Created
March 15, 2016 18:40
-
-
Save dsundarraj/f8477ba553d323a9b3ab to your computer and use it in GitHub Desktop.
SNAT in Opencontrail
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Workflow: | |
- Assuming that you have a public network already setup | |
- Enable that network to be External | |
- neutron net-update public —router:external=True | |
- Create a test network | |
- neutron net-create test | |
- neutron subnet-create —name test-subnet test 4.4.4.0/24 | |
- Create a neutron router | |
- neutron router-create r1 | |
- neutron router-interface-add r1 test-subnet | |
- Set the external GW for the router | |
- neutron router-gateway-set r1 public | |
Verification: | |
root@oblocknode04:~# ip link | |
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default | |
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 | |
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 | |
link/ether 04:7d:7b:b2:8f:80 brd ff:ff:ff:ff:ff:ff | |
3: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 | |
link/ether 08:9e:01:d9:28:26 brd ff:ff:ff:ff:ff:ff | |
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 | |
link/ether 04:7d:7b:b2:8f:81 brd ff:ff:ff:ff:ff:ff | |
5: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP mode DEFAULT group default qlen 1000 | |
link/ether 08:9e:01:d9:28:26 brd ff:ff:ff:ff:ff:ff | |
6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default | |
link/ether 08:9e:01:d9:28:26 brd ff:ff:ff:ff:ff:ff | |
7: pkt1: <UP,LOWER_UP> mtu 65535 qdisc noqueue state UNKNOWN mode DEFAULT group default | |
link/void 36:66:cb:92:8f:47 brd 00:00:00:00:00:00 | |
8: pkt3: <UP,LOWER_UP> mtu 65535 qdisc noqueue state UNKNOWN mode DEFAULT group default | |
link/void 7a:db:24:6c:33:2f brd 00:00:00:00:00:00 | |
9: pkt2: <UP,LOWER_UP> mtu 65535 qdisc noqueue state UNKNOWN mode DEFAULT group default | |
link/void 4e:1e:58:ff:82:40 brd 00:00:00:00:00:00 | |
10: vhost0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 1000 | |
link/ether 08:9e:01:d9:28:26 brd ff:ff:ff:ff:ff:ff | |
11: pkt0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN mode DEFAULT group default qlen 500 | |
link/ether d2:a5:ef:aa:d9:9f brd ff:ff:ff:ff:ff:ff | |
12: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default | |
link/ether 86:5b:be:ca:22:f5 brd ff:ff:ff:ff:ff:ff | |
14: tapa5fbf358-90: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 500 | |
link/ether 36:49:f3:26:5b:f8 brd ff:ff:ff:ff:ff:ff | |
15: veth62ec53ff-1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 | |
link/ether 86:0a:af:28:29:5e brd ff:ff:ff:ff:ff:ff | |
16: vethc9da7b40-2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 | |
link/ether 86:28:fc:43:c1:ca brd ff:ff:ff:ff:ff:ff | |
********************************************* | |
root@oblocknode04:~# ip netns exec vrouter-884857f0-a961-4229-8653-8cb4ac56b965 iptables -t nat -L | |
Chain PREROUTING (policy ACCEPT) | |
target prot opt source destination | |
Chain INPUT (policy ACCEPT) | |
target prot opt source destination | |
Chain OUTPUT (policy ACCEPT) | |
target prot opt source destination | |
Chain POSTROUTING (policy ACCEPT) | |
target prot opt source destination | |
MASQUERADE all -- anywhere anywhere | |
all -- anywhere anywhere | |
all -- anywhere anywhere | |
MASQUERADE all -- anywhere anywhere | |
********************************************* | |
root@oblocknode04:~# ip netns exec vrouter-884857f0-a961-4229-8653-8cb4ac56b965 ip link list | |
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default | |
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 | |
2: int-62ec53ff-1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 | |
link/ether 02:b3:95:f7:b7:cd brd ff:ff:ff:ff:ff:ff | |
3: gw-c9da7b40-22: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000 | |
link/ether 02:d4:4c:fa:49:cf brd ff:ff:ff:ff:ff:ff | |
root@oblocknode04:~# | |
root@oblocknode04:~# | |
************************************************** | |
root@oblocknode04:~# ip netns exec vrouter-884857f0-a961-4229-8653-8cb4ac56b965 ip route | |
default dev gw-c9da7b40-22 scope link | |
10.87.25.0/25 dev gw-c9da7b40-22 proto kernel scope link src 10.87.25.4 | |
100.64.0.0/29 dev int-62ec53ff-1 proto kernel scope link src 100.64.0.4 | |
root@oblocknode04:~# | |
*********************************************** | |
Introspect: | |
http://10.87.25.250:8088/Snh_ServiceInstanceList?si_name= | |
SNAT Healthchecks | |
Healthcheck interval can be configured in contrail-svc-monitor.conf as | |
check_service_interval=<seconds> |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment