logs9088.txt

[    0.000000@0]d Booting Linux on physical CPU 0x0
[    0.000000@0]d Linux version 4.9.269 (portisch@ubuntu) (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16)) ) #1 SMP PREEMPT Tue Mar 8 14:08:35 CET 2022
[    0.000000@0]d Boot CPU: AArch64 Processor [410fd034]
[    0.000000@0]d CoreELEC dt-id: gxl_p281_1g
[    0.000000@0]d Machine model: Amlogic
[    0.000000@0]d 	07400000 - 07500000,     1024 KB, ramoops@0x07400000
[    0.000000@0]d __reserved_mem_alloc_size, start:0x0000000005000000, end:0x0000000005400000, len:4 MiB
[    0.000000@0]d 	05000000 - 05400000,     4096 KB, linux,secmon
[    0.000000@0]d 	3e000000 - 40000000,    32768 KB, linux,di_cma
[    0.000000@0]d 	36000000 - 3e000000,   131072 KB, linux,ion-dev
[    0.000000@0]d Reserved memory: created DMA memory pool at 0x0000000036000000, size 0 MiB
[    0.000000@0]d 	36000000 - 36000000,        0 KB, linux,ppmgr
[    0.000000@0]d 	20000000 - 33400000,   315392 KB, linux,codec_mm_cma
[    0.000000@0]d 	36000000 - 36000000,        0 KB, linux,codec_mm_reserved
[    0.000000@0]d 	35000000 - 36000000,    16384 KB, linux,vdin1_cma
[    0.000000@0]d cma: Reserved 8 MiB at 0x0000000034800000
[    0.000000@0]d On node 0 totalpages: 261888
[    0.000000@0]d   DMA zone: 4092 pages used for memmap
[    0.000000@0]d   DMA zone: 0 pages reserved
[    0.000000@0]d   DMA zone: 261888 pages, LIFO batch:31
[    0.000000@0]d psci: probing for conduit method from DT.
[    0.000000@0]d psci: PSCIv0.2 detected in firmware.
[    0.000000@0]d psci: Using standard PSCI v0.2 function IDs
[    0.000000@0]d psci: Trusted OS migration not required
[    0.000000@0]d percpu: Embedded 21 pages/cpu s47576 r8192 d30248 u86016
[    0.000000@0]d pcpu-alloc: s47576 r8192 d30248 u86016 alloc=21*4096
[    0.000000@0]d pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000@0]d Detected VIPT I-cache on CPU0
[    0.000000@0]d CPU features: enabling workaround for ARM erratum 845719
[    0.000000@0]d Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 257796
[    0.000000@0]d Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.ddrclk=666MHz androidboot.hardware=amlogic mac=06:42:01:00:97:7b androidboot.mac=06:42:01:00:97:7b androidboot.slot_suffix=_a BOOT_IMAGE=kernel.img boot=LABEL=COREELEC disk=LABEL=STORAGE console=ttyS0,115200 console=tty0 no_console_suspend        vout=1080p60hz,en logo=osd0,loaded,0x3d800000 frac_rate_policy=0 native_4k_gui=0 hdr_policy=1 quiet ssh log_buf_len=16M systemd.show_status=auto
[    0.000000@0]d fb: osd1
[    0.000000@0]d fb: loaded
[    0.000000@0]d fb: 0x3d800000
[    0.000000@0]d fb: 576cvbs
[    0.000000@0]d vout: 576cvbs
[    0.000000@0]d vout: enable: 1
[    0.000000@0]d vout: 1080p60hz
[    0.000000@0]d vout: en: 1
[    0.000000@0]d fb: osd0
[    0.000000@0]d fb: loaded
[    0.000000@0]d fb: 0x3d800000
[    0.000000@0]d am_vecm: boot hdr_policy: 1
[    0.000000@0]d log_buf_len: 16777216 bytes
[    0.000000@0]d early log buf free: 520752(99%)
[    0.000000@0]d PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000@0]d Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000@0]d Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000@0]d Memory: 464708K/1047552K available (13182K kernel code, 2070K rwdata, 9864K rodata, 5056K init, 1428K bss, 74940K reserved, 507904K cma-reserved)
[    0.000000@0]d Virtual kernel memory layout:
[    0.000000@0]d     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000@0]d     vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000   (   250 GB)
[    0.000000@0]d       .text : 0xffffff8009080000 - 0xffffff8009d60000   ( 13184 KB)
[    0.000000@0]d     .rodata : 0xffffff8009d60000 - 0xffffff800a710000   (  9920 KB)
[    0.000000@0]d       .init : 0xffffff800a710000 - 0xffffff800ac00000   (  5056 KB)
[    0.000000@0]d       .data : 0xffffff800ac00000 - 0xffffff800ae05808   (  2071 KB)
[    0.000000@0]d        .bss : 0xffffff800ae05808 - 0xffffff800af6ab9c   (  1429 KB)
[    0.000000@0]d     fixed   : 0xffffffbefe7fd000 - 0xffffffbefec00000   (  4108 KB)
[    0.000000@0]d     PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000   (    16 MB)
[    0.000000@0]d     vmemmap : 0xffffffbf00000000 - 0xffffffc000000000   (     4 GB maximum)
[    0.000000@0]d               0xffffffbf00004000 - 0xffffffbf01000000   (    15 MB actual)
[    0.000000@0]d     memory  : 0xffffffc000100000 - 0xffffffc040000000   (  1023 MB)
[    0.000000@0]d SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000@0]d Preemptible hierarchical RCU implementation.
[    0.000000@0]d 	Build-time adjustment of leaf fanout to 64.
[    0.000000@0]d 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000@0]d RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[    0.000000@0]d NR_IRQS:64 nr_irqs:64 0
[    0.000000@0]d irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
[    0.000000@0]d amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0]d amlogic_init_sdemmc: register amlogic sdemmc clk
[    0.000000@0]d amlogic_init_gpu: register meson gpu clk
[    0.000000@0]d amlogic_init_media: register meson media clk
[    0.000000@0]d amlogic_init_misc: register meson misc clk
[    0.000000@0]d gxl_clkc_init initialization complete
[    0.000000@0]d arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000@0]d clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005@0]d sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.000047@0]d meson_bc_timer: mclk->mux_reg =        (ptrval),mclk->reg =        (ptrval)
[    0.000482@0]- Console: colour dummy device 80x25
[    0.000568@0]- console [tty0] enabled
[    0.000585@0]- Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    0.000594@0]- pid_max: default: 32768 minimum: 301
[    0.000694@0]- Security Framework initialized
[    0.000701@0]- SELinux:  Initializing.
[    0.000733@0]- SELinux:  Starting in permissive mode
[    0.000762@0]- Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000766@0]- Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[    0.001453@0]- ftrace: allocating 42179 entries in 165 pages
[    0.073343@0]- sched-energy: CPU device node has no sched-energy-costs
[    0.084919@0]- ASID allocator initialised with 65536 entries
[    0.118983@0]- secmon: can't fine clear_range
[    0.119772@0]- chip version = 21:D - A4:0
[    0.165440@1]d Detected VIPT I-cache on CPU1
[    0.165504@1]d CPU1: Booted secondary processor [410fd034]
[    0.197484@2]d Detected VIPT I-cache on CPU2
[    0.197535@2]d CPU2: Booted secondary processor [410fd034]
[    0.229555@3]d Detected VIPT I-cache on CPU3
[    0.229604@3]d CPU3: Booted secondary processor [410fd034]
[    0.229685@0]- Brought up 4 CPUs
[    0.229691@0]- SMP: Total of 4 processors activated.
[    0.229698@0]- CPU features: detected feature: 32-bit EL0 Support
[    0.229777@0]- CPU: All CPU(s) started at EL2
[    0.229802@0]d alternatives: patching kernel code
[    0.230720@0]- devtmpfs: initialized
[    0.241615@0]- clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.241632@0]- futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.241832@0]- pinctrl core: initialized pinctrl subsystem
[    0.243108@0]- NET: Registered protocol family 16
[    0.244053@0]- schedtune: init normalization constants...
[    0.244058@0]- schedtune: no energy model data
[    0.244060@0]- schedtune: disabled!
[    0.261615@0]- cpuidle: using governor menu
[    0.261746@0]- register canvas platform driver
[    0.261770@0]- register rdma platform driver
[    0.262652@0]- vdso: 2 pages (1 code @         (ptrval), 1 data @         (ptrval))
[    0.262670@0]- hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.264434@3]- DMA: preallocated 2048 KiB pool for atomic allocations
[    0.264691@3]- clkmsr: clkmsr: driver init
[    0.264698@3]- codec_mm_module_init
[    0.264766@3]- media_configs_system_init
[    0.265422@3]- pstore: using zlib compression
[    0.265494@3]- console [pstore-1] enabled
[    0.265497@3]- pstore: Registered ramoops as persistent store backend
[    0.265501@3]- ramoops: attached 0x100000@0x7400000, ecc: 0/0
[    0.267410@3]- aml_iomap: amlogic iomap probe done
[    0.268150@3]- meson_mhu: mhu ffffffc01dc53810 to scp done 0x1
[    0.270934@3]- vpu: driver version: v20210916(2-gxl)
[    0.270945@3]- vpu: load vpu_clk: 666666667Hz(7)
[    0.271109@3]- vpu: clktree_init
[    0.271186@3]- vpu: vpu_probe OK
[    0.274511@3]- clkmsr: msr_clk_reg0=        (ptrval),msr_clk_reg2=        (ptrval)
[    0.274523@3]- clkmsr c110875c.meson_clk_msr: failed to get msr ring reg0
[    0.275896@3]- aml_vdac_config_probe: cpu_id:0, name:meson-gx_l_m-vdac
[    0.276110@3]- aml_vdac_probe: ok
[    0.279773@3]- codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.279881@3]- codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
[    0.279884@3]- codec_mm_probe ok
[    0.280144@3]- canvas_probe reg=        (ptrval),size=400
[    0.280163@3]- canvas maped reg_base =        (ptrval)
[    0.282150@3]- cvbs_out: cvbsout_probe, cpu_id:0,name:meson-gxl-cvbsout
[    0.282284@3]- cvbs_out: find performance_pal config
[    0.282293@3]- cvbs_out: register cvbs module server ok
[    0.282295@3]- cvbs_out: register cvbs module vout2 server ok
[    0.282300@3]- cvbs_out: chrdev devno 264241152 for disp
[    0.282543@3]- cvbs_out: create cdev cvbs
[    0.282551@3]- cvbs_out: cvbsout_probe OK
[    0.284868@3]- rdma_probe,cpu_type:0, ver:0, len:8,rdma_table_size:65536
[    0.284877@3]d vpu: switch_vpu_mem_pd: unsupport vpu mod: 57
[    0.285180@3]- rdma_register, rdma_table_addr         (ptrval) rdma_table_addr_phy 34a00000 reg_buf         (ptrval)
[    0.285187@3]- rdma_register success, handle 1 table_size 65536
[    0.285191@3]- set_rdma_handle video rdma handle = 1.
[    0.285238@3]- classs created ok
[    0.285248@3]- classs file created ok
[    0.501174@3]- SCSI subsystem initialized
[    0.501404@3]- libata version 3.00 loaded.
[    0.501778@3]- usbcore: registered new interface driver usbfs
[    0.501838@3]- usbcore: registered new interface driver hub
[    0.501896@3]- usbcore: registered new device driver usb
[    0.502080@3]- pps_core: LinuxPPS API ver. 1 registered
[    0.502090@3]- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[    0.502115@3]- PTP clock support registered
[    0.502764@3]- secmon: reserve_mem_size:0x300000
[    0.502840@3]- secmon secmon: assigned reserved memory node linux,secmon
[    0.503138@3]- secmon: get page:        (ptrval), 5000
[    0.503145@3]- secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
[    0.503148@3]- secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
[    0.503456@3]- fb: osd_init_module
[    0.503869@3]- fb: viu vsync irq: 30
[    0.503881@3]- fb: rdma irq: 40
[    0.504113@3]- fb: osd_rdma_init: rdma_table p=0x34a10000,op=0x34a10000 , v=0x        (ptrval)
[    0.504142@3]- rdma_register, rdma_table_addr         (ptrval) rdma_table_addr_phy 34a11000 reg_buf         (ptrval)
[    0.504146@3]- rdma_register success, handle 2 table_size 4096
[    0.504148@3]- fb: osd_rdma_init:osd reset rdma handle = 2.
[    0.504173@3]- rdma_register, rdma_table_addr         (ptrval) rdma_table_addr_phy 34a12000 reg_buf         (ptrval)
[    0.504176@3]- rdma_register success, handle 3 table_size 4096
[    0.504178@3]- fb: osd_rdma_init:osd rdma handle = 3.
[    0.504193@3]- fb: mem_size: 0x800000
[    0.504195@3]- fb: mem_size: 0x1800000
[    0.504197@3]- fb: mem_size: 0x100000
[    0.504199@3]- fb: mem_size: 0x0
[    0.504200@3]- fb: mem_size: 0x0
[    0.504204@3]- fb: failed to init reserved memory
[    0.504238@3]- fb: init fbdev bpp is:32
[    0.505005@3]- fb: set osd0 reverse as NONE
[    0.510707@3]- fb: osd probe OK
[    0.511334@3]- hdmitx: system: Ver: 20210902
[    0.511491@3]- hdmitx: system: hpd irq = 38, viu1_vsync = -6
[    0.512207@3]d vpu: switch_vpu_mem_pd: unsupport vpu mod: 63
[    0.512215@3]- hdmitx: hw: hdmitx_get_isaformat:0x0
[    0.512218@3]- hdmitx: hw: P_HHI_HDMI_CLK_CNTL :0x100
[    0.512220@3]- hdmitx: hw: P_HHI_HDMI_PLL_CNTL :0xc000027b
[    0.512481@3]- hdmitx: hw: avmute set to 1
[    0.512559@3]- hdmitx: hdmitx_uboot_audio_en[604] data = 0x1f
[    0.513796@1]- hdmitx: system: can't request viu1_vsync irq
[    0.513829@0]h hdmitx: system: irq 4 0
[    0.514114@0]- hdmitx: system: plugout
[    0.514121@0]- hdmitx: hw: hdmitx_get_isaformat:0x0
[    0.514124@0]- hdmitx: hw: P_HHI_HDMI_CLK_CNTL :0x100
[    0.514126@0]- hdmitx: hw: P_HHI_HDMI_PLL_CNTL :0xc000027b
[    0.514133@0]d hdmitx: hdmitx_set_drm_pkt: disable drm pkt
[    0.514156@0]- hdmitx: hdmitx_set_hdr10plus_pkt: null vsif
[    0.514209@0]- hdmitx: system: cann't get valid mode
[    0.514547@3]- vout: error: dummy_venc_clktree_probe: get enci_top_gate error
[    0.514745@3]- vout: dummy_venc_probe OK
[    0.515627@3]- hdmitx: hdmitx_set_current_vmode[5442]
[    0.515634@3]- hdmitx: system: recalc before 1080p60hz 60 1, frac 0
[    0.515638@3]- hdmitx: system: recalc after 1080p60hz 60 1, frac 0
[    0.515640@3]- hdmitx: alread display in uboot
[    0.515644@3]- hdmitx: system: update rx hdr info 0
[    0.515646@3]- vout: init mode 1080p60hz set ok
[    0.515651@3]- fb: current vmode=1080p60hz, cmd: 0x60000
[    0.515654@3]- vout: aml_vout_probe OK
[    0.516188@3]- chip type:0x21
[    0.516241@3]- bytes_per_cycle:8, reg:ffffffff
[    0.516735@3]- MEMORY:[100000+3ff00000]
[    0.516743@3]- ramdump_probe, storage device:data
[    0.516746@3]- NO valid ramdump args:0 0
[    0.516766@3]- ramdump_probe, set sticky to 8400
[    0.517050@3]- Advanced Linux Sound Architecture Driver Initialized.
[    0.518100@3]- NetLabel: Initializing
[    0.518107@3]- NetLabel:  domain hash size = 128
[    0.518109@3]- NetLabel:  protocols = UNLABELED CIPSOv4
[    0.518171@3]- NetLabel:  unlabeled traffic allowed by default
[    0.519441@3]- clocksource: Switched to clocksource arch_sys_counter
[    0.612433@0]- VFS: Disk quotas dquot_6.6.0
[    0.612614@0]- VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.612846@0]- FS-Cache: Loaded
[    0.638902@0]- NET: Registered protocol family 2
[    0.668248@0]- TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.668342@0]- TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[    0.668665@0]- TCP: Hash tables configured (established 8192 bind 8192)
[    0.668939@0]- UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.668970@0]- UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.669517@0]- NET: Registered protocol family 1
[    0.670815@2]- RPC: Registered named UNIX socket transport module.
[    0.670832@2]- RPC: Registered udp transport module.
[    0.670835@2]- RPC: Registered tcp transport module.
[    0.670840@2]- RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.670870@2]- PCI: CLS 0 bytes, default 64
[    0.675015@2]- Wifi: bcmdhd_init_wlan_mem: [dhd] STATIC-MSG) bcmdhd_init_wlan_mem : 101.10.361.10 (wlan=r892223-20210623-1)
[    0.676599@2]- Wifi: bcmdhd_init_wlan_mem: [dhd] STATIC-MSG) bcmdhd_init_wlan_mem : prealloc ok: 8162304(7971K)
[    0.678891@0]- Unpacking initramfs...
[    0.740452@0]- Freeing initrd memory: 7176K
[    0.741640@0]- efusekeynum: 4
[    0.741670@0]- efusekeyname:             mac	offset:     0	size:     6
[    0.741683@0]- efusekeyname:          mac_bt	offset:     6	size:     6
[    0.741694@0]- efusekeyname:        mac_wifi	offset:    12	size:     6
[    0.741706@0]- efusekeyname:            usid	offset:    18	size:    16
[    0.742341@1]- efuse efuse: probe OK!
[    0.743745@3]- clear:19800000, free:19800000, tick:208999 us
[    0.744230@1]- unifykey: no efuse-version set, use default value: -1
[    0.744674@1]- unifykey: aml_unifykeys_init done!
[    0.745635@1]- hw perfevents: clusterb_enabled = 0
[    0.745642@1]- hw perfevents: cpumasks 0xf, 0x0
[    0.745672@1]- hw perfevents: cluster A irq = 17
[    0.745755@1]- hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    0.748193@3]- audit: initializing netlink subsys (disabled)
[    0.748251@3]- audit: type=2000 audit(0.700:1): initialized
[    0.749104@3]- workingset: timestamp_bits=45 max_order=18 bucket_order=0
[    0.757991@3]- squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.758702@3]- FS-Cache: Netfs 'nfs' registered for caching
[    0.759391@3]- NFS: Registering the id_resolver key type
[    0.759481@3]- Key type id_resolver registered
[    0.759485@3]- Key type id_legacy registered
[    0.759498@3]- nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.759502@3]- nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[    0.759731@3]- FS-Cache: Netfs 'cifs' registered for caching
[    0.760676@3]- SELinux:  Registering netfilter hooks
[    0.764178@1]- NET: Registered protocol family 38
[    0.764192@1]- Key type asymmetric registered
[    0.764196@1]- Asymmetric key parser 'x509' registered
[    0.764461@1]- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 241)
[    0.764469@1]- io scheduler noop registered (default)
[    0.764472@1]- io scheduler deadline registered
[    0.764632@1]- io scheduler cfq registered
[    0.767239@2]d random: fast init done
[    0.767280@2]- random: crng init done
[    0.767586@1]- [drm] Initialized
[    0.767714@1]- Unable to detect cache hierarchy for CPU 0
[    0.773604@1]- loop: module loaded
[    0.775088@1]- mtdoops: mtd device (mtddev=name/number) must be supplied
[    0.775948@1]- libphy: Fixed MDIO Bus: probed
[    0.776984@1]-  ee eth reset:Addr = 00000000843fa766
[    0.777231@1]- meson6-dwmac c9410000.ethernet: no reset control found
[    0.777236@1]- stmmac - user ID: 0x11, Synopsys ID: 0x37
[    0.777239@1]-  Ring mode enabled
[    0.777242@1]-  DMA HW capability register supported
[    0.777245@1]-  Normal descriptors
[    0.777247@1]-  RX Checksum Offload Engine supported
[    0.777249@1]- 	COE Type 2
[    0.777251@1]-  TX Checksum insertion supported
[    0.777252@1]-  Wake-Up On Lan supported
[    0.777294@1]-  Enable RX Mitigation via HW Watchdog Timer
[    0.780264@1]- libphy: stmmac: probed
[    0.780275@1]- eth%d: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
[    0.782157@1]- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.782170@1]- ehci-pci: EHCI PCI platform driver
[    0.782237@1]- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.782271@1]- ohci-pci: OHCI PCI platform driver
[    0.782835@1]- usbcore: registered new interface driver cdc_acm
[    0.782840@1]- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.782903@1]- usbcore: registered new interface driver usb-storage
[    0.783025@1]- usbcore: registered new interface driver usbserial
[    0.783073@1]- usbcore: registered new interface driver usbserial_generic
[    0.783117@1]- usbserial: USB Serial support registered for generic
[    0.783611@1]- mousedev: PS/2 mouse device common for all mice
[    0.784151@1]- i2c /dev entries driver
[    0.785097@1]- cpu cpu0: bL_cpufreq_init: CPU 0 initialized
[    0.785174@1]- arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
[    0.787010@1]- ledtrig-cpu: registered to indicate activity on CPUs
[    0.787704@1]- hidraw: raw HID events driver (C) Jiri Kosina
[    0.788171@1]- usbcore: registered new interface driver usbhid
[    0.788176@1]- usbhid: USB HID core driver
[    0.788650@1]- c81004c0.serial: clock gate not found
[    0.788733@1]- meson_uart c81004c0.serial: ==uart0 reg addr = 00000000404cc2d8
[    0.788777@1]- c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 20, base_baud = 1500000) is a meson_uart
[    0.788793@1]- meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
[    0.891499@1]- console [ttyS0] enabled
[    0.892053@1]- c11084c0.serial: clock gate not found
[    0.896486@1]- meson_uart c11084c0.serial: ==uart1 reg addr = 00000000532b1c50
[    0.896544@1]- c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 21, base_baud = 10416666) is a meson_uart
[    0.897764@1]- amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff8008501000
[    0.898012@1]- amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
[    0.903242@1]- amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff8008505080
[    0.905590@1]- aml_dma c883e000.aml_dma: Aml dma
[    0.907214@3]- aml_aes_dma c883e000.aml_dma:aml_aes: Aml AES_dma
[    0.908323@3]- aml_tdes_dma c883e000.aml_dma:aml_tdes: Aml TDES_dma
[    0.909210@3]- gpio-keypad gpio_keypad: power key(116) registed.
[    0.909390@3]- input: gpio_keypad as /devices/platform/gpio_keypad/input/input0
[    0.912269@3]- ion_dev ion_dev: assigned reserved memory node linux,ion-dev
[    0.912285@3]- ion-dev: failed get fb memory
[    0.912292@3]- ion-dev: failed get secure memory
[    0.912630@3]- ion-dev: add heap type:0 id:0
[    0.912722@3]- ion-dev: add heap type:5 id:5
[    0.912778@3]- ion-dev: add heap type:4 id:4
[    0.912780@3]- ion-dev: dev_ion_probe, create 3 heaps
[    0.912979@3]- ge2d: ge2d_init_module
[    0.913768@3]- ge2d: ge2d clock is 400 MHZ
[    0.913781@3]- ge2d: register address resource is not found
[    0.913826@3]- ge2d: reserved mem is not used
[    0.913875@3]- ge2d: ge2d start monitor
[    0.914536@3]- new arch is :0.
[    0.914660@3]- [tsync_pcr_init]init success.
[    0.915022@3]- amvideom vsync irq: 30, cpu_type:1
[    0.915067@3]- create_ge2d_work_queue video task ok
[    0.916023@3]- create_video_receiver video_render.0  00000000d7a3bb14, path_id:2 success
[    0.916033@3]- create_video_receiver video_render.1  00000000f203ed83, path_id:3 success
[    0.916475@3]- amvideocap_probe,amvideocap
[    0.917779@3]- use cma buf.
[    0.920909@3]- hdmitx: hdcp: hdmitx_hdcp_init
[    0.921701@3]- DI: di_module_init ok.
[    0.921938@3]- DI: di_probe:
[    0.921946@3]- DI: di_probe: major 508
[    0.922222@3]- match name: di_deinterlace:id[255]
[    0.922297@3]- deinterlace deinterlace: assigned reserved memory node linux,di_cma
[    0.922302@3]- di:flag_cma=1
[    0.922304@3]- DI: CMA size 0x2000000.
[    0.922326@3]- pre_irq:44
[    0.922334@3]- post_irq:45
[    0.922337@3]- DI: di_probe allocate rdma channel 0.
[    0.922355@3]- DI: support multi decoding 255~27~28.
[    0.922514@3]- DI: ic_id:0x4 [b]0
[    0.922525@3]- DI: di_probe:Di use HRTIMER
[    0.922711@3]- DI: di_probe:ok
[    0.922816@3]- dim:dim_module_init
[    0.923547@3]- dim:dim_module_init finish
[    0.923553@3]- dil:dil_init.
[    0.923840@3]- dil:dil_init ok.
[    0.924112@3]- Reserved memory: failed to init DMA memory pool at 0x0000000036000000, size 0 MiB
[    0.929304@3]- PPMGRDRV: info: ppmgr_dev major:507
[    0.929725@3]- aml_vecm_init:module init
[    0.930102@3]- VECM probe start
[    0.930464@3]- Can't find  tv_mode.
[    0.930471@3]- Can't find  lut3d_en.
[    0.930477@3]- Can't find  blue stretch en.
[    0.930526@3]- vlock clk not cfg
[    0.943443@3]- vlock_status_init vlock_en:1
[    0.943686@3]- aml_vecm_probe: ok
[    0.943794@3]- amdolby_vision_init:module init
[    0.944811@3]- meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
[    0.983457@3]- meson-mmc: meson_mmc_probe() : success!
[    0.988451@0]- meson-mmc: gpio_cd = 1c1
[    1.027450@0]- meson-mmc: meson_mmc_probe() : success!
[    1.054889@3]- meson-mmc: Data 1 aligned delay is 0
[    1.054897@3]- meson-mmc: emmc: clk 50000000 SDR mode tuning start
[    1.067485@0]- meson-mmc: meson_mmc_probe() : success!
[    1.069895@0]- aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
[    1.070457@0]- input: aml_vkeypad as /devices/platform/rtc/input/input1
[    1.075910@3]- meson-mmc: emmc: adj_win: < 0 1 2 3 4 5 6 7 9 10 11 12 13 14 15 16 17 18 19 >
[    1.075913@0]- input: cec_input as /devices/virtual/input/input2
[    1.075919@3]- meson-mmc: emmc: best_win_start =9, best_win_size =19
[    1.075924@3]- meson-mmc: emmc: clock=0x1000254, adjust=0x122000
[    1.075929@3]- meson-mmc: emmc: clock =0x1000254, delay=0x0, adjust=0x122000
[    1.076048@3]- emmc: new HS200 MMC card at address 0001
[    1.076052@0]- emmc: clock 50000000, 8-bit-bus-width
[    1.076052@0]-  
[    1.076193@0]- cectx c810023c.aocec: not find 'port_num'
[    1.076282@0]- get sleep state error!
[    1.076284@0]- get A default state
[    1.076316@0]- cectx c810023c.aocec: no clock regs
[    1.080747@0]- cectx c810023c.aocec: not find 'output'
[    1.087550@3]- mmcblk0: emmc:0001 8GTF4R 7.28 GiB 
[    1.087905@3]- mmcblk0boot0: emmc:0001 8GTF4R partition 1 4.00 MiB
[    1.088116@3]- mmcblk0boot1: emmc:0001 8GTF4R partition 2 4.00 MiB
[    1.089279@0]- cectx c810023c.aocec: wakeup_reason:0x0
[    1.090876@0]- cectx c810023c.aocec: wakeup_data: 0x0 0x0
[    1.092433@3]- mmcblk0rpmb: emmc:0001 8GTF4R partition 3 512 KiB
[    1.096789@3]- meson-mmc: Enter aml_emmc_partition_ops
[    1.096900@0]- audio_dsp: [dsp]register dsp to char divece(257)
[    1.097200@0]- amaudio: amaudio: driver amaudio init!
[    1.097480@3]- meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
[    1.097485@3]- meson-mmc: add_emmc_partition
[    1.097801@0]- amaudio: amaudio_init - amaudio: driver amaudio succuess!
[    1.099629@3]- card key: card_blk_probe.
[    1.099642@3]- emmc_key_init:493 emmc key lba_start:0x12020,lba_end:0x12422
[    1.099934@3]- sysled: module init
[    1.100436@3]- meson_wdt c11098d0.watchdog: start watchdog
[    1.100442@3]- meson_wdt c11098d0.watchdog: create hrtimer for watch dog
[    1.100797@3]- meson_wdt c11098d0.watchdog: AML Watchdog Timer probed done
[    1.101825@3]- not get gpio_en
[    1.101831@3]- not get gpio_hostwake
[    1.101833@3]- not get gpio_btwakeup
[    1.102021@3]- request_irq error ret=-22
[    1.102119@3]- dev_pm_set_wake_irq failed: -22
[    1.105037@3]- input: input_btrcu as /devices/platform/bt-dev/input/input3
[    1.107644@3]- dmc_monitor_probe
[    1.108181@3]- calc 58abb16754, store 0
[    1.108188@3]- cpy 1 is not valid
[    1.109080@3]- defendkey c8834500.defendkey: Reserved memory is not enough!
[    1.115080@3]- defendkey: probe of c8834500.defendkey failed with error -22
[    1.116406@3]- bl301_manager: driver init
[    1.116419@3]- bl301_manager: IR remote wake-up code: 0xffffffff
[    1.116422@3]- bl301_manager: IR remote wake-up code mask: 0xffffffff
[    1.116424@3]- bl301_manager: IR remote wake-up code protocol: 0x0
[    1.116426@3]- bl301_manager: enable 5V system power on suspend/power off state: 0
[    1.118339@3]- calc 58abb16754, store 0
[    1.118346@3]- cpy 0 is not valid
[    1.118403@3]- emmc key: emmc_key_init:519 ok.
[    1.118407@3]- meson-mmc: amlmmc_dtb_init: register dtb chardev
[    1.126041@3]- usbcore: registered new interface driver snd-usb-audio
[    1.127990@3]- aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
[    1.128021@3]- T9015 acodec used by meson, tdmout:0
[    1.129702@3]- snd_i2s_dai: clock source gate top_glue : 0000000061b00187
[    1.129732@3]- snd_i2s_dai: clock source gate aud_buf : 0000000046574c64
[    1.129759@3]- snd_i2s_dai: clock source gate i2s_out : 00000000c4eeeaa6
[    1.129806@3]- snd_i2s_dai: clock source gate amclk_measure : 0000000045434d91
[    1.129837@3]- snd_i2s_dai: clock source gate aififo2 : 00000000ab4c476c
[    1.129874@3]- snd_i2s_dai: clock source gate aud_mixer : 00000000f2f25d7b
[    1.129913@3]- snd_i2s_dai: clock source gate mixer_reg : 0000000033cefeac
[    1.129956@3]- snd_i2s_dai: clock source gate adc : 00000000818d06b2
[    1.130002@3]- snd_i2s_dai: clock source gate top_level : 00000000cb992bfe
[    1.130052@3]- snd_i2s_dai: clock source gate aoclk : 000000008733d77c
[    1.130105@3]- snd_i2s_dai: clock source gate aud_in : 00000000e61a7e73
[    1.130112@3]- snd_i2s_dai: ignore aud_buf/vdac_clk gate
[    1.130346@3]- aml-i2s-dai I2S: I2S Mic is in platform!
[    1.130785@3]- meson-mmc: total valid 2
[    1.131049@3]- meson-mmc: amlmmc_dtb_init: register dtb chardev OK
[    1.131061@3]- meson-mmc: amlmmc_ddr_init: register ddr_parameter chardev
[    1.131266@3]- meson-mmc: amlmmc_ddr_init: register ddr parameter chardev OK
[    1.131312@3]- meson-mmc: Exit aml_emmc_partition_ops OK.
[    1.133492@3]- snd_pcm_dai: pcm mode detection =1
[    1.133736@3]- snd_pcm_dai: tdm config: 0x0, 0x0, 0, 0
[    1.134340@3]- snd_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
[    1.134485@3]- snd_spdif_dai: set normal 512 fs /4 fs
[    1.134487@3]- snd_spdif_dai: set 958 audio clk div 4
[    1.135247@3]- spdif-dit spdif_codec: audio_spdif_out_mute can't get pinctrl
[    1.136790@3]- spdif-dit spdif_codec: audio_spdif_in_mute can't get pinctrl
[    1.143609@3]- spdif-dit spdif_codec: audio_spdif_in can't get pinctrl
[    1.150772@3]- snd_card_meson: aml_card_dai_parse_of codec_node count:1
[    1.150853@3]- snd_card_meson: aml_card_dai_parse_of codec_node count:1
[    1.150948@3]- snd_card_meson: aml_card_dai_parse_of codec_node count:1
[    1.231518@0]- meson-mmc: card IN
[    1.335951@0]- meson-mmc: normal card in
[    1.359713@3]- snd_card_meson: headphone detection disable=1
[    1.359720@3]- snd_card_meson: no spk event delay time set
[    1.360936@3]- aml_meson_snd_card aml_sound_meson: T9015-audio-hifi <-> I2S mapping ok
[    1.361905@3]- aml_meson_snd_card aml_sound_meson: dit-hifi <-> SPDIF mapping ok
[    1.362007@3]- snd_pcm: enter aml_pcm_new dai->name: PCM dai->id: 0
[    1.362656@3]- aml_meson_snd_card aml_sound_meson: pcm2bt-pcm <-> PCM mapping ok
[    1.362686@3]- aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTL
[    1.365297@3]- aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
[    1.374605@3]- aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTR
[    1.382712@3]- aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
[    1.392182@3]- aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Playback debugfs file
[    1.392188@3]- aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Capture debugfs file
[    1.393644@3]- snd_card_meson: enable i2sclk in startup
[    1.398712@3]- Register vad
[    1.399892@3]- NET: Registered protocol family 10
[    1.400946@3]- NET: Registered protocol family 17
[    1.401032@3]- Key type dns_resolver registered
[    1.401765@3]- Registered swp emulation handler
[    1.401781@3]- Registered cp15_barrier emulation handler
[    1.401790@3]- Registered setend emulation handler
[    1.401838@3]- disable EAS feature
[    1.402630@1]- registered taskstats version 1
[    1.410162@3]- dwc3 c9000000.dwc3: Configuration mismatch. dr_mode forced to host
[    1.414075@3]- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.414116@3]- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    1.414505@3]- xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x02010010
[    1.414555@3]- xhci-hcd xhci-hcd.0.auto: irq 36, io mem 0xc9000000
[    1.414723@3]- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.414729@3]- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.414733@3]- usb usb1: Product: xHCI Host Controller
[    1.414737@3]- usb usb1: Manufacturer: Linux 4.9.269 xhci-hcd
[    1.414740@3]- usb usb1: SerialNumber: xhci-hcd.0.auto
[    1.415494@1]- hub 1-0:1.0: USB hub found
[    1.415542@1]- hub 1-0:1.0: 2 ports detected
[    1.415892@1]- xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    1.415907@1]- xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    1.415967@1]- usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.416068@1]- usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.416073@1]- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.416077@1]- usb usb2: Product: xHCI Host Controller
[    1.416081@1]- usb usb2: Manufacturer: Linux 4.9.269 xhci-hcd
[    1.416085@1]- usb usb2: SerialNumber: xhci-hcd.0.auto
[    1.416700@2]- hub 2-0:1.0: USB hub found
[    1.416735@2]- hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    1.418567@2]- usb usb2: Unsupported the hub
[    1.423329@2]- aml_vrtc rtc: setting system clock to 2021-08-06 14:43:42 UTC (1628261022)
[    1.423824@2]- dwc_otg c9100000.dwc2_a: dwc_otg_driver_probe(0000000081559155)
[    1.423862@2]- dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
[    1.423870@2]- dwc_otg_driver_probe host only, not probe usb_otg!!!
[    1.425792@0]- cpucore_cooling_register, max_cpu_core_num:4
[    1.431781@0]- gxbb_pm: enter meson_pm_probe!
[    1.431804@0]- gxbb_pm: system suspend level: 1
[    1.431814@0]- no vddio3v3_en pin
[    1.431830@0]- pm-meson aml_pm: Can't get switch_clk81
[    1.431913@0]- gxbb_pm: meson_pm_probe done
[    1.432379@0]- ALSA device list:
[    1.432384@0]-   #0: AML-MESONAUDIO
[    1.435123@0]- Freeing unused kernel memory: 5056K
[    1.503240@2]- fb: malloc_osd_memory, cma:ffffff800aec07f8
[    1.503250@2]- fb: malloc_osd_memory, 1224, base:0x0000000034800000, size:8388608
[    1.503291@2]- fb: use ion buffer for fb memory, fb_index=0
[    1.517056@2]- meson-fb meson-fb: create ion_client ffffffc01d3e7480, handle=ffffffc01dc4b380
[    1.517067@2]- meson-fb meson-fb: ion memory(0): created fb at 0x0000000036000000, size 24 MiB
[    1.517070@2]- fb: Frame buffer memory assigned at
[    1.517075@2]- fb:  0, phy: 0x0000000036000000, vir:0xffffff800bcf5000, size=24576K
[    1.517075@2]- 
[    1.517080@2]- fb: logo_index=0,fb_index=0
[    1.517140@2]- fb: osd[0] canvas.idx =0x40
[    1.517142@2]- fb: osd[0] canvas.addr=0x36000000
[    1.517144@2]- fb: osd[0] canvas.width=7680
[    1.517145@2]- fb: osd[0] canvas.height=3240
[    1.517147@2]- fb: osd[0] frame.width=1920
[    1.517148@2]- fb: osd[0] frame.height=1080
[    1.517150@2]- fb: osd[0] out_addr_id =0x0
[    1.565558@0]- sd: new high speed SDXC card at address aaaa
[    1.566115@0]- sd: clock 50000000, 4-bit-bus-width
[    1.566115@0]-  
[    1.566116@0]- mmcblk1: sd:aaaa SC64G 59.5 GiB 
[    1.567343@0]-  mmcblk1: p1 p2
[    2.539764@2]- fb: osd_release now.index=0,open_count=1
[    2.542187@1]- fb: malloc_osd_memory, cma:ffffff800aec07f8
[    2.542197@1]- fb: malloc_osd_memory, 1224, base:0x0000000034800000, size:8388608
[    2.542201@1]- fb: use ion buffer for fb memory, fb_index=1
[    2.543098@1]- meson-fb meson-fb: create ion_client ffffffc01d3e7480, handle=ffffffc01d3e2b80
[    2.543107@1]- meson-fb meson-fb: ion memory(1): created fb at 0x0000000037800000, size 1 MiB
[    2.543110@1]- fb: Frame buffer memory assigned at
[    2.543115@1]- fb:  1, phy: 0x0000000037800000, vir:0xffffff800d4f6000, size=1024K
[    2.543115@1]- 
[    2.543119@1]- fb: logo_index=0,fb_index=1
[    2.543124@1]- fb: ---------------clear fb1 memory 0000000093a46014
[    2.544042@1]- fb: osd[1] canvas.idx =0x43
[    2.544045@1]- fb: osd[1] canvas.addr=0x37800000
[    2.544048@1]- fb: osd[1] canvas.width=128
[    2.544050@1]- fb: osd[1] canvas.height=32
[    2.544052@1]- fb: osd[1] frame.width=32
[    2.544054@1]- fb: osd[1] frame.height=32
[    2.544057@1]- fb: osd[1] out_addr_id =0x0
[    3.563783@1]- fb: osd_release now.index=1,open_count=1
[    3.751440@3]- lcd vlock_en=1, vlock_mode=0x4
[    4.587797@2]- VID: VD1 off
[    4.587970@2]- fb: osd[0] enable: 1 (sh)
[    5.611654@2]- fb: osd[1] enable: 0 (sh)
[    6.647062@0]- init: ### Loading kernel modules
[    6.650213@1]- init: ### Loading kernel module font
[    6.651958@3]- init: ### Loading kernel module softcursor
[    6.653586@1]- init: ### Loading kernel module bitblit
[    6.655321@2]- init: ### Loading kernel module fbcon
[    7.659463@1]- Console: switching to colour frame buffer device 240x67
[    7.683320@2]- init: ### Set console font
[    7.687973@0]- init: ### Checking disk(s):  LABEL=COREELEC LABEL=STORAGE
[    8.251901@1]- init: ### Cannot initialize conversion from codepage 850 to ANSI_X3.4-1968: Invalid argument
[    8.252210@1]- init: ### Cannot initialize conversion from ANSI_X3.4-1968 to codepage 850: Invalid argument
[    8.252377@1]- init: ### Using internal CP850 conversion table
[    8.252491@1]- init: ### fsck.fat 4.2 (2021-01-31)
[    8.252663@1]- init: ### /dev/mmcblk1p1: 161 files, 28133/65501 clusters
[    8.252863@1]- init: ### STORAGE: clean, 15/15460352 files, 3893288/61839360 blocks
[    8.254674@1]- init: ### No filesystem errors found, continuing...
[    8.254847@1]- init: ### Mounting flash
[    8.254969@1]- init: ### mount filesystem LABEL=COREELEC ...
[    8.414551@1]- init: ### Cleaning up flash (if required)
[    8.415133@1]- init: ### mount filesystem /flash/SYSTEM ...
[    8.477791@1]- init: ### Mounting storage
[    8.478029@1]- init: ### mount filesystem LABEL=STORAGE ...
[    8.621714@0]- EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities
[    8.622257@0]- EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities
[    8.864648@1]- EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    8.876187@3]- init: ### Loading bootsplash
[    8.885104@3]- init: ### Checking for updates
[    8.895710@3]- init: ### Preparing system
[    9.159929@3]- kernel-overlays-setup: setup base modules
[    9.279402@2]- kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/4.9.269
[    9.357278@1]- kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
[    9.357568@1]- kernel-overlays-setup: done
[    9.642964@1]- cgroup: cgroup2: unknown option "nsdelegate"
[    9.651527@1]- systemd[1]: systemd 247.9 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    9.652311@1]- systemd[1]: Detected architecture arm64.
[    9.652416@1]- systemd[1]: Detected first boot.
[    9.658150@1]- systemd[1]: Set hostname to <CoreELEC>.
[    9.658220@1]- systemd[1]: Cannot open /etc/machine-id: No such file or directory
[   10.162478@1]- systemd[1]: Populated /etc with preset unit settings.
[   10.436841@1]- systemd[1]: Queued start job for default target Kodi Mediacenter Interface.
[   10.489578@1]- systemd[1]: Created slice Slice /system/modprobe.
[   10.491222@1]- systemd[1]: Created slice User and Session Slice.
[   10.491738@1]- systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   10.492061@1]- systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.492443@1]- systemd[1]: Reached target Host and Network Name Lookups.
[   10.492522@1]- systemd[1]: Reached target Paths.
[   10.492690@1]- systemd[1]: Reached target Slices.
[   10.509386@1]- systemd[1]: Listening on RPCbind Server Activation Socket.
[   10.509588@1]- systemd[1]: Reached target RPC Port Mapper.
[   10.510088@1]- systemd[1]: Listening on initctl Compatibility Named Pipe.
[   10.512130@1]- systemd[1]: Listening on Journal Audit Socket.
[   10.513640@1]- systemd[1]: Listening on Journal Socket (/dev/log).
[   10.515780@1]- systemd[1]: Listening on Journal Socket.
[   10.518482@1]- systemd[1]: Listening on udev Control Socket.
[   10.519804@1]- systemd[1]: Listening on udev Kernel Socket.
[   10.520594@1]- systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[   10.524991@1]- systemd[1]: Mounting POSIX Message Queue File System...
[   10.533944@1]- systemd[1]: Mounting Kernel Debug File System...
[   10.539374@1]- systemd[1]: Mounting Kernel Trace File System...
[   10.544420@1]- systemd[1]: Mounting Variable Directory...
[   10.549666@0]- meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
[   10.550002@1]- systemd[1]: Started Early root shell on /dev/ttyS0 FOR DEBUGGING ONLY.
[   10.556493@3]- systemd[1]: Starting Create list of static device nodes for the current kernel...
[   10.567313@3]- systemd[1]: Starting Load Kernel Module configfs...
[   10.576177@3]- systemd[1]: Starting Load Kernel Module drm...
[   10.587150@3]- systemd[1]: Starting Load Kernel Module fuse...
[   10.595855@3]- systemd[1]: Starting Create Persistent Log Directory on /storage and rotate large logs...
[   10.603129@3]- systemd[1]: Starting Mounting swapfile...
[   10.627396@0]- systemd[1]: Starting Rebuild Hardware Database...
[   10.639010@0]- systemd[1]: Starting Load Kernel Modules...
[   10.645340@0]- systemd[1]: Starting Setup NTP servers for timesyncd...
[   10.650707@0]- systemd[1]: Starting Coldplug All udev Devices...
[   10.656584@0]- systemd[1]: Starting Wait for Kernel Time Synchronisation...
[   10.677945@0]- systemd[1]: Mounted POSIX Message Queue File System.
[   10.679073@0]- systemd[1]: Mounted Kernel Debug File System.
[   10.680548@0]- systemd[1]: Mounted Kernel Trace File System.
[   10.682275@0]- systemd[1]: Mounted Variable Directory.
[   10.688474@0]- systemd[1]: Finished Create list of static device nodes for the current kernel.
[   10.701186@3]- systemd[1]: Finished Create Persistent Log Directory on /storage and rotate large logs.
[   10.702685@3]- systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
[   10.750482@2]- systemd[1]: Finished Setup NTP servers for timesyncd.
[   10.763052@1]- systemd[1]: [email protected]: Succeeded.
[   10.779169@3]- media: Linux media interface: v0.10
[   10.790883@2]- systemd[1]: Finished Load Kernel Module configfs.
[   10.794633@2]- systemd[1]: [email protected]: Succeeded.
[   10.796597@2]- systemd[1]: Finished Load Kernel Module drm.
[   10.806559@2]- systemd[1]: Mounting Kernel Configuration File System...
[   10.833573@3]- fuse init (API version 7.26)
[   10.835929@2]- Linux video capture interface: v2.00
[   10.873444@2]- systemd[1]: [email protected]: Succeeded.
[   10.875767@3]- amlvideo-000: V4L2 device registered as video10
[   10.875782@3]- amlvid:info: v4l2_dev.name=:amlvideo-001
[   10.877028@2]- systemd[1]: Finished Load Kernel Module fuse.
[   10.879962@2]- systemd[1]: Finished Mounting swapfile.
[   10.880907@2]- systemd[1]: Reached target Swap.
[   10.884871@2]- amlvideo-001: V4L2 device registered as video23
[   10.900975@2]- systemd[1]: Mounting FUSE Control File System...
[   10.909212@3]- video_framerate_adapter: loading out-of-tree module taints kernel.
[   10.911974@1]- Registered frame rate driver success.
[   10.916103@1]- register clk_set_setting cpu[33]
[   10.938607@3]- systemd[1]: Mounting Temporary Directory (/tmp)...
[   10.943228@0]- Registered firmware driver success.
[   10.945362@0]- Try to load video/h264_enc.bin  ...
[   10.945484@0]- load firmware size : 76288, Name : video/h264_enc.bin.
[   10.947348@0]- Try to load video/video_ucode.bin  ...
[   10.949806@0]- load firmware size : 1871104, Name : video/video_ucode.bin.
[   10.949823@0]- The fw driver version (v0.2) is lower than the pkg version (v0.3).
[   10.949825@0]- The driver version is too low that may affect the work please update asap.
[   10.976698@3]- systemd[1]: Mounted Kernel Configuration File System.
[   10.977858@3]- systemd[1]: Mounted FUSE Control File System.
[   10.979025@3]- systemd[1]: Mounted Temporary Directory (/tmp).
[   10.981031@3]- systemd[1]: Reached target Local File Systems.
[   10.990105@3]- systemd[1]: Starting Setup machine-id...
[   11.018013@0]- Amlogic A/V streaming port init
[   11.029695@0]- get gate demux control ok 00000000c4b9150e
[   11.029717@0]- get gate parser_top control ok 0000000099a36994
[   11.029736@0]- get gate vdec control ok 000000003c53c152
[   11.029759@0]- get gate clk_81 control ok 000000007290efa2
[   11.029785@0]- get gate clk_vdec_mux control ok 000000009393dd89
[   11.029813@0]- get gate clk_hcodec_mux control ok 00000000ff5556a7
[   11.029846@0]- get gate clk_hevc_mux control ok 00000000ac316fbe
[   11.029854@0]- get gate clk_hevcb_mux control failed           (null)
[   11.029858@0]- get gate ahbarb0 control failed           (null)
[   11.029863@0]- get gate asyncfifo control failed           (null)
[   11.029867@0]- get gate clk_hevcf_mux control failed           (null)
[   11.029870@0]- get mux clk err.
[   11.029873@0]- get mux clk err.
[   11.029874@0]- get mux clk err.
[   11.029875@0]- get mux clk err.
[   11.058448@0]- amvdec_avs module init
[   11.085725@0]- amvdec_h264 module init
[   11.100407@0]- amvdec_h265 module init
[   11.118790@2]- ammvdec_h264 module init
[   11.129232@2]- ammvdec_mpeg12 module init
[   11.134030@2]- ammvdec_mpeg4_driver_init_module 
[   11.151835@0]- systemd[1]: Finished Setup machine-id.
[   11.164276@0]- systemd[1]: Starting Journal Service...
[   11.185158@0]- amvdec_vc1 module init
[   11.196877@0]- amvdec_vp9 module init
[   11.203334@3]- systemd[1]: Starting Create Static Device Nodes in /dev...
[   11.222815@3]- Triggered SDIO WiFi power on and bus rescan.
[   11.222878@3]- aml_wifi wifi: [extern_wifi_set_enable] WIFI  Disable! 486
[   11.287115@3]- systemd[1]: Finished Create Static Device Nodes in /dev.
[   11.422279@1]- systemd[1]: Started Journal Service.
[   11.458902@2]- systemd-journald[2631]: Received client request to flush runtime journal.
[   11.531585@2]- aml_wifi wifi: [extern_wifi_set_enable] WIFI  Enable! 486
[   11.858441@0]h meson-mmc: sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
[   11.858451@0]h meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
[   11.858500@0]- meson-mmc: meson_mmc_irq_thread 2800 sdio: cmd:8
[   11.880714@2]- sdio: new high speed SDIO card at address 0001
[   11.880726@0]- sdio: clock 50000000, 4-bit-bus-width
[   11.880726@0]-  
[   11.881277@0]- meson-mmc: [sdio_reinit] finish
[   11.933889@1]- wireguard: WireGuard 1.0.20210219 loaded. See www.wireguard.com for information.
[   11.933900@1]- wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
[   14.155768@3]- Installing knfsd (copyright (C) 1996 [email protected]).
[   14.204271@0]- Console: switching to colour dummy device 80x25
[   14.207402@3]- proc: unrecognized mount option "hidepid=invisible" or missing value
[   14.839889@1]- mali-utgard d00c0000.mali: set min pp to default 1
[   14.839901@1]- mali-utgard d00c0000.mali: set min clk default to 0
[   14.840196@1]- mali-utgard d00c0000.mali: max clk set 4
[   14.840205@1]- mali-utgard d00c0000.mali: turbo clk set to 5
[   14.860546@1]- gpu cooling register okay with err=0
[   14.863603@3]- gpu core cooling register okay with err=0
[   14.864099@3]- Mali: Mali device driver loaded
[   15.290340@0]- internal phy init
[   15.360893@0]- internal phy init
[   15.378729@0]- meson6-dwmac c9410000.ethernet eth0: fail to init PTP.
[   15.389476@0]- IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.606953@1]- [D]
[   15.606953@1]- 
[   15.606953@1]-      <SCI WIFI DRV INSMOD> 
[   15.606953@1]- 
[   15.606966@1]- 
[   15.606967@1]- [D]************HIF INIT*************
[   15.606971@1]- [I]Driver Ver:[svn]
[   15.606977@1]- [I]Kernel_version: 4.9.255
[   15.635257@3]- [D]prase richv200 firmware! /usr/lib/firmware/ram-fw-9188-new-r1751-enc.bin
[   15.668658@0]- [D]FW0 Ver: 1.5.7.1, size:33088Bytes
[   15.668835@0]- [D]FW1 Ver: 8.9.3.1, size:20176Bytes
[   15.668922@0]- [I]sdio_init !!!
[   15.669561@0]- [I]Class=7
[   15.669582@0]- [I]Vendor ID:2e7
[   15.669587@0]- [I]Device ID:9086
[   15.669591@0]- [I]Function#:1
[   15.669598@0]- [I]func_num:1, vender:0x2e7, device:0x9086, max_blksize:512, cur_blksize:512, state:1
[   15.669809@0]- [I][sdio_ctl_init] 
[   15.669948@0]- [I]00000000d45c8395
[   15.669969@0]- [I]wf_sdio_init start
[   15.669974@0]- [I]sdio_id=0
[   15.669980@0]- 
[   15.669983@0]- [I]func_num:1, vender:0x2e7, device:0x9086, max_blksize:512, cur_blksize:512, state:1
[   15.669991@0]- [I]wf_sdio_init end
[   15.677549@0]- [D]************HIF DEV INSERT*************
[   15.677572@0]- [D]<< Power on >>
[   15.677578@0]- [I][power_on] start
[   15.695703@0]- [I][power_on] success
[   15.695719@0]- [D]wf_power_on success
[   15.695725@0]- [I]old:0xac---0x13
[   15.695905@0]- [I]new:0xac---0x13
[   15.695962@0]- [I]old:0xf8---0x13
[   15.696119@0]- [I]new:0xf8---0x13
[   15.696175@0]- [I]old:0x98---0x8
[   15.696280@0]- [I]new:0x98---0xff
[   15.696338@0]- [I]new:0x1c---0x0
[   15.696437@0]- [I]0x200---0x100000
[   15.696501@0]- [I]0x200---0x100000
[   15.696534@0]- [I][side_road_cfg] cfg sucess
[   15.696656@0]- [D][wf_proc_init] start
[   15.696660@0]- 
[   15.696710@0]- [D]<< create hif tx/rx queue >>
[   15.707091@0]- [D][wf_hif_queue_enable] begin
[   15.707116@0]- [D][wf_hif_queue_enable] end
[   15.707122@0]- [D]<< add nic to hif_node >>
[   15.707127@0]- [D]   node_id    :0
[   15.707138@0]- [D]   hif_type   :2  [1:usb  2:sdio]
[   15.707147@0]- [D]<< ndev register 0>>
[   15.707218@0]- [I]tx_info init
[   15.707616@0]- [I]rx_init init
[   15.708025@0]- [I]start
[   15.708735@0]- [I]fw downloading.....
[   15.708954@2]- [D]firmware download length is 33088
[   15.708967@2]- [D]firmware download buffer size is 512
[   15.708974@2]- [I]fwdownload block number is 68
[   15.709108@1]- [E][sdio_irq_handle] tx dma error!!
[   15.709143@1]- [I]0x210----0x400
[   15.710310@2]- [E][sdio_irq_handle] tx dma error!!
[   15.710355@2]- [I]0x210----0x4400
[   15.710521@2]- [E][sdio_irq_handle] tx dma error!!
[   15.710556@2]- [I]0x210----0x4400
[   15.722278@1]- [I]cal checksum=29431
[   15.722291@1]- [D]my checksum is 0x72f7, fw_len=33088
[   15.919550@1]- proc: unrecognized mount option "hidepid=invisible" or missing value
[   16.395636@0]- wol_reg12[12]==0, error
[   17.420046@0]d meson6-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
[   20.747460@1]- [E]bulk access fw read timeout
[   20.747477@1]- [E]===>wf_fw_download error, exit!!
[   20.747481@1]- [E]===>prv_hardware_init error
[   20.747523@1]- [W][ndev_register:1008]register_netdev error [ret:-1]
[   20.747536@1]- [E][hif_dev_insert] ndev_register nic[0] failed
[   20.747542@1]- [E]hif_dev_insert error
[   20.750254@0]- IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   20.786032@2]- 8021q: 802.1Q VLAN Support v1.8
[   20.828215@1]- Registered IR keymap rc-empty
[   20.828727@1]- input: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0/input4
[   20.832506@2]- rc rc0: meson-ir as /devices/platform/c8100580.meson-ir/rc/rc0
[   20.839335@0]- meson-ir c8100580.meson-ir: AO_RTI_PIN_MUX : 0x109801
[   20.839364@0]- meson-ir c8100580.meson-ir: receiver initialized
[   20.849196@1]- lirc_dev: IR Remote Control driver registered, major 497
[   20.856104@2]- rc rc0: lirc_dev: driver ir-lirc-codec (meson-ir) registered at minor = 0
[   20.856115@2]- IR LIRC bridge handler initialized
[   20.980035@2]- IR NEC protocol handler initialized
[   21.027691@2]- IR RC6 protocol handler initialized
[   62.475508@3]- fb: mem_free_work, free memory: addr:800000
[   84.883607@3]- snd_spdif_dai: enterd aml_spdif_play,set_clock:4,sample_rate=4
[   84.883629@3]- snd_spdif_dai: set 958 audio clk div 2
[   84.923379@3]- audio_dsp: buf=0
[   84.923390@3]- audio_dsp: IEC958_mode_raw=0
[   84.935240@3]- snd_spdif_dai: set normal 512 fs /4 fs
[   84.935251@3]- snd_spdif_dai: set 958 audio clk div 4
[   84.935673@0]- snd_spdif_dai: set normal 512 fs /4 fs
[   85.177188@0]- snd_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
[   85.177231@0]- snd_spdif_dai: set 958 audio clk div 2
[   85.228070@2]- audio_dsp: buf=0
[   85.228088@2]- audio_dsp: IEC958_mode_raw=0
[   85.239408@2]- snd_spdif_dai: set normal 512 fs /4 fs
[   85.239482@2]- snd_spdif_dai: set 958 audio clk div 4
[   85.239807@2]- snd_spdif_dai: set normal 512 fs /4 fs
[   85.243411@0]- fb: osd_release now.index=0,open_count=1
[   85.249748@1]- snd_spdif_dai: enterd aml_spdif_play,set_clock:5,sample_rate=4
[   85.249775@1]- snd_spdif_dai: set 958 audio clk div 2
[   85.278449@3]- vout: vmode set to custombuilt
[   85.278498@3]- vout: error: no matched vout mode, exit
[   85.291513@3]- audio_dsp: buf=0
[   85.291519@3]- audio_dsp: IEC958_mode_raw=0
[   85.299105@3]- snd_spdif_dai: set normal 512 fs /4 fs
[   85.299114@3]- snd_spdif_dai: set 958 audio clk div 4
[   85.299401@3]- snd_spdif_dai: set normal 512 fs /4 fs
[   87.471854@3]- vout: vmode set to custombuilt
[   87.471895@3]- vout: error: no matched vout mode, exit
[   90.725474@2]- cectx c810023c.aocec: CEC framework ctrl enabled
[   96.109514@1]- Now can use cma, free:6143, wm:6144
[  316.760187@2]d fb: update_table_item overflow!vsync_cnt=1, rdma_cnt=1