netbsd-thinkpadedge-dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007, 2008, 2009, 2010, 2011, 2012
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 6.1.3 (GENERIC)
total memory = 3838 MB
avail memory = 3711 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
LENOVO 2545A26 (ThinkPad Edge)
mainbus0 (root)
cpu0 at mainbus0 apid 0: AMD Athlon(tm) II Neo K345 Dual-Core Processor, id 0x100f63
cpu1 at mainbus0 apid 1: AMD Athlon(tm) II Neo K345 Dual-Core Processor, id 0x100f63
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 21, 24 pins
acpi0 at mainbus0: Intel ACPICA 20110623
acpi0: X/RSDT: OemId <LENOVO,TP-87   ,00001180>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
hpet0 at acpi0: high precision event timer (mem 0xfed00000-0xfed00400)
timecounter: Timecounter "hpet0" frequency 14318180 Hz quality 2000
acpiec0 at acpi0 (EC, PNP0C09-1): io 0x62,0x66
acpiwmi0 at acpi0 (WMI2, PNP0C14-0): ACPI WMI Interface
acpiwmibus at acpiwmi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEMR (PNP0C02) at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800): io 0x61
midi0 at pcppi1: PC speaker
sysbeep0 at pcppi1
attimer1 at acpi0 (TIME, PNP0100): io 0x40-0x43 irq 0
pckbc1 at acpi0 (KBC0, PNP0303) (kbd port): io 0x60,0x64 irq 1
pckbc2 at acpi0 (MSE0, LEN0017) (aux port): irq 12
SYSR (PNP0C02) at acpi0 not configured
MEM (PNP0C01) at acpi0 not configured
thinkpad0 at acpi0 (HKEY, IBM0068)
acpivga0 at acpi0 (VGA): ACPI Display Adapter
acpiout0 at acpivga0 (LCD, 0x0110): ACPI Display Output Device
acpiout0: brightness levels: 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 100
acpiout1 at acpivga0 (CRT, 0x0100): ACPI Display Output Device
acpivga0: connected output devices:
acpivga0:   0x0100 (acpiout1): Ext. Monitor, head 0, bios detect
acpivga0:   0x0110 (acpiout0): LCD Panel, head 0, bios detect
acpivga0:   0x0200: TV, head 0
acpivga0:   0x0210: Unknown Output Device, head 0, bios detect
acpivga0:   0x0220: Unknown Output Device, head 0, bios detect
acpiacad0 at acpi0 (ACAD, ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (BAT1, PNP0C0A-1): ACPI Battery
acpibat0: SANYO LION rechargeable battery
acpibat0: granularity: low->warn 0.001 Wh, warn->full 0.001 Wh
acpilid0 at acpi0 (LID, PNP0C0D): ACPI Lid Switch
acpitz0 at acpi0 (TZ00): cpu0
acpitz0: levels: critical 105.0 C, passive 96.0 C, passive cooling
attimer1: attached to pcppi1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pmsattach: disable error
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0: vendor 0x1022 product 0x9601 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: vendor 0x1022 product 0x9602 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 5 function 0: vendor 0x1002 product 0x9712 (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
radeondrm0 at vga0: ATI Radeon Mobility HD 4200
radeondrm0: Initialized radeon 1.29.0 20080613
hdaudio0 at pci1 dev 5 function 1: HD Audio Controller
hdaudio0: interrupting at ioapic0 pin 19
hdafg0 at hdaudio0: ATI RS690/780 HDMI
hdafg0: HDMI00 2ch: Digital Out [Jack]
hdafg0: 2ch/0ch 44100Hz 48000Hz PCM16 AC3
ppb1 at pci0 dev 4 function 0: vendor 0x1022 product 0x9604 (rev. 0x00)
ppb1: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
re0 at pci2 dev 0 function 0: RealTek 8168/8111 PCIe Gigabit Ethernet (rev. 0x03)
re0: interrupting at ioapic0 pin 16
re0: Ethernet address e8:9a:8f:33:0d:b3
re0: using 256 tx descriptors
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 1000BASE-T media interface, rev. 2
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb2 at pci0 dev 5 function 0: vendor 0x1022 product 0x9605 (rev. 0x00)
ppb2: PCI Express 2.0 <Root Port of PCI-E Root Complex>
pci3 at ppb2 bus 8
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x10ec product 0x8176 (miscellaneous network, revision 0x01) at pci3 dev 0 function 0 not configured
ahcisata0 at pci0 dev 17 function 0: vendor 0x1002 product 0x4391 (rev. 0x00)
ahcisata0: interrupting at ioapic0 pin 19
ahcisata0: 64-bit DMA
ahcisata0: AHCI revision 1.20, 2 ports, 32 slots, CAP 0xf722ff21<SXS,PSC,SSC,PMD,SPM,ISS=0x2=Gen2,SCLO,SAL,SALP,SMPS,SSNTF,SNCQ,S64A>
atabus0 at ahcisata0 channel 0
atabus1 at ahcisata0 channel 1
ohci0 at pci0 dev 18 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci0: interrupting at ioapic0 pin 18
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
ehci0 at pci0 dev 18 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci0: interrupting at ioapic0 pin 17
ehci0: dropped intr workaround enabled
ehci0: EHCI version 1.0
ehci0: companion controller, 5 ports each: ohci0
usb1 at ehci0: USB revision 2.0
ohci1 at pci0 dev 19 function 0: vendor 0x1002 product 0x4397 (rev. 0x00)
ohci1: interrupting at ioapic0 pin 18
ohci1: OHCI version 1.0, legacy support
usb2 at ohci1: USB revision 1.0
ehci1 at pci0 dev 19 function 2: vendor 0x1002 product 0x4396 (rev. 0x00)
ehci1: interrupting at ioapic0 pin 17
ehci1: dropped intr workaround enabled
ehci1: EHCI version 1.0
ehci1: companion controller, 5 ports each: ohci1
usb3 at ehci1: USB revision 2.0
piixpm0 at pci0 dev 20 function 0: vendor 0x1002 product 0x4385 (rev. 0x42)
piixpm0: polling (SB800)
iic0 at piixpm0: I2C bus
hdaudio1 at pci0 dev 20 function 2: HD Audio Controller
hdaudio1: interrupting at ioapic0 pin 16
hdafg1 at hdaudio1: Conexant CX20582
hdafg1: DAC00 2ch: HP Out [Jack]
hdafg1: ADC01 2ch: Mic In [Jack]
hdafg1: DAC02 2ch: Speaker [Built-In]
hdafg1: ADC03 2ch: Mic In [Built-In]
hdafg1: 2ch/2ch 44100Hz 48000Hz 96000Hz PCM16 PCM20 PCM24 AC3
audio0 at hdafg1: full duplex, playback, capture, independent
pcib0 at pci0 dev 20 function 3: vendor 0x1002 product 0x439d (rev. 0x40)
ppb3 at pci0 dev 20 function 4: vendor 0x1002 product 0x4384 (rev. 0x40)
pci4 at ppb3 bus 9
pci4: i/o space, memory space enabled
pchb1 at pci0 dev 24 function 0: vendor 0x1022 product 0x1200 (rev. 0x00)
pchb2 at pci0 dev 24 function 1: vendor 0x1022 product 0x1201 (rev. 0x00)
pchb3 at pci0 dev 24 function 2: vendor 0x1022 product 0x1202 (rev. 0x00)
pchb4 at pci0 dev 24 function 3: vendor 0x1022 product 0x1203 (rev. 0x00)
amdtemp0 at pchb4: AMD CPU Temperature Sensors (Family10h)
pchb5 at pci0 dev 24 function 4: vendor 0x1022 product 0x1204 (rev. 0x00)
isa0 at pcib0
acpicpu0 at cpu0: ACPI CPU
acpicpu0: C1: HLT, lat   0 us, pow     0 mW
acpicpu0: P0: FFH, lat   4 us, pow  4716 mW, 1400 MHz
acpicpu0: P1: FFH, lat   4 us, pow  3977 mW, 1200 MHz
acpicpu0: P2: FFH, lat   4 us, pow  2635 mW,  800 MHz
acpicpu1 at cpu1: ACPI CPU
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
timecounter: Timecounter "TSC" frequency 1397099200 Hz quality 3000
acpiacad0: AC adapter offline.
uhub0 at usb0: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 5 ports with 5 removable, self powered
uhub1 at usb1: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 5 ports with 5 removable, self powered
uhub2 at usb2: vendor 0x1002 OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 5 ports with 5 removable, self powered
uhub3 at usb3: vendor 0x1002 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 5 ports with 5 removable, self powered
ahcisata0 port 0: device present, speed: 3.0Gb/s
wd0 at atabus0 drive 0
wd0: <KINGSTON SV300S37A60G>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57241 MB, 116301 cyl, 16 head, 63 sec, 512 bytes/sect x 117231408 sectors
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(ahcisata0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) (using DMA)
umass0 at uhub3 port 2 configuration 1 interface 0
umass0: Generic USB2.0-CRW, rev 2.00/58.88, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, 1 lun per target
sd0 at scsibus0 target 0 lun 0: <Generic-, Multi-Card, 1.00> disk removable
sd0: drive offline
sd0: unable to open device, error = 19
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: Hewlett-Packard Company HP USB Smart Card Keyboard, rev 2.00/5.35, addr 2, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uvideo0 at uhub3 port 3 configuration 1 interface 0: Image Processor Integrated Camera, rev 2.00/30.08, addr 3
video0 at uvideo0: Image Processor Integrated Camera, rev 2.00/30.08, addr 3
Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex, playback, capture
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cprng sysctl: WARNING pseudorandom rekeying.
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
acpibat0: normal capacity on 'charge state'