Kingroon KP3S GCode for Cura

kingroon_kp3s_gcode.txt

Start G-code:


; KP3S Custom Start G-code
G92 E0 ; Reset Extruder
G28 ; Home all axes
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X20 Y2.1 Z0.3 F5000.0 ; Move to start position
G1 X150 Y2.1 Z0.3 F1500.0 E15 ; Draw the first line
G1 X150 Y2.4 Z0.3 F5000.0 ; Move to side a little
G1 X20 Y2.4 Z0.3 F1500.0 E30 ; Draw the second line
G92 E0 ; Reset Extruder
G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed
G1 X20 Y5 Z0.3 F5000.0 ; Move over to prevent blob squish



End G-code:


; KP3S Custom End G-code
G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning

G1 X5 Y170 ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed

M84 X Y E ;Disable all steppers but Z ;If T8x2 add Z
2 Comments