enukane

# policy
bgp AS Number := 650000 + ($layer - 1) * 100 + $inLayerID
    $layer := { 1 (external), 2 (aggr) , 3 (head
    $inlayerid := counter from left
    e.g. aggr router with ID=2 -> 65102


# bgp-local(101, 10.1.$ID.1/32)
.1: seilx1-1
$ID := ($layer - 1) * 100 + $InLayerID

enukane

% ifconfig -v en0                                                                                                                                                                                                        [](03/25/20 13:43)
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 index 6
	eflags=412008c0<ACCEPT_RTADV,TXSTART,ARPLL,NOACKPRI,ECN_ENABLE,FASTLN_ON>
	xflags=1<WOL>
	options=400<CHANNEL_IO>
	ether f0:18:98:XX:XX:XX
	inet6 fe80::87b:d440:XXX:XXXX%en0 prefixlen 64 secured scopeid 0x6
	inet 10.10.2.102 netmask 0xfffffe00 broadcast 10.10.3.255
	netif: 2AD4AFD3-8A74-XXXX-XXXX-6CA1152511A7
	flowswitch: F8A9466A-6731-XXXX-XXXX-D12192B8A88B

enukane

HUAWEI Startcode 2015.01 (Jan 18 2017 - 15:59:50)

DRAM:   1 GB
Boot From NAND Flash
CHIP ID = 51180100
NAND:  Special Nand id table Version 1.23
Nand ID: 0x2C 0xDC 0x90 0x95 0x56 0x00 0x00 0x00
512 MiB
In:    serial
Out:   serial

enukane

HUAWEI Startcode 2015.01 (Jan 18 2017 - 15:59:50)

DRAM:   1 GB
Boot From NAND Flash
CHIP ID = 51180100
NAND:  Special Nand id table Version 1.23
Nand ID: 0x2C 0xDC 0x90 0x95 0x56 0x00 0x00 0x00
512 MiB
In:    serial
Out:   serial

enukane

[    0.000000] microcode: microcode updated early to revision 0x12d, date = 2019-09-16
[    0.000000] Linux version 5.3.0-26-generic (buildd@lgw01-amd64-013) (gcc version 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #28-Ubuntu SMP Wed Dec 18 05:37:46 UTC 2019 (Ubuntu 5.3.0-26.28-generic 5.3.13)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-26-generic root=UUID=85242ad6-107a-48dc-af3a-26b8e3290d95 ro splash quiet vt.handoff=7
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai
[    0.000000] x86/fpu: x87 FPU will use FXSAVE

enukane

[config]$ get ap config
Current AP config file is:
--------------------------
[ RADIO_START ]
WIRELESS_MODE=3
AP_CHAN_WIDTH=1
OP_CHANNEL=0
FRAG_THRESH=2346
RTSCTS_THRESH=2347
BEACON_INT=100

enukane

U-Boot 1.1.4 (Jun 22 2014 - 15:02:11)

ap135 - Scorpion 1.0DRAM:
sri
Scorpion 1.0
ath_ddr_initial_config(200): (32bit) ddr2 init
tap = 0x00000003
Tap (low, high) = (0x5, 0x1f)
Tap values = (0x12, 0x12, 0x12, 0x12)
128 MB

enukane

メーカー	型番	個数	規格	MIMO:ストリーム	備考
Ruckus	ZoneFlex 7341	1	bgn	2x2:2
	ZoneFlex 7363	1	bgn+an	2x2:2+2x2:2
	H510	1	bgn+an/ac w2	2x2:2+2x2:2	壊れたので廃棄
Aruba	IAP-103	1	bgn+an	2x2:2+2x2:2
	AP22	1	bgn+an/ac/ax	2x2:2+2x2:2
	AP17	1	bgn+an/ac	2x2:2+2x2:2	屋外モデル
	AP11D	4	bgn+an/ac	2x2:2:2x2:2	APINH303, shownet2024で一つギフト
Cisco	AIR-CAP2602I-Q-K9	1	bgn+an	3x3:3+3x4:3

enukane

U-Boot 2012.10 (Apr 27 2019 - 23:36:59)

I2C:   ready
Wait.
Done.
DEV ID= 0000cf12
REV ID= 00000000
SKU ID = 0
OTP status: eca00018
MEMC 0 DDR speed = 800MHz

enukane

{
  "1": true,
  "2": true,
  "3": true,
  "4": true,
  "5": true,
  "6": true,
  "7": true,
  "8": true,
  "9": true,