Mihomo for OpenWrt, don't use the hearse anymore! 在 OpenWrt 中运行原神，不要再使用灵车脚本啦！

mihomo-for-openwrt.md

Prerequisites

• OpenWrt/ImmortalWrt 23.05+
• Assume your routing system is arm64 architecture

NOTE Unless otherwise specified, all the following commands are executed in the router terminal.

Update: 2024-07-20 Packaged: https://github.com/douglarek/mihomo-openwrt

Install deps

    opkg update
    opkg install kmod-tun kmod-inet-diag curl

Prepare

1. Obtain mihomo release

    curl -L https://github.com/MetaCubeX/mihomo/releases/download/v1.18.6/mihomo-linux-arm64-v1.18.6.gz -o mihomo-linux-arm64-v1.18.6.gz
    gzip -d mihomo-linux-arm64-v1.18.6.gz
    chmod +x mihomo-linux-arm64-v1.18.6
    mv mihomo-linux-arm64-v1.18.6 /usr/bin/mihomo
   

2. Create the /etc/config/mihomo file and populate it

    config mihomo 'main'
            option enabled '1'
            option user 'root'
            option conffile '/etc/mihomo/config.yaml'
            option workdir '/usr/share/mihomo'
            list ifaces 'wan'
            option log_stderr '1'
            option log_stdout '1'
   

3. Create the /etc/init.d/mihomo file and populate it

    #!/bin/sh /etc/rc.common
   
    USE_PROCD=1
    START=99
   
    script=$(readlink "$initscript")
    NAME="$(basename ${script:-$initscript})"
    PROG="/usr/bin/mihomo"
   
    start_service() {
            config_load "$NAME"
   
            local enabled user group conffile workdir ifaces
            local log_stdout log_stderr
            config_get_bool enabled "main" "enabled" "0"
            [ "$enabled" -eq "1" ] || return 0
   
            config_get user "main" "user" "root"
            config_get conffile "main" "conffile"
            config_get ifaces "main" "ifaces"
            config_get workdir "main" "workdir" "/usr/share/mihomo"
            config_get_bool log_stdout "main" "log_stdout" "1"
            config_get_bool log_stderr "main" "log_stderr" "1"
   
            mkdir -p "$workdir"
            local group="$(id -ng $user)"
            chown $user:$group "$workdir"
   
            procd_open_instance "$NAME.main"
            procd_set_param command "$PROG" -f "$conffile" -d "$workdir"
   
            # Use root user if you want to use the TUN mode.
            procd_set_param user "$user"
            procd_set_param file "$conffile"
            [ -z "$ifaces" ] || procd_set_param netdev $ifaces
            procd_set_param stdout "$log_stdout"
            procd_set_param stderr "$log_stderr"
            procd_set_param respawn
   
            procd_close_instance
    }
   
    service_triggers() {
            local ifaces
            config_load "$NAME"
            config_get ifaces "main" "ifaces"
            procd_open_trigger
            for iface in $ifaces; do
                    procd_add_interface_trigger "interface.*.up" $iface /etc/init.d/$NAME restart
            done
            procd_close_trigger
            procd_add_reload_trigger "$NAME"
    }
   

   Grant executable permissions:

    chmod +x /etc/init.d/mihomo
   

4. Create the /etc/mihomo/config.yaml file and populate it

    # Omitting any other unimportant configurations, I believe you will definitely
   
    tun:
      enable: true
      stack: mixed
      dns-hijack:
        - "any:53"
      auto-route: true
      auto-redirect: true # Key configuration, the above is actually all nonsense.
      auto-detect-interface: true
   
    dns:
      enable: true
      nameserver: [ 223.5.5.5 ]
      nameserver-policy:
        'geosite:geolocation-!cn,tiktok': tls://8.8.4.4
        'sgshort.wechat.com': tls://8.8.4.4
   
   
    # ......
   

Launch

1. Start the service

    service mihomo start
   

2. View logs

    logread -l 100 -f | grep mihomo
   

3. About the ui download

   Assume your UI configuration is as follows:

    external-controller: 0.0.0.0:9090 # If you can't handle it, it's not recommended to use 0.0.0.0 binding. for example, use your router address
    external-ui: ui
    external-ui-url: "https://mirror.ghproxy.com/https://github.com/MetaCubeX/metacubexd/archive/refs/heads/gh-pages.zip"
    secret: "123654" # change to your own
   

   After starting the mihomo service, use the API to download UI static files:

    curl -H 'Authorization: Bearer 123654' http://127.0.0.1:9090/upgrade/ui -X POST
   

   If there are no errors, it will return a successful download status:

    {"status":"ok"}
   

   Where did the UI download to? Take this article as an example:

    /usr/share/mihomo/ui/
   

   Finally, use the router address to access the UI:

    http://[your-router-address]:9090/ui
   

如果手动配置路由就不用在重启 wan 口的时候重启 mihomo 了吧