removing intermediate container 48b35ad2f7a6 | |
| ---> dc7849a8b068 | |
| Step 21/34 : RUN ln -s /mnt/host/source /home/sdk/trunk | |
| ---> Running in e652a8c3d621 | |
| Removing intermediate container e652a8c3d621 | |
| ---> 90866ce6296b | |
| Step 22/34 : RUN rm /home/sdk/.bashrc | |
| ---> Running in 691fcde5b547 | |
| Removing intermediate container 691fcde5b547 | |
| ---> 59a5899761b9 | |
| Step 23/34 : RUN cp /etc/skel/.bashrc /home/sdk | |
| ---> Running in df1586cde7e2 | |
| Removing intermediate container df1586cde7e2 | |
| ---> bb867a66ad78 | |
| Step 24/34 : RUN echo "cd /home/sdk/trunk/src/scripts" >> /home/sdk/.bashrc | |
| ---> Running in 1ad53b19018a | |
| Removing intermediate container 1ad53b19018a | |
| ---> 7560aa3b3578 | |
| Step 25/34 : RUN echo 'export PATH="$PATH:/usr/local/bin:/usr/local/sbin"' >> /home/sdk/.bashrc | |
| ---> Running in 9f5e89f01a89 | |
| Removing intermediate container 9f5e89f01a89 | |
| ---> 43e2d8a6cd9e | |
| Step 26/34 : RUN echo "if [ -f /mnt/host/source/.env ]; then source /mnt/host/source/.env; fi" >> /home/sdk/.bashrc | |
| ---> Running in 3d48569f9602 | |
| Removing intermediate container 3d48569f9602 | |
| ---> e305227345a5 | |
| Step 27/34 : RUN echo "if [ -f /mnt/host/source/.sdkenv ]; then source /mnt/host/source/.sdkenv; fi" >> /home/sdk/.bashrc | |
| ---> Running in 44c8c4d62333 | |
| Removing intermediate container 44c8c4d62333 | |
| ---> d8e172110417 | |
| Step 28/34 : COPY --chown=sdk:sdk sdk_lib/sdk_entry.sh /home/sdk | |
| ---> aa1e383c4e06 | |
| Step 29/34 : RUN chmod 755 /home/sdk/sdk_entry.sh | |
| ---> Running in 30887a695f35 | |
| Removing intermediate container 30887a695f35 | |
| ---> edba8184596b | |
| Step 30/34 : RUN echo "export COREOS_OFFICIAL=$OFFICIAL" > /mnt/host/source/.env | |
| ---> Running in 49bf1ab5963c | |
| Removing intermediate container 49bf1ab5963c | |
| ---> fd6fe1b6c8a5 | |
| Step 31/34 : RUN /home/sdk/sdk_entry.sh ./update_chroot --toolchain_boards="amd64-usr arm64-usr" | |
| ---> Running in 7b5289dc3ce9 | |
| [91mbash: cannot set terminal process group (1): Inappropriate ioctl for device | |
| bash: no job control in this shell | |
| [0m[91mINFO update_chroot: Setting up portage... | |
| [0m[91mfind: '/mnt/host/source/config/portage/repos': No such file or directory | |
| [0m[91mINFO update_chroot: Setting up crossdev... | |
| [0m[91mINFO update_chroot: Updating chroot: | |
| [0m[91mINFO update_chroot: chroot version: 3005.0.0 | |
| [0m[91mINFO update_chroot: Flatcar version: 3005.0.0+2021-10-15-1135 | |
| [0m[91mINFO update_chroot: Updating basic system packages | |
| [0m | |
| Performing Global Updates | |
| (Could take a couple of minutes if you have a lot of binary packages.) | |
| >>> Recording sys-apps/portage in "world" favorites file... | |
| >>> Recording sys-devel/binutils in "world" favorites file... | |
| >>> Recording sys-devel/crossdev in "world" favorites file... | |
| >>> Recording sys-devel/gcc in "world" favorites file... | |
| >>> Recording sys-devel/sysroot-wrappers in "world" favorites file... | |
| >>> Recording sys-kernel/linux-headers in "world" favorites file... | |
| >>> Recording sys-libs/glibc in "world" favorites file... | |
| >>> Jobs: 0 of 0 complete Load avg: 3.61, 1.80, 1.04 | |
| * Switching native-compiler to x86_64-pc-linux-gnu-9.3.0 ... | |
| * Updating LTO plugin symlink in /usr/x86_64-pc-linux-gnu/binutils-bin/lib/bfd-plugins | |
| [ ok ] | |
| [91mINFO update_chroot: Updating cross aarch64-cros-linux-gnu toolchain | |
| [0mLPKG=glibc | |
| LVER=[stable] | |
| - | |
| * crossdev version: 20200801 | |
| * Host Portage ARCH: amd64 | |
| * Host Portage System: x86_64-pc-linux-gnu (x86_64-pc-linux-gnu) | |
| * Target Portage ARCH: arm64 | |
| * Target System: aarch64-cros-linux-gnu | |
| * Stage: 4 (C/C++ compiler) | |
| * USE=multilib: no | |
| * Target ABIs: arm64 | |
| * binutils: binutils-[stable] | |
| * gcc: gcc-[stable] | |
| * headers: linux-headers-[stable] | |
| * libc: glibc-[stable] | |
| * Extra: gdb: DO IT | |
| * CROSSDEV_OVERLAY: /usr/local/portage/crossdev | |
| * PORT_LOGDIR: /var/log/portage | |
| * PORTAGE_CONFIGROOT: / | |
| * Portage flags: --quiet -uNv --with-bdeps=y --select --usepkg --getbinpkg --jobs=4 | |
| * getting sys-libs/glibc from /mnt/host/source/src/third_party/coreos-overlay | |
| * getting sys-devel/gdb from /mnt/host/source/src/third_party/coreos-overlay | |
| * leaving metadata/layout.conf alone in /usr/local/portage/crossdev | |
| Installing existing binaries | |
| >>> Jobs: 0 of 0 complete Load avg: 3.24, 1.81, 1.05 | |
| * Switching cross-compiler to aarch64-cros-linux-gnu-9.3.0 ... | |
| * Updating LTO plugin symlink in /usr/x86_64-pc-linux-gnu/aarch64-cros-linux-gnu/binutils-bin/lib/bfd-plugins | |
| [ ok ] | |
| [91mINFO update_chroot: Updating cross x86_64-cros-linux-gnu toolchain | |
| [0mLPKG=glibc | |
| LVER=[stable] | |
| - | |
| * crossdev version: 20200801 | |
| * Host Portage ARCH: amd64 | |
| * Host Portage System: x86_64-pc-linux-gnu (x86_64-pc-linux-gnu) | |
| * Target Portage ARCH: amd64 | |
| * Target System: x86_64-cros-linux-gnu | |
| * Stage: 4 (C/C++ compiler) | |
| * USE=multilib: no | |
| * Target ABIs: amd64 | |
| * binutils: binutils-[stable] | |
| * gcc: gcc-[stable] | |
| * headers: linux-headers-[stable] | |
| * libc: glibc-[stable] | |
| * Extra: gdb: DO IT | |
| * CROSSDEV_OVERLAY: /usr/local/portage/crossdev | |
| * PORT_LOGDIR: /var/log/portage | |
| * PORTAGE_CONFIGROOT: / | |
| * Portage flags: --quiet -uNv --with-bdeps=y --select --usepkg --getbinpkg --jobs=4 | |
| * getting sys-libs/glibc from /mnt/host/source/src/third_party/coreos-overlay | |
| * getting sys-devel/gdb from /mnt/host/source/src/third_party/coreos-overlay | |
| * leaving metadata/layout.conf alone in /usr/local/portage/crossdev | |
| Installing existing binaries | |
| >>> Jobs: 0 of 0 complete Load avg: 2.88, 1.80, 1.06 | |
| * Switching cross-compiler to x86_64-cros-linux-gnu-9.3.0 ... | |
| * Updating LTO plugin symlink in /usr/x86_64-pc-linux-gnu/x86_64-cros-linux-gnu/binutils-bin/lib/bfd-plugins | |
| [ ok ] | |
| [91mINFO update_chroot: Updating all SDK packages | |
| [0m[91m | |
| !!! Your current profile is deprecated and not supported anymore. | |
| !!! Use eselect profile to update your profile. | |
| !!! Please upgrade to the following profile if possible: | |
| default/linux/amd64/17.1/no-multilib/hardened | |
| To upgrade do the following steps: | |
| The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' | |
| multilib layout, and require an explicit migration. | |
| The migration is performed using the app-portage/unsymlink-lib tool. | |
| The following steps can be used to upgrade your system: | |
| 1. Sync and upgrade your system to the newest package versions | |
| to reduce the risk of issues. | |
| 2. Install the tool: | |
| # emerge -1v app-portage/unsymlink-lib | |
| 3. Run 'unsymlink-lib --analyze' and check the output for obvious | |
| mistakes. If you need to perform any changes to the system, remember | |
| to run 'unsymlink-lib --analyze' again afterwards. | |
| [past this point do not call emerge or modify /usr manually] | |
| [0m[91m4. This is a very good time to make a backup. | |
| 5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see | |
| what is going to happen. | |
| 6. Reboot your system. Check if important programs work. | |
| In particular, verify that e.g. 'emerge --info' works (but do not | |
| install anything). If you hit any serious problems, you can use | |
| [0m[91m 'unsymlink-lib --rollback' to revert the changes and return to | |
| step 3. | |
| 7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see | |
| what is going to happen but note that you're going to see a very long | |
| list of files to remove. | |
| 8. Switch the profile, e.g.: | |
| [0m[91m # eselect profile set default/linux/amd64/17.1/desktop | |
| [at this point you can start using emerge again. emerge will then | |
| not display this message anymore, but the remaining steps are still | |
| required!] | |
| [0m[91m | |
| 9. Rebuild gcc: | |
| # emerge -1v sys-devel/gcc:9.3.0 | |
| [ repeat for other slots you will be using ] | |
| [0m[91m | |
| 10. If you are using a multilib profile, rebuild all 32-bit packages. | |
| This can be done using: | |
| # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 | |
| 11. Once the last 32-bit package is rebuilt, your package manager | |
| should remove the orphaned /lib32 and /usr/lib32 symlinks. If that | |
| does not happen, remove them manually: | |
| # rm /lib32 /usr/lib32 | |
| For known issues, please see bug #506276 [1]. If you have any problems | |
| with the new profiles or the migration procedure, please report a bug | |
| and make it block the tracker. | |
| [1] https://bugs.gentoo.org/506276 | |
| [0m | |
| These are the packages that would be merged, in order: | |
| Calculating dependencies ..... .. .. ...... . ... done! | |
| Total: 0 packages, Size of downloads: 0 KiB | |
| [91mINFO update_chroot: Removing obsolete packages | |
| [0memerge: 'unavailable' is an empty set | |
| emerge: no targets left after set expansion | |
| Scanning Configuration files... | |
| Exiting: Nothing left to do; exiting. :) | |
| [91mINFO update_chroot: Elapsed time (update_chroot): 2m59s | |
| [0mRemoving intermediate container 7b5289dc3ce9 | |
| ---> 121f4e894951 | |
| Step 32/34 : RUN /home/sdk/sdk_entry.sh ./setup_board --board="arm64-usr" | |
| ---> Running in 2417ce34974a | |
| [91mbash: cannot set terminal process group (1): Inappropriate ioctl for device | |
| bash: no job control in this shell | |
| [0m[91mINFO update_chroot: Setting up portage... | |
| [0m[91mfind: '/mnt/host/source/config/portage/repos': No such file or directory | |
| [0m[91mINFO update_chroot: Setting up crossdev... | |
| [0m[91mINFO update_chroot: Updating chroot: | |
| [0m[91mINFO update_chroot: chroot version: 3005.0.0+2021-10-15-1135 | |
| [0m[91mINFO update_chroot: Flatcar version: 3005.0.0+2021-10-15-1138 | |
| [0m[91mINFO update_chroot: Updating basic system packages | |
| [0m>>> Jobs: 0 of 0 complete Load avg: 2.40, 1.97, 1.21 | |
| * Switching native-compiler to x86_64-pc-linux-gnu-9.3.0 ... | |
| * Updating LTO plugin symlink in /usr/x86_64-pc-linux-gnu/binutils-bin/lib/bfd-plugins | |
| [ ok ] | |
| [91mINFO update_chroot: Updating cross aarch64-cros-linux-gnu toolchain | |
| [0mInstalling existing binaries | |
| >>> Jobs: 0 of 0 complete Load avg: 2.26, 1.96, 1.21 | |
| * Switching cross-compiler to aarch64-cros-linux-gnu-9.3.0 ... | |
| * Updating LTO plugin symlink in /usr/x86_64-pc-linux-gnu/aarch64-cros-linux-gnu/binutils-bin/lib/bfd-plugins | |
| [ ok ] | |
| [91mINFO update_chroot: Updating all SDK packages | |
| [0m[91m | |
| !!! Your current profile is deprecated and not supported anymore. | |
| !!! Use eselect profile to update your profile. | |
| !!! Please upgrade to the following profile if possible: | |
| default/linux/amd64/17.1/no-multilib/hardened | |
| To upgrade do the following steps: | |
| The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB' | |
| multilib layout, and require an explicit migration. | |
| The migration is performed using the app-portage/unsymlink-lib tool. | |
| The following steps can be used to upgrade your system: | |
| 1. Sync and upgrade your system to the newest package versions | |
| to reduce the risk of issues. | |
| 2. Install the tool: | |
| # emerge -1v app-portage/unsymlink-lib | |
| [0m[91m3. Run 'unsymlink-lib --analyze' and check the output for obvious | |
| [0m[91m mistakes. If you need to perform any changes to the system, remember | |
| to run 'unsymlink-lib --analyze' again afterwards. | |
| [past this point do not call emerge or modify /usr manually] | |
| 4. This is a very good time to make a backup. | |
| 5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see | |
| what is going to happen. | |
| 6. Reboot your system. Check if important programs work. | |
| In particular, verify that e.g. 'emerge --info' works (but do not | |
| install anything). If you hit any serious problems, you can use | |
| 'unsymlink-lib --rollback' to revert the changes and return to | |
| step 3. | |
| 7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see | |
| what is going to happen but note that you're going to see a very long | |
| list of files to remove. | |
| 8. Switch the profile, e.g.: | |
| # eselect profile set default/linux/amd64/17.1/desktop | |
| [at this point you can start using emerge again. emerge will then | |
| not display this message anymore, but the remaining steps are still | |
| [0m[91m required!] | |
| 9. Rebuild gcc: | |
| # emerge -1v sys-devel/gcc:9.3.0 | |
| [ repeat for other slots you will be using ] | |
| 10. If you are using a multilib profile, rebuild all 32-bit packages. | |
| This can be done using: | |
| # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32 | |
| 11. Once the last 32-bit package is rebuilt, your package manager | |
| should remove the orphaned /lib32 and /usr/lib32 symlinks. If that | |
| does not happen, remove them manually: | |
| # rm /lib32 /usr/lib32 | |
| For known issues, please see bug #506276 [1]. If you have any problems | |
| with the new profiles or the migration procedure, please report a bug | |
| and make it block the tracker. | |
| [1] https://bugs.gentoo.org/506276 | |
| [0m | |
| These are the packages that would be merged, in order: | |
| Calculating dependencies . ... done! | |
| Total: 0 packages, Size of downloads: 0 KiB | |
| [91mINFO update_chroot: Removing obsolete packages | |
| [0memerge: 'unavailable' is an empty set | |
| emerge: no targets left after set expansion | |
| Scanning Configuration files... | |
| Exiting: Nothing left to do; exiting. :) | |
| [91mINFO update_chroot: Elapsed time (update_chroot): 0m30s | |
| [0m[91mINFO setup_board: Configuring portage in /build/arm64-usr | |
| [0m[91mWARNING: 'portageq envvar PORTDIR' is deprecated. Use any of 'get_repos, get_repo_path, repos_config' instead. | |
| [0m[91mWARNING: 'portageq envvar PORTDIR_OVERLAY' is deprecated. Use any of 'get_repos, get_repo_path, repos_config' instead. | |
| [0m[91mINFO setup_board: Generating wrapper scripts | |
| [0m[91mINFO setup_board: Performing package updates... | |
| [0m[91mINFO setup_board: Installing baselayout | |
| [0m[91m | |
| !!! Error fetching binhost package info from 'https://mirror.release.flatcar-linux.net/boards/arm64-usr/3005.0.0/pkgs' | |
| !!! HTTP Error 404: Not Found | |
| [0m[91m | |
| !!! Error fetching binhost package info from 'https://mirror.release.flatcar-linux.net/boards/arm64-usr/3005.0.0/toolchain' | |
| !!! HTTP Error 404: Not Found | |
| [0m>>> Verifying ebuild manifests | |
| >>> Emerging (1 of 1) sys-apps/baselayout-3.6.8-r1::coreos for /build/arm64-usr/ | |
| >>> Installing (1 of 1) sys-apps/baselayout-3.6.8-r1::coreos to /build/arm64-usr/ | |
| * Messages for package sys-apps/baselayout-3.6.8-r1 merged to /build/arm64-usr/: | |
| * Log file: /build/arm64-usr/var/log/portage/sys-apps:baselayout-3.6.8-r1:20211015-113848.log | |
| * Falling back to fetching from remote git repository... | |
| * git-r3: git protocol is completely unsecure and may render the ebuild | |
| * easily susceptible to MITM attacks (even if used only as fallback). Please | |
| * use https instead. | |
| * [URI: git://github.com/flatcar-linux/baselayout.git] | |
| * Creating /etc/init.d/functions.sh symlink... | |
| [91mINFO setup_board: Installing toolchain | |
| [0m[91m | |
| !!! Error fetching binhost package info from 'https://mirror.release.flatcar-linux.net/boards/arm64-usr/3005.0.0/pkgs' | |
| !!! HTTP Error 404: Not Found | |
| [0m[91m | |
| !!! Error fetching binhost package info from 'https://mirror.release.flatcar-linux.net/boards/arm64-usr/3005.0.0/toolchain' | |
| !!! HTTP Error 404: Not Found | |
| [0m[91m | |
| emerge: there are no binary packages to satisfy "sys-devel/binutils" for /build/arm64-usr/. | |
| emerge: searching for similar names...[0m[91m nothing similar found. | |
| [0m[91mERROR setup_board: script called: setup_board '--board=arm64-usr' | |
| [0m[91mERROR setup_board: Backtrace: (most recent call is last) | |
| [0m[91mERROR setup_board: file setup_board, line 330, called: die_err_trap '"${EMERGE_WRAPPER}" --usepkgonly --getbinpkg --rebuilt-binaries n ${EMERGE_TOOLCHAIN_FLAGS} "${TOOLCHAIN_PKGS[@]}"' '1' | |
| [0m[91mERROR setup_board: | |
| [0m[91mERROR setup_board: Command failed: | |
| [0m[91mERROR setup_board: Command '"${EMERGE_WRAPPER}" --usepkgonly --getbinpkg --rebuilt-binaries n ${EMERGE_TOOLCHAIN_FLAGS} "${TOOLCHAIN_PKGS[@]}"' exited with nonzero code: 1 | |
| [0m[91mERROR setup_board: (Note bash sometimes misreports "command not found" as exit code 1 instead of 127) | |
| [0mThe command '/bin/sh -c /home/sdk/sdk_entry.sh ./setup_board --board="arm64-usr"' returned a non-zero code: 1 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment