Change your Raspberry Pi scrolling to Natural Scrolling - NEW Bookworm hack!

bookworm.md

Bookworm OS (Debian 12)

While this method is indeed a bit hacky, it does work! Perhaps in due course wayfire will make this a bit more straight forward...

🚨 🚨 For some reason wayfire will (occasionally) add back in the <min>0.0</min> line and will also remove the <max>1.0</max> (see Step 2. If you notice natural scroll not working, this is most likely the cause. Just repeat this step and sudo reboot... hey I said it was hacky 🤷🏻‍♂️

Step 1

vi ~/.config/wayfire.ini

After the [input] section add mouse_scroll_speed=-1.0 (negative 1)

Step 2

sudo vi /usr/share/wayfire/metadata/input.xml

Delete line 112 <min>0.0</min> from the mouse_scroll_speed section

Step 3

Restart Pi and enjoy that natrually scrolling goodness!

---

VNC Viewer Issue

I've observed that while connected via VNC Viewer, the scroll direction is reversed... again. I haven't figured out how to resolve this minor annoyance, but when I do I'll update the gist. I'm guessing there is an option somewhere in the Expert tab when viewing the connection properties. If YOU know of a fix, please enlighten me 😁

bullseye.md

Bullseye OS (Debian 11)

gsettings set org.gnome.desktop.peripherals.mouse natural-scroll true

Thanks @makouski for this 🙌🏻

old-os.md

Older OS (Debian 10 or below?)

Via the Terminal, type

cd /usr/share/X11/xorg.conf.d
sudo nano 40-libinput.conf

Add to following line to the BOTTOM of the FIRST Section "InputClass"

Option "NaturalScrolling" "true"

Here is a visual representation

Once you're finished, write to the file and then exit.

Restart your Pi

Enjoy that natural scrolling goodness!

Cheers

@makouski Thank you! Worked for me in Bullseye, no reboot necessary.

@eli9000 Hi, maybe it's worth to update doc with the script for Bullseye given by @frenchfaso ? This is the first google result for raspberry pi natural scrolling :)

@frenchfaso, I have the same problem: updating 40-libinput.conf did not work in bullseye but it did work in buster. this is how I enabled natural scrolling in bullseye: gsettings set org.gnome.desktop.peripherals.mouse natural-scroll true

@bzareba good idea, I will do so!

Updated added for Bookworm (Debian 12) 🥳

See bookworm.md