Leslie-Alexandre DENIS eagleusb

Overview

The Sierra MC7355 can run configurations for several North American carriers. These cards are easy to find on eBay and notable for their support for the Sprint LTE network. Unless you're luck out, you may find you need to flash a new carrier configuration onto the card you purchased before using it.

Notes

These procedures are specific to the setup I had to perform this on. Most notably, the only system I had with a mini-PCI-e slot was the target pfSense system, a PCengines APU1d with no VGA port (serial console only). If you're able to obtain a

The introduction to Reactive Programming you've been missing

(by @andrestaltz)

This tutorial as a series of videos

If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.

	#!/boot/bzImage

	# Linux kernel userspace initialization code, translated to bash
	# (Minus floppy disk handling, because seriously, it's 2017.)
	# Not 100% accurate, but gives you a good idea of how kernel init works
	# GPLv2, Copyright 2017 Hector Martin <[email protected]>
	# Based on Linux 4.10-rc2.

	# Note: pretend chroot is a builtin and affects the current process
	# Note: kernel actually uses major/minor device numbers instead of device name

	#!/bin/bash

	set -u
	set -e

	set -o pipefail

	export PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

	cat <<'EOF' > /etc/modprobe.d/blacklist-ipv6.conf

	---
	# ^^^ YAML documents must begin with the document separator "---"
	#
	#### Example docblock, I like to put a descriptive comment at the top of my
	#### playbooks.
	#
	# Overview: Playbook to bootstrap a new host for configuration management.
	# Applies to: production
	# Description:
	# Ensures that a host is configured for management with Ansible.