Epson xp-445 bootup

gistfile1.txt

BooSt for SoC09S 1.0.3 (2008/08/01)
Start ARM1136JF-S ... RTOS
Start ARM926EJ-S  ... Linux

MiLL  for Soc09S 2.0.0 (2011/09/15)
Uncomp.done
Linux version 2.6.35.8-arm1 (gcc version 4.5.1 (epson-20130312) ) #1 Wed Aug 2 16:05:55 JST 2017
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
CPU: VIVT data cache, VIVT instruction cache
Machine: ARM-EPSON09
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 7874
Kernel command line: root=/dev/mtdblock1 console=ttyS0,115200 mem=31M cn=0 mtdparts=m25p80:1152k@0x00110000(kernel_CAT11),1280k@0x00230000(rootfs),3776k@0x00370000(userfs1),512k@0x00720000(userfs2) init=/root/PreBoot
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 31MB = 31MB total
Memory: 28708k/28708k available, 3036k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xc2000000 - 0xd0000000   ( 224 MB)
    lowmem  : 0xc0000000 - 0xc1f00000   (  31 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc001c000   (  80 kB)
      .text : 0xc001c000 - 0xc0286000   (2472 kB)
      .data : 0xc0286000 - 0xc029bfc0   (  88 kB)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:128
<EP> epson09_gicu_dist_init base = 0xd0001000
<EP> epson09_itim2_time_init:start
<EP> timer_reload=75000
<EP> epson09_itim2_time_init:complete
Console: colour dummy device 80x30
Calibrating delay loop... 119.60 BogoMIPS (lpj=598016)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
registed epson09-ehci devices, 
registed mfp09_devices, 
clk_init
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
JFFS2 version 2.2. © 2001-2006 Red Hat, Inc.
msgmni has been set to 56
io scheduler noop registered (default)
SuperH SCI(F) driver initialized
sh-sci.0: ttyS0 at MMIO 0xe0816000 (irq = 116) is a scif
console [ttyS0] enabled
loop: module loaded
called epson_sflu3_init
called epson_sflu3_probe, master = c1832300, sflu3_data = c18323b8
sflu3 : master->transfer is transfer with accesscontrol 
sflu3 : MUST WRITE dicimal 1 to epson_flashrom_right_ctrl_while_lock, when system terminate
m25p80 spi0.0: non-JEDEC variant of n25q064
m25p80 spi0.0: n25q064 (8192 Kbytes)
4 cmdlinepart partitions found on MTD device m25p80
Creating 4 MTD partitions on "m25p80":
0x000000110000-0x000000230000 : "kernel_CAT11"
0x000000230000-0x000000370000 : "rootfs"
0x000000370000-0x000000720000 : "userfs1"
0x000000720000-0x0000007a0000 : "userfs2"
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
epson09-ehci epson09-ehci.0: EPSON09 EHCI Host Controller
epson09-ehci epson09-ehci.0: new USB bus registered, assigned bus number 1
epson09-ehci epson09-ehci.0: irq 51, io mem 0xd0802000
epson09-ehci epson09-ehci.0: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-vbuspower: Initializing
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
NET: Registered protocol family 15
VFP support v0.3: not present
VFS: Mounted root (squashfs filesystem) readonly on device 31:1.
Freeing init memory: 80K
usb 1-1: new high speed USB device using epson09-ehci and address 2
PreBoot start
version information
System 20 
Apprication 20 
 
Starting NWDomain...
Wed Jan  1 12:00:00 GMT 2014
Load modules .......
EPIDC:EPSON Inter-domain communication driver (SOC09S) ver.2.16 build [ Jun  9 2014 13:20:36 ]
<1>EPIDC:Copyright (C) SEIKO EPSON CORPORATION 2007-2009.
EPIDC:remap_area(nocache)  phy_addr[xe0c00000] -> map_addr[xc20bc000]
EPIDC:remap_area2(cached)  phy_addr[x42003000] -> map_addr[xc2200000]
EPIDC:remap_area(nocache)  phy_addr[xf0080100] -> map_addr[xc20c0100]
EPIDC:request_irq(32) = 0

Starting Planet ...
****** PNPSMStartMain() START!! ******
[PLANET] <ILLEGAL>:D4_GetEpsonHelloInfo(898):data too small. *lpLen=1 
NVRAMNCL2        size/max = 75/128
NVRAMNCL         size/max = 33077/49152
NVRAMETERNAL     size/max = 152/2048
Successfully initialized wpa_supplicant
Vendor 0xa5c ID 0xbd1e
usb_set_debug: Setting debugging level to 255 (on)
claiming interface 0
Found device: vend=0xa5c prod=0xbd1e
File Length: 413899
ID : Chip 0xa887 Rev 0x2RamSize 458752 RemapBase 0x60000000 BoardType 0 BoardRev 0
start
rdl.state 0x4
elapsed download time 0.300010
P:  Vendor=0a5c ProdID=0bdc Rev= 0.01
 up interface (wlan0) 
 up interface (wlan0) 
WcifFirmControl.cpp 1264  Not Wi-Fi Direct Mode
 up interface (wlan0) 
 up interface (wlan0) 
WLAN Firmware Version : A1.0720.0000
AOSS Firmware Version : 2.7-1.20

[PLANET] <ILLEGAL>:psmRSCGetBool(874):psmRSCGetBool(FTPD,FTPD_PS_SUPPORT) returns error code(2)
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
This system is not have RTC, no change SystemTime
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
CFileSystem::ReadFile  Not open 
[PLANET] <ILLEGAL>:Deactivate(216):PNNWL_setPowerOff(eth0) failed.
[PLANET] <ILLEGAL>:psmRSCGetBool(874):psmRSCGetBool(FTPD,FTPD_PS_SUPPORT) returns error code(2)
Launching Console Menu.
<<Current: WLAN mode>>
Input     'r' : Reboot.
          'R' : Reset settings and reboot.
          'a' : display current IP address.
          'm' : display current MAC address.
          'f' : show /proc/meminfo.
          '@' : run shell command
          'l' : List current module status
          's' : statussheet output 
          '1' : wcif debug mode 
          'y' : management service start trigger 
[WCIF:WcifTask.cpp(4363)] <ILLEGAL> ClearManualCheckFile: remove error 2
stJoinInfo eDot11Mode=11
[PLANET] <ILLEGAL>:HTTPReceiveHeader(1182):ERROR
[PLANET] <ILLEGAL>:HTTPSRecvTCPData(1375):_ERROR
[PLANET] <ILLEGAL>:HTTPReceiveHeader(1182):ERROR
[PLANET] <ILLEGAL>:ESWRecv(2511):ERROR : SSL_read returns error (0) nErrno = 6
[PLANET] <ILLEGAL>:ESWRecv(2528):ERROR :SSL_read/SSL_peak recv size 0
[PLANET] <ILLEGAL>:HTTPReceive(1855):ERROR
[PLANET] <ILLEGAL>:HTTPReceiveHeader(1176):ERROR