Skip to content

Instantly share code, notes, and snippets.

@enukane

enukane/ignitenet-spac750-dmesg.txt

Created June 22, 2024 08:02
Show Gist options
  • Save enukane/337394a447ae1d5eb9642ce55a7c1304 to your computer and use it in GitHub Desktop.
Save enukane/337394a447ae1d5eb9642ce55a7c1304 to your computer and use it in GitHub Desktop.
Download ZIP
IgniteNet SP-AC750-3AFのdmesg
Raw
ignitenet-spac750-dmesg.txt
[ 0.000000] Linux version 3.18.29 (buildbot@catfish) (gcc version 4.6.4 (Realtek RSDK-4.6.4 Build 2002) ) #2 Wed Jun 12 10:35:41 EEST 2019
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0000dc02
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 03400000 @ 00000000 (usable)
[ 0.000000] memory: 00bc0000 @ 03440000 (usable)
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x033fffff]
[ 0.000000] node 0: [mem 0x03440000-0x03ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16320
[ 0.000000] free_area_init_node: node 0, pgdat 80315b10, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16320 pages, LIFO batch:3
[ 0.000000] icache: 64kB/32B, dcache: 32kB/32B, scache: 0kB/0B
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16192
[ 0.000000] Kernel command line: board=SP-AC750 console=ttyS0,38400 linuxpart=0x10000 hwpart=0x6000
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Memory: 61140K/65280K available (2621K kernel code, 128K rwdata, 440K rodata, 156K init, 121K bss, 4140K reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:128
[ 0.000000] console [ttyS0] enabled
[ 0.010000] bootconsole [early0] disabled
[ 0.020000] Calibrating delay loop... 518.55 BogoMIPS (lpj=2592768)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.110000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.230000] NET: Registered protocol family 16
[ 0.250000] console [pstore-1] enabled
[ 0.260000] pstore: Registered ramoops as persistent store backend
[ 0.270000] ramoops: attached 0x40000@0x3400000, ecc: 0/0
[ 0.310000] usbcore: registered new interface driver usbfs
[ 0.320000] usbcore: registered new interface driver hub
[ 0.330000] usbcore: registered new device driver usb
[ 0.340000] NET: Registered protocol family 2
[ 0.350000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.360000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.370000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.380000] TCP: reno registered
[ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.410000] NET: Registered protocol family 1
[ 0.420000] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.480000] msgmni has been set to 119
[ 0.510000] io scheduler noop registered (default)
[ 0.570000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.590000] serial8250: ttyS0 at MMIO 0x18002000 (irq = 8, base_baud = 12500000) is a 16550A
[ 0.600000] SPI INIT
[ 0.610000] ------------------------- Force into Single IO Mode ------------------------
[ 0.620000] |No chipID Sft chipSize blkSize secSize pageSize sdCk opCk chipName |
[ 0.630000] | 0 c22018h 0h 1000000h 10000h 1000h 100h 50 0 MX25L12805D/45E|
[ 0.640000] ----------------------------------------------------------------------------
[ 0.650000] SPI flash(MX25L12805D/45E) was found at CS0, size 0x1000000
[ 0.770000] Creating 6 MTD partitions on "flash_bank_1":
[ 0.780000] 0x000000000000-0x000000010000 : "boot"
[ 0.800000] 0x000000800000-0x000000fe0000 : "linux"
[ 0.810000] 0x00000091f000-0x000000fe0000 : "rootfs"
[ 0.820000] mtd: device 2 (rootfs) set to be root filesystem
[ 0.830000] Support for built-in "rootfs_data" splitter will be removed, please use CONFIG_MTD_SPLIT_SQUASHFS_ROOT
[ 0.840000] mtd: partition "rootfs_data" created automatically, ofs=0xe81000, len=0x15f000
[ 0.850000] 0x000000e81000-0x000000fe0000 : "rootfs_data"
[ 0.860000] 0x000000010000-0x0000007f0000 : "linux_backup"
[ 0.870000] 0x000000fe0000-0x000000ff0000 : "priv_data1"
[ 0.880000] 0x000000ff0000-0x000001000000 : "priv_data2"
[ 0.890000]
[ 0.890000] Probing RTL819X NIC-kenel stack size order[1]...
[ 2.370000] eth0 added. vid=8 Member port 0x1...
[ 2.380000] eth1 added. vid=9 Member port 0x10...
[ 2.400000] eth2 added. vid=9 Member port 0x4...
[ 2.410000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.420000] rtl819x-ehci rtl819x-ehci: Realtek rtl819x On-Chip EHCI Host Controller
[ 2.430000] rtl819x-ehci rtl819x-ehci: new USB bus registered, assigned bus number 1
[ 2.470000] rtl819x-ehci rtl819x-ehci: irq 10, io mem 0x18021000
[ 2.510000] rtl819x-ehci rtl819x-ehci: USB 2.0 started, EHCI 1.00
[ 2.520000] hub 1-0:1.0: USB hub found
[ 2.530000] hub 1-0:1.0: 1 port detected
[ 2.540000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.550000] rtl819x-ohci rtl819x-ohci: Realtek rtl819x built-in OHCI controller
[ 2.560000] rtl819x-ohci rtl819x-ohci: new USB bus registered, assigned bus number 2
[ 2.570000] rtl819x-ohci rtl819x-ohci: irq 10, io mem 0x18020000
[ 2.640000] hub 2-0:1.0: USB hub found
[ 2.650000] hub 2-0:1.0: 1 port detected
[ 2.660000] -------8196D OTG init
[ 2.870000] dwc_otg: version 2.60a 22-NOV-2006
[ 2.880000] [S0] lmdev=83a16200
[ 2.890000] device_register :register pass
[ 2.910000] [S2] otg_dev=83958660
[ 3.120000] [S3] hcd==8395a400
[ 3.130000] DWC_otg: Using DMA mode
[ 3.140000] dwc_otg logicmodule: DWC OTG Controller
[ 3.150000] dwc_otg logicmodule: new USB bus registered, assigned bus number 3
[ 3.160000] dwc_otg logicmodule: irq 15, io mem 0xb8030000
[ 3.170000] set OTG host to high speed !
[ 3.180000] DWC_otg: Init: Port Power? op_state=1
[ 3.190000] DWC_otg: Init: Power Port (0)
[ 3.200000] hub 3-0:1.0: USB hub found
[ 3.210000] hub 3-0:1.0: 1 port detected
[ 3.220000] [S1] dwc_otg_driver, lmdriver=80324190
[ 3.230000] TCP: cubic registered
[ 3.240000] NET: Registered protocol family 17
[ 3.250000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 3.260000] Bridge firewalling registered
[ 3.270000] 8021q: 802.1Q VLAN Support v1.8
[ 3.290000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 3.300000] Freeing unused kernel memory: 156K (80329000 - 80350000)
[ 4.750000] init: Console is alive
[ 4.830000] random: kmodloader urandom read with 7 bits of entropy available
[ 6.590000] Button Hotplug driver version 0.4.1
[ 6.600000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled/input/input0
[ 6.790000] init: - preinit -
[ 11.510000] jffs2: notice: (845) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 11.520000] mount_root: overlay filesystem has not been fully initialized yet
[ 11.540000] mount_root: switching to jffs2 overlay
[ 11.570000] procd: - early -
[ 12.980000] procd: - ubus -
[ 14.010000] procd: - init -
[ 18.140000] NET: Registered protocol family 10
[ 18.240000] tun: Universal TUN/TAP device driver, 1.6
[ 18.250000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 18.260000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.310000] Loading modules backported from Linux version v4.4-rc5-1913-gc8fdf68
[ 18.320000] Backport generated by backports.git backports-20151218-0-g2f58d9d
[ 18.360000] Ebtables v2.0 registered
[ 18.370000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.400000] nf_conntrack version 0.5.0 (957 buckets, 3828 max)
[ 18.450000] Netfilter messages via NETLINK v0.30.
[ 18.490000] usbcore: registered new interface driver usbserial
[ 18.500000] usbcore: registered new interface driver usbserial_generic
[ 18.510000] usbserial: USB Serial support registered for generic
[ 18.550000] xt_coova: ready
[ 18.600000] xt_time: kernel timezone is -0000
[ 18.610000] usbcore: registered new interface driver cdc_ether
[ 18.760000] ctnetlink v0.93: registering with nfnetlink.
[ 18.780000] PPP generic driver version 2.4.2
[ 18.800000] NET: Registered protocol family 24
[ 20.030000] Realtek WLAN driver - version 1.7 (2015-10-30)
[ 20.040000] DFS function - version 2.0.14
[ 20.050000] Adaptivity function - version 9.3.4
[ 20.060000] Init WLAN device 0, type EMBED (0)
[ 20.070000] Device Name = RTKWiFi0
[ 20.080000] VIF_NUM=9
[ 20.090000] MACHAL_version_init
[ 20.160000] Init WLAN device 1, type PCI (1)
[ 20.170000] Device Name = RTKWiFi1
[ 20.180000] VIF_NUM=9
[ 20.190000] CFG0
[ 24.700000] Find Port=0 Device:Vender ID=818b10ec
[ 25.210000] MACHAL_version_init
[ 25.260000] usbcore: registered new interface driver snd-usb-audio
[ 25.290000] usbcore: registered new interface driver option
[ 25.300000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 51.530000] device eth1 entered promiscuous mode
[ 51.570000] br-lan: port 1(eth1) entered listening state
[ 51.580000] br-lan: port 1(eth1) entered listening state
[ 51.590000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 51.680000] device eth2 entered promiscuous mode
[ 51.690000] br-lan: port 2(eth2) entered listening state
[ 51.700000] br-lan: port 2(eth2) entered listening state
[ 53.580000] br-lan: port 1(eth1) entered learning state
[ 53.700000] br-lan: port 2(eth2) entered learning state
[ 55.580000] br-lan: topology change detected, propagating
[ 55.590000] br-lan: port 1(eth1) entered forwarding state
[ 55.600000] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 55.700000] br-lan: topology change detected, propagating
[ 55.710000] br-lan: port 2(eth2) entered forwarding state
[ 72.890000] random: nonblocking pool is initialized
[ 80.480000] WlanSupportAbility = 0x3
[ 80.500000] [ODM_software_init]
[ 80.500000] clock 40MHz
[ 80.500000]
[ 80.500000]
[ 80.500000] ************* Initialize MAC/PHY parameter *************
[ 80.500000] [MAC_REG_8192Emp]
[ 80.500000] RTL8192E_MAC_PHY_Parameter_v016_MP_20130705//0x16 0x36 // SWR by Hillo
[ 80.520000] [PHY_REG_8192E_hp]
[ 80.530000] [PHY_REG_PG_8192E_new]
[ 80.540000] [AGC_TAB_8192E_hp]
[ 80.550000] [RadioA_8192E_hp]
[ 80.560000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 80.930000] [RadioB_8192E_hp]
[ 80.940000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 81.290000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 81.300000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=2246
[ 81.310000] [TxPowerTrack_AP]
[ 81.690000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 81.800000] device wlan1 entered promiscuous mode
[ 82.290000] WlanSupportAbility = 0x1
[ 82.300000] Disable TXBFer due to 1T only !
[ 82.310000] [ODM_software_init]
[ 82.310000] clock 40MHz
[ 82.310000]
[ 82.310000]
[ 82.310000] ************* Initialize MAC/PHY parameter *************
[ 82.310000] [MAC_REG_8881Am]
[ 82.310000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V004_20140708_Beta//0x010 0x0c // AFE power cut
[ 82.330000] [PHY_REG_8881Am]
[ 82.340000] [PHY_REG_PG_8881ABP]
[ 82.350000] [AGC_TAB_8881ABP]
[ 82.360000] [RadioA_8881ABP]
[ 82.370000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V005_20140717//A MODE S0:5210
[ 82.960000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 82.970000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=3403
[ 82.980000] [TxPowerTrack_AP_8881ABP]
[ 82.990000] RL6299_MAC_PHY_RF_Parameter_v012_20130508//=======================================================================================================================================//
[ 83.150000] 8881A internal PA PIN control or 8881A high power
[ 83.160000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 83.220000] device wlan0 entered promiscuous mode
[ 86.170000] WlanSupportAbility = 0x1
[ 86.190000] [ODM_software_init]
[ 86.190000] clock 40MHz
[ 86.190000]
[ 86.190000]
[ 86.190000] ************* Initialize MAC/PHY parameter *************
[ 86.190000] [MAC_REG_8881Am]
[ 86.190000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V004_20140708_Beta//0x010 0x0c // AFE power cut
[ 86.200000] [PHY_REG_8881Am]
[ 86.210000] [PHY_REG_PG_8881ABP]
[ 86.220000] [AGC_TAB_8881ABP]
[ 86.230000] [RadioA_8881ABP]
[ 86.240000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V005_20140717//A MODE S0:5210
[ 86.820000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 86.830000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=3403
[ 86.840000] [TxPowerTrack_AP_8881ABP]
[ 86.850000] RL6299_MAC_PHY_RF_Parameter_v012_20130508//=======================================================================================================================================//
[ 87.010000] 8881A internal PA PIN control or 8881A high power
[ 87.020000] br-lan: port 4(wlan0) entered listening state
[ 87.030000] br-lan: port 4(wlan0) entered listening state
[ 87.040000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 87.100000] WlanSupportAbility = 0x3
[ 87.120000] [ODM_software_init]
[ 87.120000] clock 40MHz
[ 87.120000]
[ 87.120000]
[ 87.120000] ************* Initialize MAC/PHY parameter *************
[ 87.120000] [MAC_REG_8192Emp]
[ 87.120000] RTL8192E_MAC_PHY_Parameter_v016_MP_20130705//0x16 0x36 // SWR by Hillo
[ 87.130000] [PHY_REG_8192E_hp]
[ 87.140000] [PHY_REG_PG_8192E_new]
[ 87.150000] [AGC_TAB_8192E_hp]
[ 87.160000] [RadioA_8192E_hp]
[ 87.170000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 87.540000] [RadioB_8192E_hp]
[ 87.550000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 87.900000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 87.910000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=2246
[ 87.920000] [TxPowerTrack_AP]
[ 89.030000] br-lan: port 4(wlan0) entered learning state
[ 90.230000] br-lan: port 3(wlan1) entered listening state
[ 90.240000] br-lan: port 3(wlan1) entered listening state
[ 90.250000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 91.030000] br-lan: topology change detected, propagating
[ 91.040000] br-lan: port 4(wlan0) entered forwarding state
[ 92.240000] br-lan: port 3(wlan1) entered learning state
[ 92.290000] device wlan1 left promiscuous mode
[ 92.300000] br-lan: port 3(wlan1) entered disabled state
[ 94.000000] device wlan0 left promiscuous mode
[ 94.010000] br-lan: port 4(wlan0) entered disabled state
[ 117.040000] WlanSupportAbility = 0x3
[ 117.060000] [ODM_software_init]
[ 117.060000] clock 40MHz
[ 117.060000]
[ 117.060000]
[ 117.060000] ************* Initialize MAC/PHY parameter *************
[ 117.060000] [MAC_REG_8192Emp]
[ 117.060000] RTL8192E_MAC_PHY_Parameter_v016_MP_20130705//0x16 0x36 // SWR by Hillo
[ 117.070000] [PHY_REG_8192E_hp]
[ 117.080000] [PHY_REG_PG_8192E_new]
[ 117.090000] [AGC_TAB_8192E_hp]
[ 117.100000] [RadioA_8192E_hp]
[ 117.110000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 117.480000] [RadioB_8192E_hp]
[ 117.490000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 117.840000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 117.850000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=2246
[ 117.860000] [TxPowerTrack_AP]
[ 118.220000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 118.490000] device wlan1 entered promiscuous mode
[ 118.810000] WlanSupportAbility = 0x1
[ 118.820000] [ODM_software_init]
[ 118.820000] clock 40MHz
[ 118.820000]
[ 118.820000]
[ 118.820000] ************* Initialize MAC/PHY parameter *************
[ 118.820000] [MAC_REG_8881Am]
[ 118.820000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V004_20140708_Beta//0x010 0x0c // AFE power cut
[ 118.830000] [PHY_REG_8881Am]
[ 118.840000] [PHY_REG_PG_8881ABP]
[ 118.860000] [AGC_TAB_8881ABP]
[ 118.870000] [RadioA_8881ABP]
[ 118.880000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V005_20140717//A MODE S0:5210
[ 119.470000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 119.480000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=3403
[ 119.490000] [TxPowerTrack_AP_8881ABP]
[ 119.500000] RL6299_MAC_PHY_RF_Parameter_v012_20130508//=======================================================================================================================================//
[ 119.660000] 8881A internal PA PIN control or 8881A high power
[ 119.670000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 119.720000] device wlan0 entered promiscuous mode
[ 122.680000] WlanSupportAbility = 0x1
[ 122.700000] [ODM_software_init]
[ 122.700000] clock 40MHz
[ 122.700000]
[ 122.700000]
[ 122.700000] ************* Initialize MAC/PHY parameter *************
[ 122.700000] [MAC_REG_8881Am]
[ 122.700000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V004_20140708_Beta//0x010 0x0c // AFE power cut
[ 122.710000] [PHY_REG_8881Am]
[ 122.720000] [PHY_REG_PG_8881ABP]
[ 122.730000] [AGC_TAB_8881ABP]
[ 122.740000] [RadioA_8881ABP]
[ 122.750000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V005_20140717//A MODE S0:5210
[ 123.350000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 123.360000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=3403
[ 123.370000] [TxPowerTrack_AP_8881ABP]
[ 123.380000] RL6299_MAC_PHY_RF_Parameter_v012_20130508//=======================================================================================================================================//
[ 123.540000] 8881A internal PA PIN control or 8881A high power
[ 123.590000] WlanSupportAbility = 0x3
[ 123.610000] [ODM_software_init]
[ 123.610000] clock 40MHz
[ 123.610000]
[ 123.610000]
[ 123.610000] ************* Initialize MAC/PHY parameter *************
[ 123.610000] [MAC_REG_8192Emp]
[ 123.610000] RTL8192E_MAC_PHY_Parameter_v016_MP_20130705//0x16 0x36 // SWR by Hillo
[ 123.620000] [PHY_REG_8192E_hp]
[ 123.640000] [PHY_REG_PG_8192E_new]
[ 123.650000] [AGC_TAB_8192E_hp]
[ 123.660000] [RadioA_8192E_hp]
[ 123.670000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 124.040000] [RadioB_8192E_hp]
[ 124.050000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 124.400000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 124.410000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=2246
[ 124.420000] [TxPowerTrack_AP]
[ 124.830000] br-lan: port 4(wlan0) entered listening state
[ 124.840000] br-lan: port 4(wlan0) entered listening state
[ 124.850000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 124.860000] br-lan: port 3(wlan1) entered listening state
[ 124.870000] br-lan: port 3(wlan1) entered listening state
[ 124.880000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 126.840000] br-lan: port 4(wlan0) entered learning state
[ 126.870000] br-lan: port 3(wlan1) entered learning state
[ 128.840000] br-lan: topology change detected, propagating
[ 128.850000] br-lan: port 4(wlan0) entered forwarding state
[ 128.870000] br-lan: topology change detected, propagating
[ 128.880000] br-lan: port 3(wlan1) entered forwarding state
[ 291.510000] br-lan: port 4(wlan0) entered disabled state
[ 291.600000] br-lan: port 3(wlan1) entered disabled state
[ 292.400000] device wlan1 left promiscuous mode
[ 292.410000] br-lan: port 3(wlan1) entered disabled state
[ 292.490000] device wlan0 left promiscuous mode
[ 292.500000] br-lan: port 4(wlan0) entered disabled state
[ 328.520000] WlanSupportAbility = 0x3
[ 328.540000] [ODM_software_init]
[ 328.540000] clock 40MHz
[ 328.540000]
[ 328.540000]
[ 328.540000] ************* Initialize MAC/PHY parameter *************
[ 328.540000] [MAC_REG_8192Emp]
[ 328.540000] RTL8192E_MAC_PHY_Parameter_v016_MP_20130705//0x16 0x36 // SWR by Hillo
[ 328.550000] [PHY_REG_8192E_hp]
[ 328.570000] [PHY_REG_PG_8192E_new]
[ 328.580000] [AGC_TAB_8192E_hp]
[ 328.590000] [RadioA_8192E_hp]
[ 328.600000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 328.970000] [RadioB_8192E_hp]
[ 328.980000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 329.330000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 329.340000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=2246
[ 329.350000] [TxPowerTrack_AP]
[ 329.730000] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 329.780000] WlanSupportAbility = 0x1
[ 329.790000] [ODM_software_init]
[ 329.790000] clock 40MHz
[ 329.790000]
[ 329.790000]
[ 329.790000] ************* Initialize MAC/PHY parameter *************
[ 329.790000] [MAC_REG_8881Am]
[ 329.790000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V004_20140708_Beta//0x010 0x0c // AFE power cut
[ 329.800000] [PHY_REG_8881Am]
[ 329.810000] [PHY_REG_PG_8881ABP]
[ 329.820000] [AGC_TAB_8881ABP]
[ 329.830000] [RadioA_8881ABP]
[ 329.840000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V005_20140717//A MODE S0:5210
[ 330.300000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 330.320000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=3403
[ 330.330000] [TxPowerTrack_AP_8881ABP]
[ 330.340000] RL6299_MAC_PHY_RF_Parameter_v012_20130508//=======================================================================================================================================//
[ 330.500000] 8881A internal PA PIN control or 8881A high power
[ 330.520000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 330.590000] device wlan0 entered promiscuous mode
[ 330.640000] device wlan1 entered promiscuous mode
[ 331.960000] WlanSupportAbility = 0x1
[ 331.980000] [ODM_software_init]
[ 331.980000] clock 40MHz
[ 331.980000]
[ 331.980000]
[ 331.980000] ************* Initialize MAC/PHY parameter *************
[ 331.980000] [MAC_REG_8881Am]
[ 331.980000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V004_20140708_Beta//0x010 0x0c // AFE power cut
[ 331.990000] [PHY_REG_8881Am]
[ 332.000000] [PHY_REG_PG_8881ABP]
[ 332.010000] [AGC_TAB_8881ABP]
[ 332.020000] [RadioA_8881ABP]
[ 332.030000] RL6310_MAC_PHY_RF_Parameter_8881A_Merge_V005_20140717//A MODE S0:5210
[ 332.610000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 332.620000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=3403
[ 332.630000] [TxPowerTrack_AP_8881ABP]
[ 332.640000] RL6299_MAC_PHY_RF_Parameter_v012_20130508//=======================================================================================================================================//
[ 332.810000] 8881A internal PA PIN control or 8881A high power
[ 332.820000] br-lan: port 3(wlan0) entered listening state
[ 332.830000] br-lan: port 3(wlan0) entered listening state
[ 332.840000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 334.830000] br-lan: port 3(wlan0) entered learning state
[ 335.910000] WlanSupportAbility = 0x3
[ 335.930000] [ODM_software_init]
[ 335.930000] clock 40MHz
[ 335.930000]
[ 335.930000]
[ 335.930000] ************* Initialize MAC/PHY parameter *************
[ 335.930000] [MAC_REG_8192Emp]
[ 335.930000] RTL8192E_MAC_PHY_Parameter_v016_MP_20130705//0x16 0x36 // SWR by Hillo
[ 335.940000] [PHY_REG_8192E_hp]
[ 335.960000] [PHY_REG_PG_8192E_new]
[ 335.970000] [AGC_TAB_8192E_hp]
[ 335.980000] [RadioA_8192E_hp]
[ 335.990000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 336.360000] [RadioB_8192E_hp]
[ 336.370000] RTL8192E_MAC_PHY_Parameter_v023_MP_201309100x7F 0x00082 // for C cut POW_SYN
[ 336.720000] [PHY_ConfigTXPwrTrackingWithParaFile 4326]
[ 336.730000] [PHY_ConfigTXPwrTrackingWithParaFile 4396] read_bytes=2246
[ 336.740000] [TxPowerTrack_AP]
[ 336.830000] br-lan: topology change detected, propagating
[ 336.840000] br-lan: port 3(wlan0) entered forwarding state
[ 337.150000] br-lan: port 4(wlan1) entered listening state
[ 337.160000] br-lan: port 4(wlan1) entered listening state
[ 337.170000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 339.160000] br-lan: port 4(wlan1) entered learning state
[ 341.160000] br-lan: topology change detected, propagating
[ 341.170000] br-lan: port 4(wlan1) entered forwarding state
[ 374.780000] ===================================
[ 374.790000] ========= WLAN0 REG DUMP ==========
[ 374.800000] [Channel-036] - 20M BW
[ 374.810000] Initial Gain, Sensitivity:
[ 374.820000] 0xC50: 0x20
[ 374.830000] 0xC58: 0x1c
[ 374.830000] 0xE50: 0x00
[ 374.840000] 0xC30: 0x1e
[ 374.850000] 0xC87: 0x19
[ 374.860000] 0xA0A: 0x40
[ 374.870000] EDCA para:
[ 374.870000] VO(0x500): 0x002f3219
[ 374.880000] VI(0x504): 0x005e4313
[ 374.890000] BE(0x508): 0x0000642b
[ 374.900000] BK(0x50c): 0x0000a64f
[ 374.910000] Tx power:
[ 374.920000] A_CCK11_CCK1(0xc20): 0x2c2c2c2c
[ 374.930000] A_Rate18_06(0xc24): 0x1d1d1d1d
[ 374.940000] A_Rate54_24(0xc28): 0x1d1d1d1d
[ 374.950000] A_Mcs03_Mcs00(0xc2c): 0x1e1e1e1e
[ 374.960000] A_Mcs07_Mcs04(0xc30): 0x1e1e1e1e
[ 374.970000] A_Mcs11_Mcs08(0xc34): 0x1e1e1e1e
[ 374.980000] A_Mcs15_Mcs12(0xc38): 0x1e1e1e1e
[ 374.990000] A_Nss13_Nss10(0xc3c): 0x1e1e1e1e
[ 375.000000] A_Nss17_Nss14(0xc40): 0x1f1e1e1e
[ 375.010000] A_Nss21_Nss18(0xc44): 0x1e1e1c1c
[ 375.020000] A_Nss25_Nss22(0xc48): 0x1e1e1e1e
[ 375.030000] A_Nss29_Nss26(0xc4c): 0x1e1e1e1e
[ 375.040000] B_CCK11_CCK1(0xe20): 0x00000000
[ 375.050000] B_Rate18_06(0xe24): 0x00000000
[ 375.060000] B_Rate54_24(0xe28): 0x00000000
[ 375.070000] B_Mcs03_Mcs00(0xe2c): 0x00000000
[ 375.080000] B_Mcs07_Mcs04(0xe30): 0x00000000
[ 375.090000] B_Mcs11_Mcs08(0xe34): 0x00000000
[ 375.100000] B_Mcs15_Mcs12(0xe38): 0x00000000
[ 375.110000] B_Nss13_Nss10(0xe3c): 0x00000000
[ 375.120000] B_Nss17_Nss14(0xe40): 0x00000000
[ 375.130000] B_Nss21_Nss18(0xe44): 0x00000000
[ 375.140000] B_Nss25_Nss22(0xe48): 0x00000000
[ 375.150000] B_Nss29_Nss26(0xe4c): 0x00000000
[ 375.170000] ===================================
[ 375.180000] ========= WLAN1 REG DUMP ==========
[ 375.190000] [Channel-006] - 20M BW
[ 375.200000] Initial Gain, Sensitivity:
[ 375.210000] 0xC50: 0x20
[ 375.220000] 0xC30: 0x47
[ 375.220000] 0xC87: 0x21
[ 375.230000] 0xA0A: 0x40
[ 375.240000] EDCA para:
[ 375.250000] VO(0x500): 0x002f3219
[ 375.260000] VI(0x504): 0x005e4313
[ 375.270000] BE(0x508): 0x0000642b
[ 375.280000] BK(0x50c): 0x0000a44f
[ 375.290000] Tx power:
[ 375.300000] A_CCK1_Mcs32(0xe08): 0x03901b30
[ 375.310000] B_CCK5_1_Mcs32(0x838): 0x1b1b1b30
[ 375.320000] A_CCK11_2_B_CCK11(0x86c): 0x1b1b1b1b
[ 375.330000] A_Rate18_06(0xe00): 0x24242424
[ 375.340000] A_Rate54_24(0xe04): 0x24242424
[ 375.350000] A_Mcs03_Mcs00(0xe10): 0x24242424
[ 375.360000] A_Mcs07_Mcs04(0xe14): 0x24242424
[ 375.370000] A_Mcs11_Mcs08(0xe18): 0x25252525
[ 375.380000] A_Mcs15_Mcs12(0xe1c): 0x25252525
[ 375.390000] B_Rate18_06(0x830): 0x21212121
[ 375.400000] B_Rate54_24(0x834): 0x21212121
[ 375.410000] B_Mcs03_Mcs00(0x83c): 0x21212121
[ 375.420000] B_Mcs07_Mcs04(0x848): 0x21212121
[ 375.430000] B_Mcs11_Mcs08(0x84c): 0x20202020
[ 375.440000] B_Mcs15_Mcs12(0x868): 0x20202020
[ 375.450000] ===================================
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment