Install v2ray on Bridge:(Ubuntu +18 via systemd) - Upstream (Ubuntu +18/CentOS +7 via docker)

README.md

At the beginning run this command on your internet server (foreign):

برای شروع میتوانید یک دایرکتوری در سرور خارجی ایجاد کنید و وارد آن شوید.

It's better to make a new directory and cd into:

mkdir vmess
cd vmess

سپس دستور زیر را در ترمینال سرور خارجی خود کپی کنید

1️⃣ sudo curl -s https://gist.githubusercontent.com/mahmoud-eskandari/960899f3494a1bffa1a29631dbaf0aee/raw/3609b30f4dd47f17751a3b88d490765795056632/install-upstream.sh | bash -s 2083

[ OR ]

If your internal server hasn't good internet connectivity you can use Iranian mirror: اگر اتفاقی نیفتاد ممکن است دسترسی سرور شما با اینترنت قطع شده باشد پس میتوانید از دستور زیر به جای آن استفاده کنید که یک کپی در سرورهای ایران است. توجه کنید اگر هر کدام اجرا شد و موفقیت آمیز بود دیگر نیازی به اجرای آن یکی ندارید. کپی هم هستند صرفا!

sudo curl -s https://v2rayv2ray.s3.ir-thr-at1.arvanstorage.com/install-upstream.sh | bash -s 2083

After successful installation it returns a message like this: Run this command on your bridge(interanet) server:

بعد از اینکه مرحله ۱ را انجام دادید در انتها شبیه اسکریپت زیر یک کد به شما میدهد که میبایست آنرا کپی کنید و در سرور ایران خود اجرا کنید.

2️⃣ curl -s https://gist.github....install-bridge.sh | bash -s x.x.x.x 2083 xxxxxxxx-xxx-xxx-xxxx-xxxxxxxxxxx

اگر این اجرا موفقیت آمیز بود یک پیغام به شما نشان میدهد و کانکشنهای مختلف برای اتصال به تلگرام vmess و ... را چاپ میکند. Finally run this command on your bridge(internal) server!

install-bridge.sh

#!/bin/bash

if [ "$EUID" -ne 0 ]
  then echo "Please run as root user or run with sudo"
  exit
fi


cd /tmp/
rm -rf ./v2ray && mkdir ./v2ray
cd ./v2ray

## x86_64
## Source: https://github.com/v2fly/v2ray-core/releases/tag/v4.31.0

curl -L https://v2rayv2ray.s3.ir-thr-at1.arvanstorage.com/v2ray-$(uname -m).tar.gz -o v2ray.tar.gz
tar -xvf v2ray.tar.gz

## make directories
rm -rf /var/log/v2ray/ && mkdir -p /var/log/v2ray/
chown -R nobody /var/log/v2ray
rm -rf /usr/local/share/v2ray/ && mkdir -p /usr/local/share/v2ray/
chown -R nobody /usr/local/share/v2ray/
rm -rf /usr/local/etc/v2ray/ && mkdir -p /usr/local/etc/v2ray/


## Get an UUID
UUID=$(cat /proc/sys/kernel/random/uuid)
if [ $? -ne 0 ]
  then 
  UUID= $(curl -s "https://www.uuidgenerator.net/api/version4" )
fi

SSPASS=$(tr -dc A-Za-z0-9 </dev/urandom | head -c 13 )
SOPASS=$(tr -dc A-Za-z0-9 </dev/urandom | head -c 8 )
MTPORTO=$(tr -dc A-Za-z0-9 </dev/urandom | head -c 32 | md5sum | head -c 32)

## Write config file
cat <<EOF > /usr/local/etc/v2ray/config.json
{
  "log": {
    "access": "/var/log/v2ray/access.log",
    "error": "/var/log/v2ray/error.log",
    "loglevel": "warning"
  },
  "inbounds": [
    {
      "listen": "0.0.0.0",
      "port": 9007,
      "protocol": "socks",
      "settings": {
        "auth": "password",
        "accounts": [
            {
            "user": "user",
            "pass": "$SOPASS"
            }
        ],
        "udp": true
      }
    },
    {
        "port": 9006,
        "protocol": "mtproto",
        "settings": {
            "users": [{"secret": "$MTPORTO"}]
        }
    },
    { 
      "listen": "0.0.0.0",
      "port": 9008,
      "protocol": "shadowsocks",
      "settings": { 
        "password": "$SSPASS",
        "timeout":60,
        "method":"chacha20-ietf-poly1305"
      }
    },
    {
      "listen": "0.0.0.0",
      "port": 9009,
      "protocol": "vmess",
      "settings": {
        "clients": [
          {
            "id": "$UUID",
            "alterId": 0,
            "security": "auto"
          }
        ]
      }
    }
  ],
  "outbound": {
    "tag": "proxy",
    "protocol": "vmess",
    "settings": {
      "vnext": [
        {
          "address": "$1",
          "port": $2,
          "users": [
            {
              "id": "$3",
              "alterId": 0,
              "security": "chacha20-poly1305"
            }
          ]
        }
      ]
    },
    "streamSettings": {
      "network": "ws"
    },
    "mux": {
      "enabled": true
    }
  },
  "inboundDetour": null,
  "outboundDetour": [
    {
      "protocol": "freedom",
      "tag": "freedom"
    },
    {
      "protocol": "blackhole",
      "tag": "blackhole"
    }
  ],
  "dns": {
    "servers": [
      "8.8.8.8",
      "8.8.4.4",
      "localhost"
    ]
  },
  "routing": {
    "domainStrategy": "IPIfNonMatch",
    "settings": {
      "rules": [
        {
          "type": "field",
          "outboundTag": "blackhole",
          "ip": [
            "geoip:private"
          ]
        },
        {
          "type": "field",
          "outboundTag": "direct",
          "ip": [
            "geoip:ir"
          ],
          "domain": [
            "regexp:^.+\\\\.ir$",
            "ext:iran.dat:ir"
          ]
        }
      ]
    }
  }
}}

EOF





cp ./systemd/system/v2ray.service /etc/systemd/system/
cp ./systemd/system/[email protected] /etc/systemd/system/


## create log files
touch /var/log/v2ray/access.log
touch /var/log/v2ray/error.log

## copy binaries
cp ./v2ray /usr/local/bin/v2ray
cp ./v2ctl /usr/local/bin/v2ctl
chmod +x /usr/local/bin/v2ray
chmod +x /usr/local/bin/v2ctl

## copy dat files
cp ./iran.dat /usr/local/share/v2ray/iran.dat
cp ./geosite.dat /usr/local/share/v2ray/geosite.dat
cp ./geoip.dat /usr/local/share/v2ray/geoip.dat

systemctl daemon-reload
systemctl enable v2ray
systemctl restart v2ray

cd /tmp/
rm -rf ./v2ray

IP=$(curl -s "https://api.ipify.org/" )

## Fallback interanet
if [ "$IP" = ""]
  then 
  IP=$(curl -s "https://dzy.ir/ip.txt" )
fi

VMESS=$(echo "{\"add\":\"$IP\",\"aid\":\"0\",\"host\":\"\",\"id\":\"$UUID\",\"net\":\"tcp\",\"path\":\"\",\"port\":\"9009\",\"ps\":\"Iran-$IP\",\"scy\":\"auto\",\"sni\":\"\",\"tls\":\"\",\"type\":\"none\",\"v\":\"2\"}" | base64)
SHADOW=$(echo "chacha20-ietf-poly1305:$SSPASS" | base64)
cat <<EOF > ./v2ray-install.log

Output saved into >>>
/tmp/v2ray-install.log


Your Internal IP is: $IP , by api.ipify.org
If your ip is not correct (because of proxy affect etc.) change it manualy in connection configs.

===============================
ShadowSoocks Connection:
ss://$SHADOW@$IP:9008#Iran-$IP

Password:$SSPASS
Port:9008


===============================
V2ray vmess Connection:
vmess://$VMESS

Password:$UUID
Port:9009

===============================
Telegram Socks:
https://t.me/socks?server=$IP&port=9007&user=user&pass=$SOPASS

Telegram MtProto:
https://t.me/proxy?server=$IP&port=9006&secret=$MTPORTO

===============================
Socks5:
IP: $IP
Port: 9007
Username: user
Password: $SOPASS

===============================

EOF

cat ./v2ray-install.log

echo "For check v2ray helth run: systemctl status v2ray"

install-upstream.sh

#!/bin/bash

if [ "$EUID" -ne 0 ]
  then echo "Please run as root user or run with sudo"
  exit
fi

## Check for docker
docker --version
if [ $? -ne 0 ]
  then
    curl -fsSL https://get.docker.com | sh
fi

## Check for docker compose
docker-compose --version
if [ $? -ne 0 ]
  then
    curl -L "https://github.com/docker/compose/releases/download/$(curl --silent "https://api.github.com/repos/docker/compose/releases/latest" | grep -Po '"tag_name": "\K.*?(?=")')/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose
    chmod +x /usr/local/bin/docker-compose
    ln -s /usr/local/bin/docker-compose /usr/bin/docker-compose
fi

rm -f docker-compose.yml
rm -f config.json
rm -rf log
mkdir log


## Get an UUID
UUID=$(cat /proc/sys/kernel/random/uuid)
if [ $? -ne 0 ]
  then 
  UUID= $(curl -s "https://www.uuidgenerator.net/api/version4" )
fi

## Write compose file
cat <<EOF > ./docker-compose.yml
version: "3"
services:
  v2ray:
    image: v2fly/v2fly-core:latest
    container_name: v2ray
    restart: always
    ports:
      - $1:$1
    volumes:
      - ./config.json:/etc/v2ray/config.json
      - ./log/:/var/log/v2ray/
EOF

## Write config file
cat <<EOF > ./config.json
{
  "log": {
    "access": "/var/log/v2ray/access.log",
    "error": "/var/log/v2ray/error.log",
    "loglevel": "warning"
  },
  "inbound": {
    "listen": "0.0.0.0",
    "port": $1,
    "protocol": "vmess",
    "settings": {
      "clients": [
        {
          "id": "$UUID",
          "alterId": 0,
          "security": "chacha20-poly1305"
        }
      ]
    },
    "streamSettings": {
      "network": "ws"
    }
  },
  "outbound": {
    "protocol": "freedom"
  },
  "inboundDetour": null,
  "outboundDetour": [
    {
      "protocol": "blackhole",
      "tag": "blackhole"
    }
  ],
  "routing": {
    "domainStrategy": "IPIfNonMatch",
    "settings": {
      "rules": [
        {
          "type": "field",
          "outboundTag": "blackhole",
          "ip": [
            "geoip:private"
          ]
        }
      ]
    }
  }
}
EOF

docker-compose up -d

IP=$(curl -s "https://api.ipify.org/" )

cat <<EOF > ./bridge-install-by-curl.sh
  ## Run this command on your bridge(interanet) server:
  sudo curl -s https://gist.githubusercontent.com/mahmoud-eskandari/960899f3494a1bffa1a29631dbaf0aee/raw/5384ebaa2b7c71179aff6a8dd49c59fe9e54a383/install-bridge.sh | bash -s $IP $1 $UUID
  
  ## If your internal server hasn't access to foreign internet you can also use internal mirror:
   sudo curl -s https://v2rayv2ray.s3.ir-thr-at1.arvanstorage.com/run.sh | bash -s $IP $1 $UUID
EOF

cat ./bridge-install-by-curl.sh