mako dmesg

gistfile1.txt

<6>[    0.000000] Booting Linux on physical CPU 0
<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.4.0-evervolv-ge64003f-00880-ge82fe1e (drew@master) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #6 SMP PREEMPT Thu Feb 14 23:55:45 CST 2013
<4>[    0.000000] CPU: ARMv7 Processor [510f06f2] revision 2 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<4>[    0.000000] Machine: QCT APQ8064 MAKO
<2>[    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
<6>[    0.000000] memory pool 3 (start fe9ff000 size 1600000) initialized
<6>[    0.000000] Initialized persistent memory from 88700000-887fffff
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<6>[    0.000000] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8,  hw_plat_ver=65536
<6>[    0.000000]  accessory_chip=0 hw_plat_subtype=1
<7>[    0.000000] On node 0 totalpages: 493055
<7>[    0.000000]   Normal zone: 1536 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 169984 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 2556 pages used for memmap
<7>[    0.000000]   HighMem zone: 318979 pages, LIFO batch:31
<6>[    0.000000] allocating 21626880 bytes at c2259000 (82459000 physical) for fb
<6>[    0.000000] PERCPU: Embedded 9 pages/cpu @c36fc000 s15744 r8192 d12928 u36864
<7>[    0.000000] pcpu-alloc: s15744 r8192 d12928 u36864 alloc=9*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 488963
<5>[    0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 uart_console=enable lcd_maker_id=primary lge.hreset=off lge.reset=mode_reset gpt=enable lge.kcal=0|0|0|x lge.rev=rev_10 mdm_force_dump_enabled androidboot.emmc=true androidboot.serialno=003cd3428d49a115 androidboot.bootloader=MAKOZ10o androidboot.baseband=mdm bootreason=reboot
<6>[    0.000000] UART CONSOLE : enable
<6>[    0.000000] kcal is 0|0|0|x
<6>[    0.000000] kcal not calibrated yet : 120
<6>[    0.000000] set to default : 255
<6>[    0.000000] BOARD : LGE input rev_10 
<6>[    0.000000] BOARD : LGE matched rev_10 
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 134MB 74MB 7MB 1MB 253MB 1456MB = 1925MB total
<5>[    0.000000] Memory: 1915592k/1998536k available, 56628k reserved, 1286140K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     timers  : 0xfffef000 - 0xffff0000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .text : 0xc0008000 - 0xc0b74b70   (11699 kB)
<5>[    0.000000]       .init : 0xc0c00000 - 0xc0d03d80   (1040 kB)
<5>[    0.000000]       .data : 0xc0d04000 - 0xc0df68d0   ( 971 kB)
<5>[    0.000000]        .bss : 0xc0df68f4 - 0xc1090574   (2664 kB)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:921
<6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30520ns, wraps every 131084001ms
<6>[    0.000000] Switching to timer-based delay loop
<6>[    0.000000] Console: colour dummy device 80x30
<6>[    0.000183] Calibrating delay loop (skipped) preset value.. 13.53 BogoMIPS (lpj=67677)
<6>[    0.000213] pid_max: default: 32768 minimum: 301
<6>[    0.000518] Mount-cache hash table entries: 512
<6>[    0.001709] Initializing cgroup subsys debug
<6>[    0.001739] Initializing cgroup subsys cpuacct
<6>[    0.001739] Initializing cgroup subsys freezer
<6>[    0.001861] CPU: Testing write buffer coherency: ok
<6>[    0.002105] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[    0.002136] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
<6>[    0.002227] Setting up static identity map for 0x809c5de0 - 0x809c5e68
<6>[    0.005402] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[    0.007843] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
<6>[    0.010315] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
<6>[    0.010437] Brought up 4 CPUs
<6>[    0.010437] SMP: Total of 4 processors activated (54.14 BogoMIPS).
<6>[    0.025606] dummy: 
<6>[    0.025972] NET: Registered protocol family 16
<3>[    0.026918] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
<6>[    0.029452] meminfo_init: smem ram ptable found: ver: 0 len: 6
<6>[    0.029482] Found 2 memory banks grouped into 16 memory regions
<6>[    0.029665] gpiochip_add: registered GPIOs 0 to 151 on device: msmgpio
<6>[    0.030428] socinfo_init: v6, id=109, ver=1.1, raw_id=1817, raw_ver=1817, hw_plat=8,  hw_plat_ver=65536
<6>[    0.030428]  accessory_chip=0 hw_plat_subtype=1
<6>[    0.030520] msm_rpm_init: RPM firmware 3.0.16842886
<3>[    0.048527] msm_rpm_get_status(): Status id 341 not defined for target
<3>[    0.048527] msm_rpm_get_status(): Status id 341 not defined for target
<3>[    0.048527] msm_rpm_get_status(): Status id 341 not defined for target
<3>[    0.048557] msm_rpm_get_status(): Status id 341 not defined for target
<3>[    0.048557] msm_rpm_get_status(): Status id 341 not defined for target
<3>[    0.048588] msm_rpm_get_status(): Status id 341 not defined for target
<3>[    0.048588] msm_rpm_get_status(): Status id 341 not defined for target
<3>[    0.048588] msm_rpm_get_status(): Status id 341 not defined for target
<6>[    0.050022] pm8921_probe: PMIC revision 1: F4
<6>[    0.050022] pm8921_probe: PMIC revision 2: 06
<6>[    0.050053] pm8921_probe: PMIC version: PM8921 rev 3.0
<6>[    0.050053] pm8921_probe: PMIC Restart Reason: Triggered from CHG (usb charger insertion)
<6>[    0.051182] gpiochip_add: registered GPIOs 152 to 195 on device: pm-gpio
<6>[    0.051701] pm_gpio_probe: OK: base=152, ngpio=44
<6>[    0.051976] gpiochip_add: registered GPIOs 196 to 207 on device: pm8xxx-mpp
<6>[    0.052037] pm8xxx_mpp_probe: OK: base=196, ngpio=12
<6>[    0.054021] pm8821_probe: PMIC revision 1: PM8821 rev F3
<6>[    0.054021] pm8821_probe: PMIC revision 2: PM8821 rev 0B
<6>[    0.054051] pm8821_probe: PMIC version: PM8821 ver 2.1
<6>[    0.054600] gpiochip_add: registered GPIOs 208 to 211 on device: pm8xxx-mpp
<6>[    0.054631] pm8xxx_mpp_probe: OK: base=208, ngpio=4
<6>[    0.055028] gpio_vreg_probe: id=86, name=ext_dsv_load, gpio=86, gpio_label=ext_dsv_load_en
<6>[    0.056249] saw_probe: id=0, name=8921_s5
<6>[    0.056554] saw_probe: id=1, name=8921_s6
<6>[    0.056889] saw_probe: id=2, name=8821_s0
<6>[    0.057195] saw_probe: id=3, name=8821_s1
<6>[    0.065588] persistent_ram: found existing buffer, size 225700, start 206456
<6>[    0.723271] console [ram-1] enabled
<6>[    0.724645] [NORMAL-DEBUG] apq8064_device_uart_gsbi4.id : 0
<6>[    0.724736] [DEBUG] uart_enable : 1
<6>[    0.727300] [Touch D] apq8064_init_input: NOT DCM KDDI, reg synaptics driver 
<6>[    0.727575] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[    0.727727] hw-breakpoint: maximum watchpoint size is 8 bytes.
<6>[    0.731084] sps:REVISION of BAM 0xf0068000 is 0x5.
<6>[    0.731207] sps:BAM 0x12244000 is registered.
<6>[    0.731664] sps:sps is ready.
<6>[    0.759865] bio: create slab <bio-0> at 0
<6>[    0.760567] ION heap vmalloc created
<6>[    0.760659] ION heap mm created at a0000000 with size 3800000
<6>[    0.760842] ION heap mm_fw created at 9fe00000 with size 1e0000
<6>[    0.760964] ION heap mfc created at a3800000 with size 2000
<6>[    0.761117] ION heap iommu created
<6>[    0.761239] ION heap qsecom created at fea02000 with size 780000
<6>[    0.761452] ION heap audio created at ff182000 with size 4cf000
<5>[    0.762612] pm8xxx_pwm_probe: OK
<5>[    0.763467] SCSI subsystem initialized
<6>[    0.763741] sps:REVISION of BAM 0xf0070000 is 0x12.
<6>[    0.763924] sps:BAM 0x28084000 is registered.
<6>[    0.764779] usbcore: registered new interface driver usbfs
<6>[    0.765023] usbcore: registered new interface driver hub
<6>[    0.765298] usbcore: registered new device driver usb
<6>[    0.765695] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-pwrkey/input/input0
<6>[    0.766610] Linux media interface: v0.10
<6>[    0.766763] Linux video capture interface: v2.00
<7>[    0.767282] Registered led device: red
<7>[    0.767678] Registered led device: green
<7>[    0.768075] Registered led device: blue
<6>[    0.769052] msm_iommu_dev: device vpe mapped at f0400000, with 2 ctx banks
<6>[    0.769265] msm_iommu_dev: device mdp0 mapped at f0600000, with 2 ctx banks
<6>[    0.769571] msm_iommu_dev: device mdp1 mapped at f0800000, with 2 ctx banks
<6>[    0.769845] msm_iommu_dev: device rot mapped at f0a00000, with 2 ctx banks
<6>[    0.770059] msm_iommu_dev: device ijpeg mapped at f0c00000, with 2 ctx banks
<6>[    0.770364] msm_iommu_dev: device vfe mapped at f0e00000, with 2 ctx banks
<6>[    0.770578] msm_iommu_dev: device vcodec_a mapped at f1000000, with 2 ctx banks
<6>[    0.770853] msm_iommu_dev: device vcodec_b mapped at f1200000, with 2 ctx banks
<6>[    0.771127] msm_iommu_dev: device gfx3d mapped at f1400000, with 3 ctx banks
<6>[    0.771341] msm_iommu_dev: device jpegd mapped at f1600000, with 2 ctx banks
<6>[    0.771646] msm_iommu_dev: device gfx3d1 mapped at f1800000, with 3 ctx banks
<6>[    0.771921] msm_iommu_dev: device vcap mapped at f1a00000, with 2 ctx banks
<6>[    0.772409] msm_iommu_ctx msm_iommu_ctx.2: context vpe_src using bank 0
<6>[    0.772684] msm_iommu_ctx msm_iommu_ctx.3: context vpe_dst using bank 1
<6>[    0.772928] msm_iommu_ctx msm_iommu_ctx.4: context mdp_port0_cb0 using bank 0
<6>[    0.773233] msm_iommu_ctx msm_iommu_ctx.5: context mdp_port0_cb1 using bank 1
<6>[    0.773569] msm_iommu_ctx msm_iommu_ctx.6: context mdp_port1_cb0 using bank 0
<6>[    0.773813] msm_iommu_ctx msm_iommu_ctx.7: context mdp_port1_cb1 using bank 1
<6>[    0.774118] msm_iommu_ctx msm_iommu_ctx.8: context rot_src using bank 0
<6>[    0.774332] msm_iommu_ctx msm_iommu_ctx.9: context rot_dst using bank 1
<6>[    0.774637] msm_iommu_ctx msm_iommu_ctx.10: context ijpeg_src using bank 0
<6>[    0.774912] msm_iommu_ctx msm_iommu_ctx.11: context ijpeg_dst using bank 1
<6>[    0.775156] msm_iommu_ctx msm_iommu_ctx.12: context vfe_imgwr using bank 0
<6>[    0.775461] msm_iommu_ctx msm_iommu_ctx.13: context vfe_misc using bank 1
<6>[    0.775705] msm_iommu_ctx msm_iommu_ctx.14: context vcodec_a_stream using bank 0
<6>[    0.776010] msm_iommu_ctx msm_iommu_ctx.15: context vcodec_a_mm1 using bank 1
<6>[    0.776346] msm_iommu_ctx msm_iommu_ctx.16: context vcodec_b_mm2 using bank 0
<6>[    0.776651] msm_iommu_ctx msm_iommu_ctx.17: context gfx3d_user using bank 0
<6>[    0.776987] msm_iommu_ctx msm_iommu_ctx.18: context gfx3d_priv using bank 1
<6>[    0.777292] msm_iommu_ctx msm_iommu_ctx.0: context jpegd_src using bank 0
<6>[    0.777506] msm_iommu_ctx msm_iommu_ctx.1: context jpegd_dst using bank 1
<6>[    0.777842] msm_iommu_ctx msm_iommu_ctx.19: context gfx3d1_user using bank 0
<6>[    0.778116] msm_iommu_ctx msm_iommu_ctx.20: context gfx3d1_priv using bank 1
<6>[    0.778422] msm_iommu_ctx msm_iommu_ctx.21: context vcap_vc using bank 0
<6>[    0.778727] msm_iommu_ctx msm_iommu_ctx.22: context vcap_vp using bank 1
<6>[    0.778971] Advanced Linux Sound Architecture Driver Version 1.0.25.
<6>[    0.779642] Bluetooth: Core ver 2.16
<6>[    0.779795] NET: Registered protocol family 31
<6>[    0.779948] Bluetooth: HCI device and connection manager initialized
<6>[    0.780039] Bluetooth: HCI socket layer initialized
<6>[    0.780192] Bluetooth: L2CAP socket layer initialized
<6>[    0.780466] Bluetooth: SCO socket layer initialized
<6>[    0.780833] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.781565] earjack debugger probed
<6>[    0.782572] Switching to clocksource gp_timer
<6>[    0.811597] NET: Registered protocol family 2
<6>[    0.811933] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.812665] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    0.814039] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
<6>[    0.814832] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    0.814924] TCP: reno registered
<6>[    0.815107] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.815199] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[    0.815687] NET: Registered protocol family 1
<6>[    0.816053] Trying to unpack rootfs image as initramfs...
<6>[    0.838882] Freeing initrd memory: 352K
<6>[    0.840378] Detected 5 counters on the L2CC PMU.
<6>[    0.842698] pil_qdsp6v4 pil_qdsp6v4.0: using secure boot
<6>[    0.844864] pil_riva pil_riva: using secure boot
<6>[    0.848313] pil_dsps pil_dsps: using secure boot
<6>[    0.850114] pil_gss pil_gss: using secure boot
<3>[    0.852739] smd_channel_probe_worker: allocation table not initialized
<6>[    0.857622] msm_dsps driver version 4.02.
<6>[    0.859056] NET: Registered protocol family 27
<6>[    0.861590] lpass_fatal_init: lpass SSR driver init'ed.
<6>[    0.861864] wcnss_8960: module initialized
<6>[    0.862261] gss_8064_init: gss fatal driver init'ed.
<6>[    0.862994] acpuclk-8064 acpuclk-8064: ACPU PVS: Fast
<6>[    0.865466] acpuclk-8064 acpuclk-8064: CPU0: 12 frequencies supported
<6>[    0.865618] acpuclk-8064 acpuclk-8064: CPU1: 12 frequencies supported
<6>[    0.865710] acpuclk-8064 acpuclk-8064: CPU2: 12 frequencies supported
<6>[    0.865893] acpuclk-8064 acpuclk-8064: CPU3: 12 frequencies supported
<6>[    0.867327] kcal_ctrl_init 
<6>[    0.867968] persistent_ram: no valid data in buffer (sig = 0x4e4f524d)
<5>[    0.868731] msm_rpm_log_probe: OK
<3>[    0.872272] mdm_do_first_power_on: Powering on modem for the first time
<6>[    0.949671] mdm_pblrdy_change: pbl ready:1
<6>[    1.163131] mdm_common_create: Registering mdm modem
<6>[    1.164535] usbcore: registered new interface driver hsic_sysmon
<4>[    1.167831] highmem bounce pool size: 64 pages
<6>[    1.186723] fuse init (API version 7.18)
<6>[    1.187456] msgmni has been set to 1230
<6>[    1.191881] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
<6>[    1.192095] io scheduler noop registered
<6>[    1.192400] io scheduler deadline registered
<6>[    1.192614] io scheduler row registered (default)
<6>[    1.193254] io scheduler cfq registered
<6>[    1.194384] lm3530 probed
<6>[    1.198077] mipi_dsi base phy_addr = 0x4700000 virt = 0xf1c00000
<6>[    1.198290] mmss_sfpb  base phy_addr = 0x5700000,virt = 0xf0082000
<6>[    1.199664] mipi_lgit_lcd_probe start
<6>[    1.199847] setting pdata->panel_info.fb_num to 3. type: 8
<6>[    1.212665] FrameBuffer[0] 768x1280 size=11796480 bytes is registered successfully!
<4>[    1.212940] load_565rle_image: Can not open /initlogo.rle
<7>[    1.213581] Registered led device: lcd-backlight
<6>[    1.213612] mdp4_dsi_vsync_init: ndx=0
<6>[    1.214832] setting pdata->panel_info.fb_num to 1. type: 7
<6>[    1.215779] FrameBuffer[1] 1920x1080 size=0 bytes is registered successfully!
<4>[    1.216023] load_565rle_image: Can not open /initlogo.rle
<6>[    1.216481] mdp4_dtv_vsync_init: ndx=0
<3>[    1.216725] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group cf9b6208
<6>[    1.217549] setting pdata->panel_info.fb_num to 1. type: 10
<3>[    1.217823] Inside writeback_driver_init
<3>[    1.218251] Inside writeback_probe
<6>[    1.218861] FrameBuffer[2] 1280x720 size=0 bytes is registered successfully!
<4>[    1.219166] load_565rle_image: Can not open /initlogo.rle
<6>[    1.220631] 
<6>[    1.220631]  msm_vidc_enc: Inside vid_enc_init()
<6>[    1.221120] 
<6>[    1.221120]  msm_vidc_enc: Inside vid_enc_vcd_init()
<6>[    1.222554] msm_serial_hs module loaded
<6>[    1.222951] msm_serial_hsl: detected port #0
<6>[    1.223226] msm_serial_hsl.0: ttyHSL0 at MMIO 0x16340000 (irq = 184) is a MSM
<6>[    1.223470] msm_serial_hsl: console setup on port #0
<6>[    1.223714] console [ttyHSL0] enabled
<6>[    1.224080] msm_serial_hsl: driver initialized
<6>[    1.225728] msm_rotator_probe: rotator_hw_revision=2
<6>[    1.228902] diagchar initialized now
<6>[    1.230337] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
<6>[    1.239188] brd: module loaded
<6>[    1.243277] loop: module loaded
<6>[    1.245719] anx7808 init gpio
<6>[    1.283076] anx7808 dvdd is already on 
<6>[    1.313108] sp_tx_hardware_poweron: anx7808 power on
<6>[    1.313993] sp_tx_chip_located: ANX7808 BA is found.
<5>[    1.315336] sp_tx_vbus_powerdown: 3.3V output disabled
<6>[    1.373142] sp_tx_hardware_powerdown: anx7808 power down
<5>[    1.373233] sp_tx_set_sys_state: SP_TX To System State: 
<5>[    1.373325] sp_tx_set_sys_state: STATE_CABLE_PLUG
<6>[    1.373996] tabla2x-slim tabla2x-slim: Platform data from board file
<6>[    1.470715] wcd9xxx_device_init : Codec version 2 initialized
<4>[    1.472058] i2c-core: driver [tabla-i2c-core] using legacy suspend method
<4>[    1.472211] i2c-core: driver [tabla-i2c-core] using legacy resume method
<6>[    1.473035] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver flags = 10
<6>[    1.473401] bcm2079x-i2c 0-a1fa: requesting IRQ 317
<6>[    1.473584] bcm2079x-i2c 0-a1fa: bcm2079x_probe, probing bcm2079x driver exited successfully
<6>[    1.474408] SCSI Media Changer driver v0.25 
<6>[    1.475446] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.475598] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[    1.475812] rmnet_init: BAM devices[8]
<6>[    1.482710] PPP generic driver version 2.4.2
<6>[    1.482954] PPP BSD Compression module registered
<6>[    1.483045] PPP Deflate Compression module registered
<6>[    1.485060] PPP MPPE Compression module registered
<6>[    1.485243] NET: Registered protocol family 24
<6>[    1.485640] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[    1.485975] CSLIP: code copyright 1989 Regents of the University of California.
<6>[    1.486311] wcnss_wlan probed in built-in mode
<6>[    1.487685] usbcore: registered new interface driver asix
<6>[    1.488020] usbcore: registered new interface driver cdc_ether
<6>[    1.488478] usbcore: registered new interface driver net1080
<6>[    1.488783] usbcore: registered new interface driver cdc_subset
<6>[    1.489211] usbcore: registered new interface driver zaurus
<6>[    1.489760] usbcore: registered new interface driver cdc_ncm
<6>[    1.490248] usbcore: registered new interface driver rmnet_usb
<6>[    1.491194] rmnet usb ctrl Initialized.
<6>[    1.491530] msm_otg msm_otg: msm_otg probe
<3>[    1.491927] msm_otg msm_otg: failed to get phy_clk
<6>[    1.492202] msm_otg msm_otg: OTG regs = f009a000
<6>[    1.495498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    1.508744] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
<6>[    1.508957] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
<6>[    1.533251] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
<6>[    1.553273] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
<6>[    1.553670] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    1.553792] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    1.553944] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
<6>[    1.554097] usb usb1: Manufacturer: Linux 3.4.0-evervolv-ge64003f-00880-ge82fe1e ehci_hcd
<6>[    1.554188] usb usb1: SerialNumber: msm_hsic_host
<6>[    1.554799] hub 1-0:1.0: USB hub found
<6>[    1.554921] hub 1-0:1.0: 1 port detected
<6>[    1.556203] usbcore: registered new interface driver cdc_acm
<6>[    1.556355] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    1.556538] Initializing USB Mass Storage driver...
<6>[    1.556752] usbcore: registered new interface driver usb-storage
<6>[    1.556905] USB Mass Storage support registered.
<6>[    1.557088] usbcore: registered new interface driver ums-alauda
<6>[    1.557271] usbcore: registered new interface driver ums-cypress
<6>[    1.557485] usbcore: registered new interface driver ums-datafab
<6>[    1.557729] usbcore: registered new interface driver ums-freecom
<6>[    1.557942] usbcore: registered new interface driver ums-isd200
<6>[    1.558156] usbcore: registered new interface driver ums-jumpshot
<6>[    1.558339] usbcore: registered new interface driver ums-karma
<6>[    1.558553] usbcore: registered new interface driver ums-onetouch
<6>[    1.558736] usbcore: registered new interface driver ums-sddr09
<6>[    1.559011] usbcore: registered new interface driver ums-sddr55
<6>[    1.559163] usbcore: registered new interface driver ums-usbat
<6>[    1.559468] usbcore: registered new interface driver usbserial
<6>[    1.559591] usbserial: USB Serial Driver core
<6>[    1.559835] usbcore: registered new interface driver qcserial
<6>[    1.559987] USB Serial support registered for Qualcomm USB modem
<6>[    1.560262] usbcore: registered new interface driver qc_csvt
<6>[    1.560384] USB Serial support registered for qc_csvt
<6>[    1.560628] usbcore: registered new interface driver usb_ehset_test
<6>[    1.560811] usbcore: registered new interface driver diag_bridge
<6>[    1.561086] usbcore: registered new interface driver mdm_bridge
<6>[    1.561605] msm_otg msm_otg: phy_reset: success
<6>[    1.562459] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 32
<6>[    1.562765] mbim_init: initialize 1 instances
<6>[    1.563039] mbim_init: Initialized 1 ports
<6>[    1.565084] rndis_qc_init: initialize rndis QC instance
<6>[    1.565542] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    1.565695] android_usb gadget: Number of LUNs=1
<6>[    1.565786]  lun0: LUN: removable file: (no medium)
<6>[    1.566305] android_usb gadget: android_usb ready
<6>[    1.567770] input: keypad_8064 as /devices/platform/msm_ssbi.0/pm8921-core/pm8xxx-keypad/input/input1
<4>[    1.568686] [Touch D]touch enable
<6>[    1.923454] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
<6>[    1.973538] input: touch_dev as /devices/virtual/input/input2
<6>[    1.976010] [Touch] common[1] finger[17] flash[52] button[0]
<6>[    1.977170] [Touch] IC is 7020, H pattern, panel is G2, Firmware: E027.
<6>[    1.978300] usb 1-1: New USB device found, idVendor=05c6, idProduct=9008
<6>[    1.978483] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
<6>[    1.978635] usb 1-1: Product: QHSUSB__BULK
<6>[    1.978727] usb 1-1: Manufacturer: Qualcomm CDMA Technologies MSM
<6>[    1.980009] [Touch] fw_rev[0:0] product_id[PLG137:PLG137] force_upgrade[0]
<6>[    1.980039] [Touch] Touch driver is initialized
<6>[    1.980497] [Touch] DO NOT UPDATE 7020 G2 H pattern FW-upgrade is not executed
<6>[    1.981229] using rtc device, pm8xxx_rtc, for alarms
<6>[    1.981443] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
<6>[    1.982023] i2c /dev entries driver
<6>[    1.982511] qcserial 1-1:1.0: Qualcomm USB modem converter detected
<6>[    1.982908] usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
<6>[    1.984190] usbcore: registered new interface driver uvcvideo
<6>[    1.984312] USB Video Class driver (1.1.1)
<3>[    1.985533] __jrchoi: msm_sensor_init_module: E
<3>[    2.013062] msm_eeprom_probe probe_fail
<6>[    2.013551] msm_server_update_sensor_info mctl_node_name[0] = video1
<3>[    2.041843] msm_eeprom_probe probe_fail
<6>[    2.042270] msm_server_update_sensor_info mctl_node_name[1] = video3
<6>[    2.046268] msm_cam_server_request_irq IRQ Router hw is not present. 
<6>[    2.046940] lm3559_init
<7>[    2.047306] Registered led device: spotlight
<6>[    2.073645] pm8xxx_tm_probe: OK
<6>[    2.074713] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
<6>[    2.075446] cpuidle: using governor ladder
<6>[    2.075660] cpuidle: using governor menu
<6>[    2.076453] mmc0: SDCC Version: 0x0000001a
<6>[    2.078376] mmc0: bam physical base=0x12402000
<6>[    2.078467] mmc0: bam virtual base=0xf00ac000
<6>[    2.078650] sps:BAM 0x12402000 is registered.
<6>[    2.078742] mmc0: BAM device registered. bam_handle=0xef0c7600
<6>[    2.079078] sps:REVISION of BAM 0xf00ac000 is 0x5.
<6>[    2.079627] mmc0: Qualcomm MSM SDCC-BAM at 0x0000000012402000 irq 130
<6>[    2.079749] mmc0: Qualcomm MSM SDCC-DML at 0x0000000012400800
<3>[    2.079963] mmc0: No card detect facilities available
<6>[    2.081764] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma -1 dmacrcri -1
<6>[    2.081916] mmc0: Controller capabilities: 0x0000039e
<6>[    2.082099] mmc0: 8 bit data mode enabled
<6>[    2.082191] mmc0: 4 bit data mode disabled
<6>[    2.082282] mmc0: polling status mode disabled
<6>[    2.082435] mmc0: MMC clock 400000 -> 96000000 Hz, PCLK 0 Hz
<6>[    2.082557] mmc0: Slot eject status = 0
<6>[    2.082649] mmc0: Power save feature enable = 1
<6>[    2.082801] mmc0: SPS-BAM data transfer mode available
<6>[    2.083778] usbcore: registered new interface driver usbhid
<6>[    2.083961] usbhid: USB HID core driver
<6>[    2.084785] ashmem: initialized
<6>[    2.084999] logger: created 256K log 'log_main'
<6>[    2.085273] logger: created 256K log 'log_events'
<6>[    2.085457] logger: created 256K log 'log_radio'
<6>[    2.085731] logger: created 256K log 'log_system'
<6>[    2.087532] coresight-tpiu coresight-tpiu.0: TPIU initialized
<6>[    2.088264] coresight-etb coresight-etb.0: ETB initialized
<6>[    2.088783] coresight-funnel coresight-funnel.0: FUNNEL initialized
<6>[    2.090798] coresight-etm coresight-etm.0: ETM initialized
<6>[    2.091896] coresight-etm coresight-etm.1: ETM initialized
<6>[    2.093056] coresight-etm coresight-etm.2: ETM initialized
<6>[    2.094460] coresight-etm coresight-etm.3: ETM initialized
<6>[    2.095162] usbcore: registered new interface driver snd-usb-audio
<3>[    2.096719] tabla_probe
<6>[    2.097573] amp_enable: amp enable bypass(2)
<6>[    2.097756] amp_enable: AMP_EN is set to 0
<6>[    2.098855] msm_pcm_probe: dev name msm-voip-dsp
<6>[    2.099252] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback sdline 0 capture sdline 8
<6>[    2.099435] msm-dai-q6-mi2s msm-dai-q6-mi2s: msm_dai_q6_mi2s_platform_data_validation: playback ch_max 0 capture ch_mx 8
<6>[    2.100717] msm_pcm_probe: dev name msm-pcm-dsp
<6>[    2.101205] msm_pcm_probe: dev name msm-multi-ch-pcm-dsp
<6>[    2.101632] msm_pcm_probe: dev name msm-lowlatency-pcm-dsp
<6>[    2.102792] msm_compr_probe: dev name msm-compr-dsp
<6>[    2.103708] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
<3>[    2.104929] msm8930_audio_init: Not the right machine type
<3>[    2.105020] msm_audio_init: Not the right machine type
<6>[    2.221730] mmc0: new HS200 MMC card at address 0001
<6>[    2.223134] mmcblk0: mmc0:0001 016G92 14.6 GiB 
<4>[    2.229238] Alternate GPT is invalid, using primary GPT.
<6>[    2.229696]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
<6>[    2.230154] asoc: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
<6>[    2.231313] asoc: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
<6>[    2.232565] asoc: snd-soc-dummy-dai <-> CS-VOICE mapping ok
<6>[    2.233786] asoc: snd-soc-dummy-dai <-> VoIP mapping ok
<6>[    2.234976] asoc: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
<6>[    2.236136] asoc: snd-soc-dummy-dai <-> SLIMBUS0_HOSTLESS mapping ok
<6>[    2.237356] asoc: snd-soc-dummy-dai <-> INT_FM_HOSTLESS mapping ok
<6>[    2.238486] asoc: msm-stub-rx <-> msm-dai-q6.241 mapping ok
<6>[    2.239188] asoc: msm-stub-tx <-> msm-dai-q6.240 mapping ok
<6>[    2.240195] asoc: snd-soc-dummy-dai <-> MultiMedia4 mapping ok
<6>[    2.241110] asoc: snd-soc-dummy-dai <-> AUXPCM_HOSTLESS mapping ok
<6>[    2.242057] asoc: snd-soc-dummy-dai <-> HDMI_HOSTLESS mapping ok
<6>[    2.242972] asoc: snd-soc-dummy-dai <-> VOICE_STUB mapping ok
<6>[    2.244040] asoc: snd-soc-dummy-dai <-> VoLTE mapping ok
<6>[    2.244987] asoc: snd-soc-dummy-dai <-> MultiMedia5 mapping ok
<6>[    2.246604] asoc: tabla_rx1 <-> msm-dai-q6.16384 mapping ok
<6>[    2.251121] asoc: tabla_tx1 <-> msm-dai-q6.16385 mapping ok
<6>[    2.252037] asoc: msm-stub-rx <-> msm-dai-q6.12288 mapping ok
<6>[    2.252830] asoc: msm-stub-tx <-> msm-dai-q6.12289 mapping ok
<6>[    2.253807] asoc: msm-stub-rx <-> msm-dai-q6.12292 mapping ok
<6>[    2.254631] asoc: msm-stub-tx <-> msm-dai-q6.12293 mapping ok
<6>[    2.255516] asoc: msm-stub-rx <-> msm-dai-q6-hdmi.8 mapping ok
<6>[    2.256310] asoc: msm-stub-rx <-> msm-dai-q6.224 mapping ok
<6>[    2.257195] asoc: msm-stub-tx <-> msm-dai-q6.225 mapping ok
<6>[    2.258019] asoc: msm-stub-rx <-> msm-dai-q6.2 mapping ok
<6>[    2.258904] asoc: msm-stub-tx <-> msm-dai-q6.3 mapping ok
<6>[    2.259728] asoc: tabla_rx2 <-> msm-dai-stub mapping ok
<6>[    2.260613] asoc: tabla_tx1 <-> msm-dai-stub mapping ok
<6>[    2.261437] asoc: msm-stub-rx <-> msm-dai-q6.16386 mapping ok
<6>[    2.262231] asoc: msm-stub-tx <-> msm-dai-q6.16387 mapping ok
<6>[    2.263085] asoc: tabla_tx2 <-> msm-dai-q6.16389 mapping ok
<6>[    2.264001] asoc: tabla_rx3 <-> msm-dai-q6.16388 mapping ok
<6>[    2.264764] asoc: msm-stub-rx <-> msm-dai-q6.16392 mapping ok
<6>[    2.265588] asoc: msm-stub-tx <-> msm-dai-q6.16393 mapping ok
<6>[    2.266381] asoc: tabla_tx3 <-> msm-dai-stub mapping ok
<6>[    2.267175] asoc: msm-stub-rx <-> msm-dai-q6.16390 mapping ok
<6>[    2.268060] asoc: msm-stub-tx <-> msm-dai-q6.16391 mapping ok
<6>[    2.270868] input: apq8064-tabla-snd-card Button Jack as /devices/platform/soc-audio.0/sound/card0/input3
<6>[    2.271356] input: apq8064-tabla-snd-card Headset Jack as /devices/platform/soc-audio.0/sound/card0/input4
<6>[    2.276148] oprofile: using arm/armv7-krait
<6>[    2.276484] u32 classifier
<6>[    2.276575]     Actions configured
<6>[    2.276667] Netfilter messages via NETLINK v0.30.
<6>[    2.276911] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[    2.277796] ctnetlink v0.93: registering with nfnetlink.
<6>[    2.278010] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    2.278101] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    2.278528] xt_time: kernel timezone is -0000
<6>[    2.279139] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    2.279536] arp_tables: (C) 2002 David S. Miller
<6>[    2.279719] TCP: cubic registered
<6>[    2.279810] Initializing XFRM netlink socket
<6>[    2.280634] NET: Registered protocol family 10
<6>[    2.283320] Mobile IPv6
<6>[    2.283625] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    2.284053] IPv6 over IPv4 tunneling driver
<6>[    2.284846] NET: Registered protocol family 17
<6>[    2.284968] NET: Registered protocol family 15
<6>[    2.285457] Bluetooth: RFCOMM TTY layer initialized
<6>[    2.285670] Bluetooth: RFCOMM socket layer initialized
<6>[    2.286006] Bluetooth: RFCOMM ver 1.11
<6>[    2.286189] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    2.286372] Bluetooth: BNEP filters: protocol multicast
<6>[    2.286708] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    2.287044] L2TP core driver, V2.0
<6>[    2.287410] PPPoL2TP kernel driver, V2.0
<6>[    2.289394] VFP support v0.3: implementor 51 architecture 64 part 6f variant 0 rev 2
<5>[    2.289943] Registering SWP/SWPB emulation handler
<6>[    2.315153] clock_late_init: Removing enables held for handed-off clocks
<6>[    2.327178] MSM Watchdog Initialized
<6>[    2.336517] registered taskstats version 1
<6>[    2.337036] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2013-02-22 02:47:04 UTC (1361501224)
<3>[    2.337921] read_ocv_trim: program rev reg is 0x4d
<3>[    2.338043] pm8921_is_usb_chg_plugged_in: called before init
<3>[    2.340332] pm8921_is_usb_chg_plugged_in: called before init
<3>[    2.341645] pm8921_is_usb_chg_plugged_in: called before init
<6>[    2.341767] ocv_ir_compensation: comp ocv = 4326403, ocv = 4321848, ibatt_ua = 20800, rbatt_mohm = 219
<6>[    2.341889] read_soc_params_raw: discard shutdown soc! cc_raw = 0x1ed4c
<0>[    2.342072] calculate_unusable_charge_uah: Using shutdown_iavg_ma = 500 in all samples
<3>[    2.342163] pm8921_is_batfet_closed: called before init
<3>[    2.363497] pm8921_is_usb_chg_plugged_in: called before init
<6>[    2.363558] adjust_soc: ibat_ua = 316600, vbat_uv = 4281834, soc = 100, batt_temp=265
<3>[    2.366427] pm8921_get_batt_state: called before init
<6>[    2.366519] pm8921_bms_probe: OK battery_capacity_at_boot=100 volt = 4275708 ocv = 4326403
<3>[    2.367587] power_supply usb: driver failed to report `present' property: 4294967274
<3>[    2.367739] power_supply usb: driver failed to report `present' property: 4294967274
<3>[    2.367862] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
<3>[    2.367953] power_supply pm8921-dc: driver failed to report `present' property: 4294967274
<3>[    2.369235] pm8921_get_batt_state: called before init
<3>[    2.371493] pm8921_get_batt_state: called before init
<6>[    2.377170] wlc: bq51051b_wlc_probe: probe
<6>[    2.377231] wlc: bq51051b_wlc_hw_init: hw_init
<3>[    2.377567] power_supply wireless: driver failed to report `present' property: 4294967274
<6>[    2.377903] batt_temp_ctrl_init 
<6>[    2.378055] batt_temp_ctrl_probe
<6>[    2.378971] android_vibrator: default amplitude 88 
<6>[    2.379063] android vibrator probed
<7>[    2.379276] hsd_init: hsd_init
<7>[    2.379459] hsd_probe: hsd_probe
<7>[    2.379490] hsd_probe: hi->irq_detect = 370
<7>[    2.379642] hsd_probe: hi->irq_key = 371
<6>[    2.380100] input: hs_detect as /devices/virtual/input/input5
<6>[    2.380283] ALSA device list:
<6>[    2.380344]   #0: apq8064-tabla-snd-card
<6>[    2.381321] Freeing init memory: 1036K
<3>[    2.384983] init: could not import file '/init.power.rc' from '/init.rc'
<4>[    2.385167] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[    2.517228] init: cannot open '/initlogo.rle'
<6>[    2.682771] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
<6>[    2.692934] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<6>[    2.783732] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/cache
<6>[    2.833297] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered
<7>[    2.847550] EXT4-fs (mmcblk0p23): ext4_orphan_cleanup: deleting unreferenced inode 603612
<7>[    2.848069] EXT4-fs (mmcblk0p23): ext4_orphan_cleanup: deleting unreferenced inode 603254
<6>[    2.848130] EXT4-fs (mmcblk0p23): 2 orphan inodes deleted
<6>[    2.848252] EXT4-fs (mmcblk0p23): recovery complete
<6>[    2.859880] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<6>[    2.933770] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/msm_sdcc.1/by-name/userdata
<6>[    2.958614] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,noauto_da_alloc
<6>[    2.968350] EXT4-fs (mmcblk0p20): mounted filesystem with ordered data mode. Opts: barrier=1,data=ordered,nodelalloc
<6>[    3.029971] wcnss_wlan triggered by userspace
<6>[    3.053960] msm_otg msm_otg: Avail curr from USB = 500
<6>[    3.054234] msm_otg msm_otg: current: 0 -> 500 (mA)
<6>[    3.054295] pm_power_set_property_usb: usb_target_ma 0
<6>[    3.056798] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
<6>[    3.199603] pil pil1: wcnss: Brought out of reset
<6>[    3.199816] wcnss_8960: Subsystem restart activated for riva.
<6>[    3.213886] unplug_check_worker: Stopping Unplug Check Worker USB == 500mA
<6>[    3.637295] wcnss_wlan_ctrl_probe: SMD ctrl channel up
<3>[    3.719273] pil pil4: gss: Failed to locate gss.mdt
<3>[    3.722508] pil pil4: gss: Failed to locate gss.mdt
<3>[    3.726659] pil pil4: gss: Failed to locate gss.mdt
<3>[    3.732427] pil pil4: gss: Failed to locate gss.mdt
<3>[    3.873309] enable_store: android_usb: already disabled
<3>[    3.873493] enable_store: android_usb: already disabled
<6>[    3.877460] warning: `rild' uses 32-bit capabilities (legacy support in use)
<6>[    3.928002] adb_open
<6>[    3.928063] mtp_bind_config
<6>[    3.928216] adb_bind_config
<6>[    3.950099] msm_thermal: enabled = 0
<6>[    4.095986] mdm_modem_ioctl: Powering on mdm
<6>[    4.129284] android_work: android_work: did not send uevent (0 0   (null))
<6>[    4.144544] pil pil3: dsps: Brought out of reset
<6>[    4.194689] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[    4.198351] android_work: android_work: sent uevent USB_STATE=DISCONNECTED
<6>[    4.277979] android_work: android_work: sent uevent USB_STATE=CONNECTED
<6>[    4.278773] android_usb gadget: high-speed config #1: android_usb
<6>[    4.300442] mdp4_dtv_start: <ID=0 1920x1080 (88,44,148), (4,5,36) 148MHz>
<6>[    4.303708] dtv_on: tv_src_clk=148500kHz, pm_qos_rate=148500kHz, [0]
<6>[    4.304349] hdmi_msm hdmi_msm.1: power: ON (1920x1080 148500000)
<6>[    4.304501] hdmi_msm hdmi_msm.1: power=OFF DVI= OFF
<6>[    4.304562] mdp4_dtv_on:
<3>[    4.304623] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=1
<6>[    4.304745] hdmi_msm hdmi_msm.1: power: OFF (audio off, Reset Core)
<6>[    4.304837] hdmi_msm hdmi_msm.1: HDMI Audio: Disabled
<6>[    4.304929] dtv_off
<6>[    4.307523] mdp4_dtv_off:
<6>[    4.334228] mipi_dsi_controller_cfg: DSI status=8 failed
<6>[    4.334320] android_work: android_work: sent uevent USB_STATE=CONFIGURED
<6>[    4.334442] mipi_dsi_panel_power: mipi lcd function started status = 1 
<4>[    4.334564] ext_dsv_load: Failed to create debugfs directory
<6>[    4.336639]  mipi_dsi_panel_power : reset start.
<6>[    4.359072] mipi_lgit_lcd_on started
<6>[    4.380222] mipi_lgit_lcd_on finished
<6>[    4.645902] hdmi_msm hdmi_msm.1: hdmi_msm_hpd_feature: 1
<6>[    4.963650] pil pil0: q6: Brought out of reset
<6>[    4.994689] apr_tal:Q6 Is Up
<6>[    4.994964] apr_tal: SMD_EVENT_OPEN
<3>[    5.012116] diag: proc 2, msg mask update fail -12, tried 419
<6>[    5.051762] mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 96000000
<6>[    5.054417] mdp4_overlay_mdp_perf_upd mdp bw is changed [1] from 4 to 1
<6>[    5.754188] hdmi_msm hdmi_msm.1: HDMI HPD: event detected
<6>[    5.754249] hdmi_msm hdmi_msm.1: HDMI HPD: QDSP OFF
<6>[    5.754585] hdmi_msm hdmi_msm.1: hdmi_audio state switched to 0: hdmi_msm_hpd_state_work
<6>[    5.754677] hdmi_msm hdmi_msm.1: Hdmi state switched to 0: hdmi_msm_hpd_state_work
<6>[    5.754799] hdmi_msm hdmi_msm.1: HDMI HPD: DISCONNECTED: send OFFLINE
<6>[    7.240164] apr_tal: SMD_EVENT_OPEN
<6>[    8.064214] msm_ta_detect_work: USB exit ta detection - frindex
<6>[   11.204578] mdm_modem_ioctl: normal boot done
<6>[   11.213978] mdm_pblrdy_change: pbl ready:0
<6>[   11.859575] mdm_status_change: status = 1: mdm is now ready
<6>[   11.898061] msm_hsic_host msm_hsic_host: remove, state 1
<6>[   11.898184] usb usb1: USB disconnect, device number 1
<6>[   11.898245] usb 1-1: USB disconnect, device number 2
<6>[   11.899252] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
<6>[   11.899649] qcserial 1-1:1.0: device disconnected
<6>[   11.901602] msm_hsic_host msm_hsic_host: USB bus 1 deregistered
<6>[   11.914909] msm_hsic_host msm_hsic_host: Qualcomm EHCI Host Controller using HSIC
<6>[   11.915000] msm_hsic_host msm_hsic_host: new USB bus registered, assigned bus number 1
<6>[   11.944300] msm_hsic_host msm_hsic_host: irq 261, io mem 0x12510000
<6>[   11.964199] msm_hsic_host msm_hsic_host: USB 2.0 started, EHCI 1.00
<6>[   11.964687] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[   11.964840] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[   11.964901] usb usb1: Product: Qualcomm EHCI Host Controller using HSIC
<6>[   11.965023] usb usb1: Manufacturer: Linux 3.4.0-evervolv-ge64003f-00880-ge82fe1e ehci_hcd
<6>[   11.965115] usb usb1: SerialNumber: msm_hsic_host
<6>[   11.966213] hub 1-0:1.0: USB hub found
<6>[   11.966274] hub 1-0:1.0: 1 port detected
<6>[   12.334228] usb 1-1: new high-speed USB device number 2 using msm_hsic_host
<6>[   12.397253] usb 1-1: New USB device found, idVendor=05c6, idProduct=9048
<6>[   12.397375] usb 1-1: New USB device strings: Mfr=3, Product=2, SerialNumber=0
<6>[   12.397436] usb 1-1: Product: Qualcomm CDMA Technologies MSM
<6>[   12.397527] usb 1-1: Manufacturer: Qualcomm, Incorporated
<6>[   12.407111] qcserial 1-1:1.2: Qualcomm USB modem converter detected
<6>[   12.407660] usb 1-1: Qualcomm USB modem converter now attached to ttyUSB0
<6>[   12.411658] rmnet_usb 1-1:1.5: rmnet_usb0: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 9a:ef:19:5d:aa:7d
<6>[   12.415077] rmnet_usb 1-1:1.6: rmnet_usb1: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 9a:ef:19:5d:aa:7d
<6>[   12.495864] rmnet_usb 1-1:1.7: rmnet_usb2: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 9a:ef:19:5d:aa:7d
<6>[   12.566397] rmnet_usb 1-1:1.8: rmnet_usb3: register 'rmnet_usb' at usb-msm_hsic_host-1, RmNET net device, 9a:ef:19:5d:aa:7d
<6>[   13.107004] request_suspend_state: wakeup (3->0) at 13102814829 (2013-02-22 02:47:15.258734606 UTC)
<4>[   13.490859] lowmem_shrink: convert oom_adj to oom_score_adj:
<4>[   13.490981] oom_adj 0 => oom_score_adj 0
<4>[   13.491042] oom_adj 1 => oom_score_adj 58
<4>[   13.491133] oom_adj 2 => oom_score_adj 117
<4>[   13.491194] oom_adj 4 => oom_score_adj 235
<4>[   13.491255] oom_adj 9 => oom_score_adj 529
<4>[   13.491377] oom_adj 15 => oom_score_adj 1000
<6>[   13.569449] wlan: loading driver v3.2.1.13
<3>[   13.585746] [WLAN][536:E :SME] csrOpen: 326:  country Code from nvRam USI
<3>[   13.585746] 
<3>[   13.591881] [WLAN][536:E :PE ] CheckParam: 788: Param id 40 wrong permissions 237094
<3>[   13.591881] 
<3>[   13.592064] [WLAN][536:E :PE ] ProcSetReqInternal: 689: Check param failed, param 40
<3>[   13.592064] 
<3>[   13.592339] [0:536:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.595299] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.596001] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.597802] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.598473] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.600183] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.600824] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.601373] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.603021] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.603754] [0:722:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.606409] [0:536:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<6>[   13.612055] EXT4-fs (dm-0): mounted filesystem without journal. Opts: (null)
<6>[   13.644193] wcnss_post_bootup: Cancel APPS vote for Iris & Riva
<6>[   13.727422] EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>[   13.732244] EXT4-fs (dm-0): re-mounted. Opts: (null)
<6>[   13.764810] wlan: WCNSS WLAN version 1.3.1.0
<6>[   13.764871] wlan: WCNSS software version AAAAAANAAW122025
<6>[   13.764932] wlan: WCNSS hardware version WCN v2.0 IRIS v2.0 with 48MHz XO
<3>[   13.765054] [0:536:E :CTL] Caps exchange feature NOT supported. Return NOT SUPPORTED for 2 feature
<3>[   13.781992] [WLAN][536:E :HDD] In module init: Ensure Force XO Core is OFF when  WLAN is turned ON so Core toggles unless we enter PS
<3>[   13.781992] 
<6>[   13.782176] wlan: driver loaded
<3>[   13.824355] [WLAN][752:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
<3>[   13.824355] 
<6>[   13.825026] ADDRCONF(NETDEV_UP): p2p0: link is not ready
<3>[   13.999175] [WLAN][752:E :SME] PMC: STA not associated with an AP with single active session. BMPS cannot be entered
<3>[   13.999175] 
<6>[   13.999816] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<6>[   14.288295] acc_open
<6>[   14.288386] acc_release
<3>[   14.635159] [WLAN][722:E :PE ] limProcessAssocRspFrame: 705: Successfully Associated with BSS 00:24:a5:af:f2:54
<6>[   14.653288] wlan: connected to 00:24:a5:af:f2:54
<6>[   14.654021] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<3>[   14.654967] [WLAN][723:E :TL ] WLAN TL:RX Frame  EAPOL EtherType 34958 - processing
<3>[   14.657225] [WLAN][0:E :TL ] WLAN TL:Packet pending indication for STA: 3 AC: 3 State: 1
<3>[   14.657469] [WLAN][723:E :TL ] WLAN TL: WLANTL_STATxConn no more packets in HDD for AC: 3 AC Mask: 0
<3>[   14.661040] [WLAN][724:E :TL ] WLAN TL:RX Frame  EAPOL EtherType 34958 - processing
<3>[   14.661315] [WLAN][0:E :TL ] WLAN TL:Packet pending indication for STA: 3 AC: 3 State: 1
<3>[   14.661620] [WLAN][723:E :TL ] WLAN TL: WLANTL_STATxConn no more packets in HDD for AC: 3 AC Mask: 0
<6>[   15.144422] mtp_open
<6>[   15.928765] bcm2079x-i2c 0-a1fa: 10,29
<3>[   16.232504] msm_ipc_router_create: Do not have permissions
<6>[   16.239066] bcm2079x-i2c 0-a1fa: bcm2079x_dev_unlocked_ioctl, BCMNFC_CHANGE_ADDR (fa02, 77):
<6>[   16.239188] bcm2079x-i2c 0-a1fa: Change client device from (0x0079) flag = 0000, addr_data[9] = 69
<6>[   16.239920] bcm2079x-i2c 0-a1fa: Change client device changed to (0x0077) flag = 0000, ret = 10
<3>[   16.336120] msm_ipc_router_create: Do not have permissions
<3>[   16.410041] msm_ipc_router_create: Do not have permissions
<3>[   16.417884] msm_ipc_router_create: Do not have permissions
<6>[   20.714756] binder: 564:712 transaction failed 29189, size 100-4
<6>[   23.075080] adjust_soc: ibat_ua = 77900, vbat_uv = 4318884, soc = 100, batt_temp=270
<6>[   23.721715] binder: 564:712 transaction failed 29189, size 100-4
<7>[   25.584892] wlan0: no IPv6 routers present
<6>[   29.086311] eoc_worker: End of Charging
<6>[   29.098245] adjust_soc: ibat_ua = -106800, vbat_uv = 4325058, soc = 100, batt_temp=271
<6>[   33.772318] binder: 564:712 transaction failed 29189, size 100-4