Skip to content

Instantly share code, notes, and snippets.

@enkiusz

enkiusz/hdd-WDC WD800JD-75MSA3-WD-WMAM9KX11133-80GB-smartdata

Last active December 30, 2017 01:04
Show Gist options
  • Save enkiusz/d8dc65003205e8d6ec298cd6eddeb3ef to your computer and use it in GitHub Desktop.
Save enkiusz/d8dc65003205e8d6ec298cd6eddeb3ef to your computer and use it in GitHub Desktop.
Download ZIP
Raw
hdd-WDC WD800JD-75MSA3-WD-WMAM9KX11133-80GB-smartdata
smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.12.5-gentoo-newton] (local build)
Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA
Device Model: WDC WD800JD-75MSA3
Serial Number: WD-WMAM9KX11133
Firmware Version: 10.01E04
User Capacity: 80,000,000,000 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Fri Dec 29 16:25:41 2017 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 128 (quiet), recommended: 128
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron]
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2460) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 33) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 200 200 051 - 0
3 Spin_Up_Time PO---- 166 163 021 - 2658
4 Start_Stop_Count -O--CK 099 099 000 - 1546
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate POSR-- 200 200 051 - 0
9 Power_On_Hours -O--CK 065 065 000 - 25950
10 Spin_Retry_Count PO--C- 100 100 051 - 0
11 Calibration_Retry_Count -O--C- 100 100 051 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1501
190 Airflow_Temperature_Cel -O---K 071 044 045 Past 29
194 Temperature_Celsius -O---K 114 087 000 - 29
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--C- 200 200 000 - 0
198 Offline_Uncorrectable ----C- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
200 Multi_Zone_Error_Rate P--R-- 200 200 051 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb7 GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: SMART Off-line Data Collection executing in background (4)
Current Temperature: 33 Celsius
Power Cycle Max Temperature: 33 Celsius
Lifetime Max Temperature: 58 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/65 Celsius
Min/Max Temperature Limit: 1/70 Celsius
Temperature History Size (Index): 128 (109)
Index Estimated Time Temperature Celsius
110 2017-12-29 14:18 33 **************
... ..( 72 skipped). .. **************
55 2017-12-29 15:31 33 **************
56 2017-12-29 15:32 ? -
57 2017-12-29 15:33 33 **************
58 2017-12-29 15:34 29 **********
59 2017-12-29 15:35 32 *************
60 2017-12-29 15:36 29 **********
61 2017-12-29 15:37 30 ***********
62 2017-12-29 15:38 28 *********
63 2017-12-29 15:39 29 **********
... ..( 2 skipped). .. **********
66 2017-12-29 15:42 29 **********
67 2017-12-29 15:43 30 ***********
68 2017-12-29 15:44 31 ************
69 2017-12-29 15:45 33 **************
70 2017-12-29 15:46 33 **************
71 2017-12-29 15:47 34 ***************
72 2017-12-29 15:48 33 **************
... ..( 6 skipped). .. **************
79 2017-12-29 15:55 33 **************
80 2017-12-29 15:56 ? -
81 2017-12-29 15:57 33 **************
... ..( 2 skipped). .. **************
84 2017-12-29 16:00 33 **************
85 2017-12-29 16:01 34 ***************
86 2017-12-29 16:02 ? -
87 2017-12-29 16:03 16 -
88 2017-12-29 16:04 18 -
89 2017-12-29 16:05 20 *
90 2017-12-29 16:06 18 -
91 2017-12-29 16:07 19 -
92 2017-12-29 16:08 20 *
93 2017-12-29 16:09 21 **
94 2017-12-29 16:10 22 ***
... ..( 6 skipped). .. ***
101 2017-12-29 16:17 22 ***
102 2017-12-29 16:18 ? -
103 2017-12-29 16:19 22 ***
104 2017-12-29 16:20 27 ********
105 2017-12-29 16:21 28 *********
106 2017-12-29 16:22 ? -
107 2017-12-29 16:23 29 **********
108 2017-12-29 16:24 31 ************
109 2017-12-29 16:25 33 **************
Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron]
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x8000 4 320 Vendor specific
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment