66rc.conf.sh

[id@void-live etc]$ bat --pager=never -lbash /etc/66rc.conf 
───────┬────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
       │ File: /etc/66rc.conf
───────┼────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
   1   │ # Copyright (c) 2015-2021 Eric Vidal <[email protected]>
   2   │ # All rights reserved.
   3   │ #
   4   │ # This file is part of Obarun. It is subject to the license terms in
   5   │ # the LICENSE file found in the top-level directory of this
   6   │ # distribution.
   7   │ # This file may not be copied, modified, propagated, or distributed
   8   │ # except according to the terms contained in the LICENSE file.
   9   │ #
  10   │ # System configuration file for a boot process running s6/s6-rc
  11   │ # supervision suite and handled by 66 suite program.
  12   │ #
  13   │ # Do not use quotes or double-quotes on this file
  14   │ #
  15   │ # The '!' is used to not export the variable on the environment.
  16   │ # If you want to keep it, remove the exclamation mark '!'.
  17   │ #
  18   │ 
  19   │ #========================== WARNING ====================================
  20   │ 
  21   │ #
  22   │ # Do not forget to enable again the boot@ module after editing
  23   │ # this file to apply your changes at the next reboot e.g:
  24   │ # 66-enable -F -t boot boot@system
  25   │ #
  26   │ 
  27   │ #======================= Global Settings ===============================
  28   │ 
  29   │ ## Set your HOSTNAME.
  30   │ 
  31   │ HOSTNAME=!voidlinux
  32   │ 
  33   │ ## Set your timezone, available timezones can be found at /usr/share/zoneinfo.
  34   │ 
  35   │ TZ=!Europe/Madrid
  36   │ 
  37   │ ## Set the number of tty(s) to start.
  38   │ ## 0 means no tty. Maximum is 11.
  39   │ 
  40   │ TTY=!4
  41   │ 
  42   │ ## Console keymap to load, see loadkeys(8).
  43   │ 
  44   │ KEYMAP=!us
  45   │ 
  46   │ ## Console font to load, see setfont(8).
  47   │ 
  48   │ FONT=!lat9w-16
  49   │ 
  50   │ ## Console map to load, see setfont(8).
  51   │ 
  52   │ #FONT_MAP=
  53   │ 
  54   │ ## Console unimap to load, see setfont(8).
  55   │ 
  56   │ #FONT_UNIMAP=
  57   │ 
  58   │ 
  59   │ #========================== Devices ====================================
  60   │ 
  61   │ ## Mount devices from FSTAB file [yes|no].
  62   │ 
  63   │ FSTAB=!yes
  64   │ 
  65   │ ## Active swap [yes|no].
  66   │ 
  67   │ SWAP=!no
  68   │ 
  69   │ ## Active lvm devices [yes|no].
  70   │ 
  71   │ LVM=!no
  72   │ 
  73   │ ## Active dmraid devices [yes|no].
  74   │ 
  75   │ DMRAID=!no
  76   │ 
  77   │ ## Active btrfs devices [yes|no].
  78   │ 
  79   │ BTRFS=!no
  80   │ 
  81   │ ## Mount zfs devices [yes|no].
  82   │ 
  83   │ ZFS=!no
  84   │ 
  85   │ ## Zpool Import method [scan|zpoolcache]
  86   │ ## It has no effects if ZFS is set to no or commented.
  87   │ 
  88   │ ZFS_IMPORT=!zpoolcache
  89   │ 
  90   │ 
  91   │ #=======================================================================
  92   │ 
  93   │ 
  94   │ #=================== Advanced user configuration =======================
  95   │ 
  96   │ #
  97   │ # If you don't know what the following variables do, you
  98   │ # don't need to change them. The machine will still boot
  99   │ # with the default values
 100   │ #
 101   │ 
 102   │ #=======================================================================
 103   │ 
 104   │ 
 105   │ #====================== System configuration ===========================
 106   │ 
 107   │ ## Setup the console
 108   │ ## If set to no, KEYMAP,FONT,FONT_MAP,FONT_UNIMAP has no effects
 109   │ 
 110   │ SETUPCONSOLE=!yes
 111   │ 
 112   │ ## Set RTC [UTC|localtime].
 113   │ 
 114   │ HARDWARECLOCK=localtime
 115   │ 
 116   │ ## Use udev [yes|no]
 117   │ ## If set to no the following variables has no effects or set to no:
 118   │ ## SETUPCONSOLE, KEYMAP, FONT, FONT_MAP, FONT_UNIMAP, CRYPTTAB, DMRAID,
 119   │ ## BTRFS, LVM
 120   │ 
 121   │ UDEV=!yes
 122   │ 
 123   │ ## Kernel configuration with sysctl [yes|no].
 124   │ 
 125   │ SYSCTL=!yes
 126   │ 
 127   │ ## Force a check of filesystem partition [yes|no].
 128   │ 
 129   │ FORCECHCK=!no
 130   │ 
 131   │ ## Use rc.local script [yes|no].
 132   │ 
 133   │ LOCAL=!no
 134   │ 
 135   │ ## Boot inside a container [yes|no].
 136   │ ## If set to yes the following variables have no effect or are set to no:
 137   │ ## HARDWARECLOCK, SETUPCONSOLE, KEYMAP, FONT, FONT_MAP, FONT_UNIMAP, CRYPTTAB
 138   │ ## SWAP, LVM, DMRAID, BTRFS, ZFS, UDEV, SYSCTL, FORCECHCK, CGROUPS
 139   │ ## MODULE_SYSTEM, RANDOMSEED, MNT_NETFS
 140   │ 
 141   │ CONTAINER=!no
 142   │ 
 143   │ ## Load kernel modules [yes|no].
 144   │ 
 145   │ MODULE_KERNEL=!yes
 146   │ 
 147   │ ## Load modules from modules.d files
 148   │ 
 149   │ MODULE_SYSTEM=!yes
 150   │ 
 151   │ ## Populate ramdom seed
 152   │ 
 153   │ RANDOMSEED=!yes
 154   │ 
 155   │ 
 156   │ #========================== Security ===================================
 157   │ 
 158   │ ## Active encrypted devices [yes|no].
 159   │ 
 160   │ CRYPTTAB=!no
 161   │ 
 162   │ ## Firewall program to use [iptables|ip6tables|nftables|ebtables|arptables]
 163   │ ## Comment to not use any firewall at all.
 164   │ 
 165   │ #FIREWALL=
 166   │ 
 167   │ 
 168   │ #========================== Pseudo filesystem ==========================
 169   │ 
 170   │ ## Mount cgroups [yes|no].
 171   │ 
 172   │ CGROUPS=!yes
 173   │ 
 174   │ ## Mount /proc directory [yes|no].
 175   │ 
 176   │ MNT_PROC=!yes
 177   │ 
 178   │ ## Mount /sys directory [yes|no].
 179   │ 
 180   │ MNT_SYS=!no
 181   │ 
 182   │ ## Mount /dev directory [yes|no].
 183   │ 
 184   │ MNT_DEV=!yes
 185   │ 
 186   │ ## Mount /run directory [yes|no].
 187   │ 
 188   │ MNT_RUN=!yes
 189   │ 
 190   │ ## Mount /tmp directory [yes|no].
 191   │ 
 192   │ MNT_TMP=!yes
 193   │ 
 194   │ ## Mount /dev/pts directory [yes|no].
 195   │ ## Only valuable if MNT_DEV is set to yes.
 196   │ 
 197   │ MNT_PTS=!yes
 198   │ 
 199   │ ## Mount /dev/shm directory [yes|no].
 200   │ ## Only valuable if MNT_DEV is set to yes.
 201   │ 
 202   │ MNT_SHM=!yes
 203   │ 
 204   │ ## Mount no-network filesystem [yes|no].
 205   │ ## Fstype mounted is: nosysfs,nonfs,nonfs4,nosmbfs,nocifs
 206   │ 
 207   │ MNT_NETFS=!yes
 208   │ 
 209   │ ## Create and mount /sys/firmware/efi/efivars, /sys/fs/fuse/connections,
 210   │ ## /sys/kernel/{config,debug,security} and /sys/kernel/debug/tracing
 211   │ ## if exist at /proc/filesystems
 212   │ 
 213   │ POPULATE_SYS=!yes
 214   │ 
 215   │ ## Create and mount /dev/{hugepages,mqueue}
 216   │ ## if exist at /proc/filesystems
 217   │ 
 218   │ POPULATE_DEV=!yes
 219   │ 
 220   │ ## Create /run/{lvm,user,lock,utmp} directories
 221   │ 
 222   │ POPULATE_RUN=!yes
 223   │ 
 224   │ ## Create /tmp/{.X11-unix,.ICE-unix} files
 225   │ 
 226   │ POPULATE_TMP=!yes
 227   │ 
───────┴────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────
[id@void-live etc]$