Created
October 2, 2023 18:11
-
-
Save enkiusz/482fab68ef7a630c8cfaad6f13f63919 to your computer and use it in GitHub Desktop.
DNS-320L Buildroot 2023.08-650-gc913d310e5 boot log
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
** MARVELL BOARD: DB-88F6702A-BP LE | |
U-Boot 1.1.4 (Aug 22 2012 - 17:06:54) Marvell version: 3.6.0.DNS-320L.01 | |
U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00 | |
Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz | |
SysClock = 400Mhz , TClock = 166Mhz | |
DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 | |
DRAM CS[0] base 0x00000000 size 256MB | |
DRAM Total size 256MB 16bit width | |
Addresses 8M - 0M are saved for the U-Boot usage. | |
Mem malloc Initialization (8M - 7M): Done | |
NAND:128 MB | |
Flash: 0 kB | |
CPU : Marvell Feroceon (Rev 1) | |
Streaming disabled | |
Write allocate disabled | |
USB 0: host mode | |
PEX 0: interface detected no Link. | |
Net: egiga0 [PRIME] | |
Hit any key to stop autoboot: 0 | |
BOOTP broadcast 1 | |
*** Unhandled DHCP Option in OFFER/ACK: 28 | |
*** Unhandled DHCP Option in OFFER/ACK: 28 | |
DHCP client bound to address 10.1.0.10 | |
Using egiga0 device | |
TFTP from server 10.1.0.1; our IP address is 10.1.0.10 | |
Filename 'uImage.kirkwood-dns320l'. | |
Load address: 0xa00000 | |
Loading: ################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
############################### | |
done | |
Bytes transferred = 5481426 (53a3d2 hex) | |
Using egiga0 device | |
TFTP from server 10.1.0.1; our IP address is 10.1.0.10 | |
Filename 'rootfs.cpio.uboot'. | |
Load address: 0x2000000 | |
Loading: ################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
################################################################# | |
########## | |
done | |
Bytes transferred = 1710475 (1a198b hex) | |
## Booting image at 00a00000 ... | |
Image Name: Linux-6.5.5 | |
Created: 2023-10-02 18:06:40 UTC | |
Image Type: ARM Linux Kernel Image (uncompressed) | |
Data Size: 5481362 Bytes = 5.2 MB | |
Load Address: 00008000 | |
Entry Point: 00008000 | |
Verifying Checksum ... OK | |
OK | |
## Loading Ramdisk Image at 02000000 ... | |
Image Name: | |
Created: 2023-10-02 18:06:42 UTC | |
Image Type: ARM Linux RAMDisk Image (uncompressed) | |
Data Size: 1710411 Bytes = 1.6 MB | |
Load Address: 00000000 | |
Entry Point: 00000000 | |
Verifying Checksum ... OK | |
Starting kernel ... | |
Booting Linux on physical CPU 0x0 | |
Linux version 6.5.5 (enki@newton) (arm-buildroot-linux-gnueabi-gcc.br_real (Buildroot 2023.08-650-gc913d310e5) 12.3.0, GNU ld (GNU Binutils) 2.40) #1 PREEMPT Mon Oct 2 20:06:28 CEST 2023 | |
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f | |
CPU: VIVT data cache, VIVT instruction cache | |
OF: fdt: Machine model: D-Link DNS-320L | |
Memory policy: Data cache writeback | |
Zone ranges: | |
Normal [mem 0x0000000000000000-0x000000000fffffff] | |
HighMem empty | |
Movable zone start for each node | |
Early memory node ranges | |
node 0: [mem 0x0000000000000000-0x000000000fffffff] | |
Initmem setup node 0 [mem 0x0000000000000000-0x000000000fffffff] | |
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | |
pcpu-alloc: [0] 0 | |
Kernel command line: console=ttyS0,115200 debug | |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear) | |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear) | |
Built 1 zonelists, mobility grouping on. Total pages: 65024 | |
mem auto-init: stack:all(zero), heap alloc:off, heap free:off | |
Memory: 245092K/262144K available (8060K kernel code, 1867K rwdata, 1980K rodata, 236K init, 661K bss, 17052K reserved, 0K cma-reserved, 0K highmem) | |
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
rcu: Preemptible hierarchical RCU implementation. | |
rcu: RCU event tracing is enabled. | |
Trampoline variant of Tasks RCU enabled. | |
rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns | |
sched_clock: 32 bits at 167MHz, resolution 6ns, wraps every 12884901885ns | |
Switching to timer-based delay loop, resolution 6ns | |
Console: colour dummy device 80x30 | |
Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666) | |
CPU: Testing write buffer coherency: ok | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
RCU Tasks: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1. | |
Setting up static identity map for 0x8200 - 0x8258 | |
mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3 | |
rcu: Hierarchical SRCU implementation. | |
rcu: Max phase no-delay instances is 1000. | |
devtmpfs: initialized | |
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
futex hash table entries: 256 (order: -1, 3072 bytes, linear) | |
pinctrl core: initialized pinctrl subsystem | |
NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
DMA: preallocated 256 KiB pool for atomic coherent allocations | |
thermal_sys: Registered thermal governor 'step_wise' | |
cpuidle: using governor menu | |
Feroceon L2: Enabling L2 | |
Feroceon L2: Cache support initialised. | |
platform f1010000.pin-controller: Fixed dependency cycle(s) with /ocp@f1000000/pin-controller@10000/pmx-button-power | |
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. | |
SCSI subsystem initialized | |
libata version 3.00 loaded. | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
pps_core: LinuxPPS API ver. 1 registered | |
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
PTP clock support registered | |
Advanced Linux Sound Architecture Driver Initialized. | |
vgaarb: loaded | |
clocksource: Switched to clocksource orion_clocksource | |
NET: Registered PF_INET protocol family | |
IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear) | |
tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) | |
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear) | |
TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear) | |
TCP: Hash tables configured (established 2048 bind 2048) | |
UDP hash table entries: 256 (order: 0, 4096 bytes, linear) | |
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) | |
NET: Registered PF_UNIX/PF_LOCAL protocol family | |
RPC: Registered named UNIX socket transport module. | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp-with-tls transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
PCI: CLS 0 bytes, default 32 | |
Unpacking initramfs... | |
Initialise system trusted keyrings | |
workingset: timestamp_bits=30 max_order=16 bucket_order=0 | |
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. | |
Key type asymmetric registered | |
Asymmetric key parser 'x509' registered | |
io scheduler mq-deadline registered | |
io scheduler kyber registered | |
io scheduler bfq registered | |
kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver | |
gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
mv_xor f1060800.xor: Marvell shared XOR driver | |
mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) | |
mv_xor f1060900.xor: Marvell shared XOR driver | |
mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr ) | |
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled | |
printk: console [ttyS0] disabled | |
f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 27, base_baud = 10416666) is a 16550A | |
printk: console [ttyS0] enabled | |
Freeing initrd memory: 1672K | |
f1012100.serial: ttyS1 at MMIO 0xf1012100 (irq = 28, base_baud = 10416666) is a 16550A | |
loop: module loaded | |
sata_mv f1080000.sata: version 1.28 | |
sata_mv f1080000.sata: slots 32 ports 2 | |
scsi host0: sata_mv | |
scsi host1: sata_mv | |
ata1: SATA max UDMA/133 irq 29 | |
ata2: SATA max UDMA/133 irq 29 | |
nand: device found, Manufacturer ID: 0xad, Chip ID: 0xf1 | |
nand: Hynix H27U1G8F2BTR-BC | |
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 | |
Scanning device for bad blocks | |
7 fixed-partitions partitions found on MTD device orion_nand | |
Creating 7 MTD partitions on "orion_nand": | |
0x000000000000-0x000000100000 : "u-boot" | |
0x000000100000-0x000000600000 : "uImage" | |
0x000000600000-0x000000b00000 : "ramdisk" | |
0x000000b00000-0x000006f00000 : "image" | |
0x000006f00000-0x000007900000 : "mini firmware" | |
0x000007900000-0x000007e00000 : "config" | |
0x000007e00000-0x000008000000 : "my-dlink" | |
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4 | |
mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:50:43:00:02:02 | |
libertas_sdio: Libertas SDIO driver | |
libertas_sdio: Copyright Pierre Ossman | |
orion-ehci f1050000.ehci: EHCI Host Controller | |
orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1 | |
orion-ehci f1050000.ehci: irq 32, io mem 0xf1050000 | |
orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00 | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 1 port detected | |
usbcore: registered new interface driver usb-storage | |
usbcore: registered new interface driver ums-datafab | |
usbcore: registered new interface driver ums-freecom | |
usbcore: registered new interface driver ums-jumpshot | |
usbcore: registered new interface driver ums-sddr09 | |
usbcore: registered new interface driver ums-sddr55 | |
ata1: SATA link down (SStatus 0 SControl F300) | |
ata2: SATA link down (SStatus 0 SControl F300) | |
rtc-mv f1010300.rtc: internal RTC not ticking | |
i2c_dev: i2c /dev entries driver | |
orion_wdt: Initial timeout 25 sec | |
marvell-cesa f1030000.crypto: CESA device successfully registered | |
usbcore: registered new interface driver usbhid | |
usbhid: USB HID core driver | |
NET: Registered PF_PACKET protocol family | |
lib80211: common routines for IEEE802.11 drivers | |
lib80211_crypt: registered algorithm 'NULL' | |
Loading compiled-in X.509 certificates | |
input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 | |
cfg80211: failed to load regulatory.db | |
clk: Disabling unused clocks | |
ALSA device list: | |
No soundcards found. | |
Freeing unused kernel image (initmem) memory: 236K | |
Kernel memory protection not selected by kernel config. | |
Run /init as init process | |
with arguments: | |
/init | |
with environment: | |
HOME=/ | |
TERM=linux | |
Saving 256 bits of non-creditable seed for next boot | |
Starting syslogd: OK | |
Starting klogd: OK | |
Running sysctl: OK | |
Starting network: mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, half duplex, flow control disabled | |
mv643xx_eth_port mv643xx_eth_port.0 eth0: link down | |
udhcpc: started, v1.36.1 | |
udhcpc: broadcasting discover | |
mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 100 Mb/s, half duplex, flow control disabled | |
udhcpc: no lease, forking to background | |
OK | |
Starting dns320l-daemon: OK | |
Welcome to Buildroot | |
buildroot login: root | |
# platform regulators:regulator@1: deferred probe pending | |
# cat /etc/os-release | |
NAME=Buildroot | |
VERSION=2023.08-650-gc913d310e5 | |
ID=buildroot | |
VERSION_ID=2023.11-git | |
PRETTY_NAME="Buildroot 2023.11-git" | |
# uname -a | |
Linux buildroot 6.5.5 #1 PREEMPT Mon Oct 2 20:06:28 CEST 2023 armv5tel GNU/Linux | |
# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment