Last active
December 19, 2017 03:47
-
-
Save drolfe/488647f06982b70bbcd8 to your computer and use it in GitHub Desktop.
FirstBoot Script
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| #Values set by foreman finish scritp.. | |
| H_NAME= | |
| OS_NAME= | |
| OS_MAJOR= | |
| OS_MINOR= | |
| IPV4= | |
| NMASK= | |
| GWAY= | |
| RAIDSET= | |
| #dist=`lsb_release -s -d | sed 's|[()]| |g' | awk '{ print $4 }'` | |
| #dist_ver=`lsb_release -s -d | sed 's|[()]| |g' | awk '{ print $3 }'` | |
| if [ ${OS_NAME} = "Ubuntu" ] | |
| then | |
| cat << EOF1 >/etc/network/interfaces | |
| auto lo | |
| iface lo inet loopback | |
| auto eth0 | |
| iface eth0 inet manual | |
| bond-master bond0 | |
| auto eth1 | |
| iface eth1 inet manual | |
| bond-master bond0 | |
| auto bond0 | |
| iface bond0 inet static | |
| address ${IPV4} | |
| netmask ${NMASK} | |
| gateway ${GWAY} | |
| bond-mode 6 | |
| bond-miimon 100 | |
| bond_downdelay 200 | |
| bond_updelay 200 | |
| bond-slaves eth0 eth1 | |
| dns-nameservers 8.8.8.8 8.8.4.4 | |
| EOF1 | |
| cat << EOF2 >>/etc/modules | |
| bonding | |
| EOF2 | |
| cat << EOF3 >/etc/apt/sources.list.d/mcp.list | |
| deb http://downloads.linux.hp.com/SDR/repo/mcp precise/current non-free | |
| EOF3 | |
| update-rc.d firstboot disable | |
| else | |
| cat << EOF1 >/etc/network/interfaces | |
| auto lo | |
| iface lo inet loopback | |
| auto bond0 | |
| iface bond0 inet static | |
| address ${IPV4} | |
| netmask ${NMASK} | |
| gateway ${GWAY} | |
| bond-mode 6 | |
| bond-miimon 100 | |
| bond_downdelay 200 | |
| bond_updelay 200 | |
| bond-slaves eth0 eth1 | |
| dns-nameserver 8.8.8.8 8.8.4.4 | |
| EOF1 | |
| cat << EOF2 >/etc/apt/sources.list.d/mcp.list | |
| deb http://downloads.linux.hp.com/SDR/repo/mcp wheezy/current non-free | |
| EOF2 | |
| update-rc.d firstboot disable | |
| fi | |
| #gpg --keyserver subkeys.pgp.net --recv-keys 2689B887 && gpg --export -a 2689B887 | apt-key add - | |
| wget -O- http://downloads.linux.hp.com/SDR/repo/mcp/GPG-KEY-mcp | apt-key add - | |
| apt-get update && apt-get -y install hpacucli hponcfg | |
| reboot | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| # chkconfig: 345 99 01 | |
| # description: firstboot script | |
| #ipv4=`grep -i ipaddr /etc/sysconfig/network-scripts/ifcfg-eth0 | awk -F'"' '{print $2}'` | |
| #mask=`grep -i netmask /etc/sysconfig/network-scripts/ifcfg-eth0 | awk -F'"' '{print $2}'` | |
| #gateway=`grep -i gateway /etc/sysconfig/network-scripts/ifcfg-eth0 | awk -F'"' '{print $2}'` | |
| #hname=`hostname` | |
| dist=`cat /etc/redhat-release | awk '{ print $1 }'` | |
| dist_ver=`cat /etc/redhat-release | awk '{ print $3 }'` | |
| raidset=0 | |
| #Values set by foreman finish scritp.. | |
| H_NAME= | |
| OS_NAME= | |
| OS_MAJOR= | |
| OS_MINOR= | |
| IPV4= | |
| NMASK= | |
| GWAY= | |
| #RAIDSET= | |
| cat << EOF1 >/etc/sysconfig/network-scripts/ifcfg-bond0 | |
| DEVICE=bond0 | |
| USERCTL=no | |
| BOOTPROTO=none | |
| ONBOOT=yes | |
| IPADDR="${IPV4}" | |
| NETMASK="${NMASK}" | |
| GATEWAY="${GWAY}" | |
| HOSTNAME="${H_NAME}" | |
| BONDING_OPTS="miimon=100 mode=balance-alb" | |
| TYPE=Unknown | |
| IPV6INIT=no | |
| MTU="1500" | |
| DNS1="8.8.8.8" | |
| DNS2="8.8.4.4" | |
| EOF1 | |
| cat << EOF2 >/etc/sysconfig/network-scripts/ifcfg-eth0 | |
| DEVICE=eth0 | |
| BOOTPROTO=none | |
| ONBOOT=yes | |
| MASTER=bond0 | |
| SLAVE=yes | |
| USERCTL=no | |
| EOF2 | |
| cat << EOF3 >/etc/sysconfig/network-scripts/ifcfg-eth1 | |
| DEVICE=eth1 | |
| BOOTPROTO=none | |
| ONBOOT=yes | |
| MASTER=bond0 | |
| SLAVE=yes | |
| USERCTL=no | |
| EOF3 | |
| echo 'alias bond0 bonding' >> /etc/modprobe.d/bonding.conf | |
| service network stop | |
| sleep 3 | |
| service network start | |
| cat << EOF4 >/etc/yum.repos.d/mcp.repo | |
| [mcp] | |
| name=Management Component Pack | |
| baseurl=http://downloads.linux.hp.com/repo/mcp/CentOS/6.5/x86_64/current/ | |
| enabled=1 | |
| gpgcheck=0 | |
| gpgkey=file:///etc/pki/rpm-gpg/GPG-KEY-mcp | |
| EOF4 | |
| yum -t -y -e 0 update | |
| yum -t -y -e 0 install hpacucli hponcfg | |
| /sbin/chkconfig --level 345 firstboot off | |
| FindDisk=`hpacucli ctrl slot=1 pd all show | grep -i physical | awk '{print $2}'` | |
| FindLv=`hpacucli ctrl slot=1 ld all show | grep logicaldrive | awk '{print $2}'` | |
| Drives=() | |
| for i in ${FindDisk} | |
| do | |
| Drives+=($i) | |
| done | |
| DiskNum=${#Drives[@]} | |
| if [ ! -z ${FindLv} ] | |
| then | |
| hpacucli ctrl slot=1 ld all delete forced | |
| fi | |
| if [ ${#Drives[@]} -eq 1 ] | |
| then | |
| hpacucli ctrl slot=1 create type=ld drives=${Drives[0]} raid=0 | |
| elif [ ${raidset} -eq 0 ] | |
| then | |
| hpacucli ctrl slot=1 create type=ld drives=all raid=0 | |
| elif [ ${raidset} -eq 1 ] | |
| then | |
| hpacucli ctrl slot=1 create type=ld drives=all raid=1 | |
| else | |
| for i in ${Drives[@]} | |
| do | |
| hpacucli ctrl slot=1 create type=ld drives=$i raid=0 | |
| done | |
| fi | |
| Lvols=`fdisk -l | grep cciss | sed 's|[/:]| |g' | awk '{ print $4 }'` | |
| num=1 | |
| for i in ${Lvols} | |
| do | |
| pvcreate /dev/cciss/$i | |
| vgcreate disk${num}_vg /dev/cciss/$i | |
| lvcreate -l 100%FREE -n disk${num}_lv disk${num}_vg | |
| mkfs -t ext4 /dev/disk${num}_vg/disk${num}_lv | |
| cat << EOF5 >>/etc/fstab | |
| /dev/disk${num}_vg/disk${num}_lv /disk${num} ext4 defaults 0 1 | |
| EOF5 | |
| mkdir /disk${num} | |
| ((num++)) | |
| done | |
| mount -a |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| # Tested on Centos 6.5 and Centos 6.6 | |
| cat << EOF4 >/etc/yum.repos.d/mcp.repo | |
| [mcp] | |
| name=Management Component Pack | |
| baseurl=http://downloads.linux.hp.com/repo/mcp/CentOS/6.5/x86_64/current/ | |
| enabled=1 | |
| gpgcheck=0 | |
| gpgkey=file:///etc/pki/rpm-gpg/GPG-KEY-mcp | |
| EOF4 | |
| yum -t -y -e 0 update | |
| yum -t -y -e 0 install hp-health-* hpacucli-* hponcfg-* hpsmh-* hp-snmp-agents-* hp-smh-templates-* cpqacuxe-* hpdiags-* | |
| cat << EOF1 >/etc/snmp/snmpd.conf | |
| # First, map the community name "public" into a "security name" | |
| # sec.name source community | |
| com2sec localRO 127.0.0.1 public | |
| com2sec localRW 127.0.0.1 private | |
| com2sec hpsim_ro x.x.x.x public | |
| #### | |
| # Second, map the security name into a group name: | |
| # groupName securityModel securityName | |
| group group_localRO v1 localRO | |
| group group_localRO v2c localRO | |
| group group_localRW v1 localRW | |
| group group_localRW v2c localRW | |
| group group_hpsimro v1 hpsim_ro | |
| #### | |
| # Third, create a view for us to let the group have rights to: | |
| # Make at least snmpwalk -v 1 localhost -c public system fast again. | |
| # name incl/excl subtree mask(optional) | |
| view all included .1 | |
| #### | |
| # Finally, grant the group read-only access to the systemview view. | |
| # group context sec.model sec.level prefix read write notif | |
| access group_localRO "" any noauth exact all none none | |
| access group_localRW "" any noauth exact all all none | |
| access group_hpsimro "" any noauth exact all none none | |
| ## Extra's | |
| dlmod cmaX /usr/lib64/libcmaX64.so | |
| dontLogTCPWrappersConnects 1 | |
| trapcommunity public | |
| trapsink x.x.x.x public | |
| syscontact someone@localhost | |
| syslocation DATACENTER | |
| EOF1 | |
| service hp-asrd restart | |
| service hp-health restart | |
| service snmpd restart | |
| service hp-snmp-agents restart |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| %post | |
| logger "Starting anaconda <%= @host %> postinstall" | |
| exec < /dev/tty3 > /dev/tty3 | |
| #changing to VT 3 so that we can see whats going on.... | |
| /usr/bin/chvt 3 | |
| ( | |
| echo "Grab Firstboot script" | |
| sleep 5 | |
| wget -q -O- https://gist.githubusercontent.com/drolfe/488647f06982b70bbcd8/raw/firstboot-script | sed 's/raidset=0/raidset=<%= @host.params['RAID'] %>/' > /etc/init.d/firstboot | |
| chmod +x /etc/init.d/firstboot | |
| sync | |
| ) 2>&1 | tee /root/install.post.log | |
| exit 0 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| FindDisk=`hpacucli ctrl slot=1 pd all show | grep -i physical | awk '{print $2}'` | |
| FindLv=`hpacucli ctrl slot=1 ld all show | grep logicaldrive | awk '{print $2}'` | |
| Drives=() | |
| for i in ${FindDisk} | |
| do | |
| Drives+=($i) | |
| done | |
| DiskNum=${#Drives[@]} | |
| if [ ! -z ${FindLv} ] | |
| then | |
| hpacucli ctrl slot=1 ld all delete forced | |
| fi | |
| if [ ${#Drives[@]} -eq 1 ] | |
| then | |
| hpacucli ctrl slot=1 create type=ld drives=${Drives[0]} raid=0 | |
| elif [ ${RAID} -eq 0 ] | |
| then | |
| hpacucli ctrl slot=1 create type=ld drives=all raid=0 | |
| elif [ ${RAID} -eq 1 ] | |
| then | |
| hpacucli ctrl slot=1 create type=ld drives=all raid=1 | |
| else | |
| for i in ${Drives[@]} | |
| do | |
| hpacucli ctrl slot=1 create type=ld drives=$i raid=0 | |
| done | |
| fi | |
| Lvols=`fdisk -l | grep cciss | sed 's|[/:]| |g' | awk '{ print $4 }'` | |
| num=1 | |
| for i in ${Lvols} | |
| do | |
| pvcreate /dev/cciss/$i | |
| vgcreate disk${num}_vg /dev/cciss/$i | |
| lvcreate -l 100%FREE -n disk${num}_lv disk${num}_vg | |
| mkfs -t ext4 /dev/disk${num}_vg/disk${num}_lv | |
| cat << EOF5 >>/etc/fstab | |
| /dev/disk${num}_vg/disk${num}_lv /disk${num} ext4 defaults 0 1 | |
| EOF5 | |
| mkdir /disk${num} | |
| ((num++)) | |
| done | |
| mount -a |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment