Last active
November 20, 2018 21:28
-
-
Save evadeflow/4a30a46ed90894b6de69e001eb576607 to your computer and use it in GitHub Desktop.
MMC tools output for 'bad' board
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
============================================= | |
Extended CSD rev 1.8 (MMC 5.1) | |
============================================= | |
Card Supported Command sets [S_CMD_SET: 0x01] | |
HPI Features [HPI_FEATURE: 0x01]: implementation based on CMD13 | |
Background operations support [BKOPS_SUPPORT: 0x01] | |
Max Packet Read Cmd [MAX_PACKED_READS: 0x3f] | |
Max Packet Write Cmd [MAX_PACKED_WRITES: 0x3f] | |
Data TAG support [DATA_TAG_SUPPORT: 0x01] | |
Data TAG Unit Size [TAG_UNIT_SIZE: 0x03] | |
Tag Resources Size [TAG_RES_SIZE: 0x00] | |
Context Management Capabilities [CONTEXT_CAPABILITIES: 0x05] | |
Large Unit Size [LARGE_UNIT_SIZE_M1: 0x07] | |
Extended partition attribute support [EXT_SUPPORT: 0x03] | |
Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x0a] | |
Power off notification [POWER_OFF_LONG_TIME: 0x3c] | |
Cache Size [CACHE_SIZE] is 65536 KiB | |
Background operations status [BKOPS_STATUS: 0x00] | |
1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x1e] | |
Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00] | |
Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00] | |
Power class for 200MHz at 3.6V [PWR_CL_200_360: 0x00] | |
Power class for 200MHz, at 1.95V [PWR_CL_200_195: 0x00] | |
Minimum Performance for 8bit at 52MHz in DDR mode: | |
[MIN_PERF_DDR_W_8_52: 0x00] | |
[MIN_PERF_DDR_R_8_52: 0x00] | |
TRIM Multiplier [TRIM_MULT: 0x02] | |
Secure Feature support [SEC_FEATURE_SUPPORT: 0x55] | |
Boot Information [BOOT_INFO: 0x07] | |
Device supports alternative boot method | |
Device supports dual data rate during boot | |
Device supports high speed timing during boot | |
Boot partition size [BOOT_SIZE_MULTI: 0x20] | |
Access size [ACC_SIZE: 0x07] | |
High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01] | |
i.e. 512 KiB | |
High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01] | |
Reliable write sector count [REL_WR_SEC_C: 0x01] | |
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x10] | |
i.e. 8192 KiB | |
Sleep current (VCC) [S_C_VCC: 0x07] | |
Sleep current (VCCQ) [S_C_VCCQ: 0x07] | |
Sleep/awake timeout [S_A_TIMEOUT: 0x11] | |
Sector Count [SEC_COUNT: 0x00e90000] | |
Device is block-addressed | |
Minimum Write Performance for 8bit: | |
[MIN_PERF_W_8_52: 0x00] | |
[MIN_PERF_R_8_52: 0x00] | |
[MIN_PERF_W_8_26_4_52: 0x00] | |
[MIN_PERF_R_8_26_4_52: 0x00] | |
Minimum Write Performance for 4bit: | |
[MIN_PERF_W_4_26: 0x00] | |
[MIN_PERF_R_4_26: 0x00] | |
Power classes registers: | |
[PWR_CL_26_360: 0x00] | |
[PWR_CL_52_360: 0x00] | |
[PWR_CL_26_195: 0x00] | |
[PWR_CL_52_195: 0x00] | |
Partition switching timing [PARTITION_SWITCH_TIME: 0x01] | |
Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x05] | |
I/O Driver Strength [DRIVER_STRENGTH: 0x1f] | |
Card Type [CARD_TYPE: 0x57] | |
HS200 Single Data Rate eMMC @200MHz 1.8VI/O | |
HS Dual Data Rate eMMC @52MHz 1.8V or 3VI/O | |
HS eMMC @52MHz - at rated device voltage(s) | |
HS eMMC @26MHz - at rated device voltage(s) | |
CSD structure version [CSD_STRUCTURE: 0x02] | |
Command set [CMD_SET: 0x00] | |
Command set revision [CMD_SET_REV: 0x00] | |
Power class [POWER_CLASS: 0x00] | |
High-speed interface timing [HS_TIMING: 0x02] | |
Erased memory content [ERASED_MEM_CONT: 0x00] | |
Boot configuration bytes [PARTITION_CONFIG: 0x38] | |
User Area Enabled for boot | |
No access to boot partition | |
Boot config protection [BOOT_CONFIG_PROT: 0x00] | |
Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x02] | |
High-density erase group definition [ERASE_GROUP_DEF: 0x00] | |
Boot write protection status registers [BOOT_WP_STATUS]: 0x00 | |
Boot Area Write protection [BOOT_WP]: 0x00 | |
Power ro locking: possible | |
Permanent ro locking: possible | |
ro lock status: not locked | |
User area write protection register [USER_WP]: 0x00 | |
FW configuration [FW_CONFIG]: 0x00 | |
RPMB Size [RPMB_SIZE_MULT]: 0x04 | |
Write reliability setting register [WR_REL_SET]: 0x1f | |
user area: the device protects existing data if a power failure occurs during a write operation | |
partition 1: the device protects existing data if a power failure occurs during a write operation | |
partition 2: the device protects existing data if a power failure occurs during a write operation | |
partition 3: the device protects existing data if a power failure occurs during a write operation | |
partition 4: the device protects existing data if a power failure occurs during a write operation | |
Write reliability parameter register [WR_REL_PARAM]: 0x04 | |
Device supports the enhanced def. of reliable write | |
Enable background operations handshake [BKOPS_EN]: 0x00 | |
H/W reset function [RST_N_FUNCTION]: 0x01 | |
HPI management [HPI_MGMT]: 0x01 | |
Partitioning Support [PARTITIONING_SUPPORT]: 0x07 | |
Device support partitioning feature | |
Device can have enhanced tech. | |
Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x0001d2 | |
i.e. 3817472 KiB | |
Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00 | |
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 | |
Device partition setting NOT complete | |
General Purpose Partition Size | |
[GP_SIZE_MULT_4]: 0x000000 | |
[GP_SIZE_MULT_3]: 0x000000 | |
[GP_SIZE_MULT_2]: 0x000000 | |
[GP_SIZE_MULT_1]: 0x000000 | |
Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000 | |
i.e. 0 KiB | |
Enhanced User Data Start Address [ENH_START_ADDR]: 0x00000000 | |
i.e. 0 bytes offset | |
Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00 | |
Periodic Wake-up [PERIODIC_WAKEUP]: 0x00 | |
Program CID/CSD in DDR mode support [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x01 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[127]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[126]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[125]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[124]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[123]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[122]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[121]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[120]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[119]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[118]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[117]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[116]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[115]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[114]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[113]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[112]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[111]]: 0x02 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[110]]: 0xf5 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[109]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[108]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[107]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[106]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[105]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[104]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[103]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[102]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[101]]: 0x05 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[100]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[99]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[98]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[97]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[96]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[95]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[94]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[93]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[92]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[91]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[90]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[89]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[88]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[87]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[86]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[85]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[84]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[83]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[82]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[81]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[80]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[79]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[78]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[77]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[76]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[75]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[74]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[73]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[72]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[71]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[70]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[69]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[68]]: 0xc8 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[67]]: 0xc9 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[66]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[65]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[64]]: 0x0f | |
Native sector size [NATIVE_SECTOR_SIZE]: 0x00 | |
Sector size emulation [USE_NATIVE_SECTOR]: 0x00 | |
Sector size [DATA_SECTOR_SIZE]: 0x00 | |
1st initialization after disabling sector size emulation [INI_TIMEOUT_EMU]: 0x00 | |
Class 6 commands control [CLASS_6_CTRL]: 0x00 | |
Number of addressed group to be Released[DYNCAP_NEEDED]: 0x00 | |
Exception events control [EXCEPTION_EVENTS_CTRL]: 0x0000 | |
Exception events status[EXCEPTION_EVENTS_STATUS]: 0x0000 | |
Extended Partitions Attribute [EXT_PARTITIONS_ATTRIBUTE]: 0x0000 | |
Context configuration [CONTEXT_CONF[51]]: 0x00 | |
Context configuration [CONTEXT_CONF[50]]: 0x00 | |
Context configuration [CONTEXT_CONF[49]]: 0x00 | |
Context configuration [CONTEXT_CONF[48]]: 0x00 | |
Context configuration [CONTEXT_CONF[47]]: 0x00 | |
Context configuration [CONTEXT_CONF[46]]: 0x00 | |
Context configuration [CONTEXT_CONF[45]]: 0x00 | |
Context configuration [CONTEXT_CONF[44]]: 0x00 | |
Context configuration [CONTEXT_CONF[43]]: 0x00 | |
Context configuration [CONTEXT_CONF[42]]: 0x00 | |
Context configuration [CONTEXT_CONF[41]]: 0x00 | |
Context configuration [CONTEXT_CONF[40]]: 0x00 | |
Context configuration [CONTEXT_CONF[39]]: 0x00 | |
Context configuration [CONTEXT_CONF[38]]: 0x00 | |
Context configuration [CONTEXT_CONF[37]]: 0x00 | |
Packed command status [PACKED_COMMAND_STATUS]: 0x00 | |
Packed command failure index [PACKED_FAILURE_INDEX]: 0x00 | |
Power Off Notification [POWER_OFF_NOTIFICATION]: 0x01 | |
Control to turn the Cache ON/OFF [CACHE_CTRL]: 0x01 | |
eMMC Firmware Version: | |
eMMC Life Time Estimation A [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A]: 0x01 | |
eMMC Life Time Estimation B [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B]: 0x01 | |
eMMC Pre EOL information [EXT_CSD_PRE_EOL_INFO]: 0x01 | |
Command Queue Support [CMDQ_SUPPORT]: 0x00 | |
Command Queue Depth [CMDQ_DEPTH]: 1 | |
Command Enabled [CMDQ_MODE_EN]: 0x00 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
============================================= | |
Extended CSD rev 1.8 (MMC 5.1) | |
============================================= | |
Card Supported Command sets [S_CMD_SET: 0x01] | |
HPI Features [HPI_FEATURE: 0x01]: implementation based on CMD13 | |
Background operations support [BKOPS_SUPPORT: 0x01] | |
Max Packet Read Cmd [MAX_PACKED_READS: 0x3f] | |
Max Packet Write Cmd [MAX_PACKED_WRITES: 0x3f] | |
Data TAG support [DATA_TAG_SUPPORT: 0x01] | |
Data TAG Unit Size [TAG_UNIT_SIZE: 0x03] | |
Tag Resources Size [TAG_RES_SIZE: 0x00] | |
Context Management Capabilities [CONTEXT_CAPABILITIES: 0x05] | |
Large Unit Size [LARGE_UNIT_SIZE_M1: 0x07] | |
Extended partition attribute support [EXT_SUPPORT: 0x03] | |
Generic CMD6 Timer [GENERIC_CMD6_TIME: 0x0a] | |
Power off notification [POWER_OFF_LONG_TIME: 0x3c] | |
Cache Size [CACHE_SIZE] is 65536 KiB | |
Background operations status [BKOPS_STATUS: 0x00] | |
1st Initialisation Time after programmed sector [INI_TIMEOUT_AP: 0x1e] | |
Power class for 52MHz, DDR at 3.6V [PWR_CL_DDR_52_360: 0x00] | |
Power class for 52MHz, DDR at 1.95V [PWR_CL_DDR_52_195: 0x00] | |
Power class for 200MHz at 3.6V [PWR_CL_200_360: 0x00] | |
Power class for 200MHz, at 1.95V [PWR_CL_200_195: 0x00] | |
Minimum Performance for 8bit at 52MHz in DDR mode: | |
[MIN_PERF_DDR_W_8_52: 0x00] | |
[MIN_PERF_DDR_R_8_52: 0x00] | |
TRIM Multiplier [TRIM_MULT: 0x02] | |
Secure Feature support [SEC_FEATURE_SUPPORT: 0x55] | |
Boot Information [BOOT_INFO: 0x07] | |
Device supports alternative boot method | |
Device supports dual data rate during boot | |
Device supports high speed timing during boot | |
Boot partition size [BOOT_SIZE_MULTI: 0x20] | |
Access size [ACC_SIZE: 0x07] | |
High-capacity erase unit size [HC_ERASE_GRP_SIZE: 0x01] | |
i.e. 512 KiB | |
High-capacity erase timeout [ERASE_TIMEOUT_MULT: 0x01] | |
Reliable write sector count [REL_WR_SEC_C: 0x01] | |
High-capacity W protect group size [HC_WP_GRP_SIZE: 0x10] | |
i.e. 8192 KiB | |
Sleep current (VCC) [S_C_VCC: 0x07] | |
Sleep current (VCCQ) [S_C_VCCQ: 0x07] | |
Sleep/awake timeout [S_A_TIMEOUT: 0x11] | |
Sector Count [SEC_COUNT: 0x00e90000] | |
Device is block-addressed | |
Minimum Write Performance for 8bit: | |
[MIN_PERF_W_8_52: 0x00] | |
[MIN_PERF_R_8_52: 0x00] | |
[MIN_PERF_W_8_26_4_52: 0x00] | |
[MIN_PERF_R_8_26_4_52: 0x00] | |
Minimum Write Performance for 4bit: | |
[MIN_PERF_W_4_26: 0x00] | |
[MIN_PERF_R_4_26: 0x00] | |
Power classes registers: | |
[PWR_CL_26_360: 0x00] | |
[PWR_CL_52_360: 0x00] | |
[PWR_CL_26_195: 0x00] | |
[PWR_CL_52_195: 0x00] | |
Partition switching timing [PARTITION_SWITCH_TIME: 0x01] | |
Out-of-interrupt busy timing [OUT_OF_INTERRUPT_TIME: 0x05] | |
I/O Driver Strength [DRIVER_STRENGTH: 0x1f] | |
Card Type [CARD_TYPE: 0x57] | |
HS200 Single Data Rate eMMC @200MHz 1.8VI/O | |
HS Dual Data Rate eMMC @52MHz 1.8V or 3VI/O | |
HS eMMC @52MHz - at rated device voltage(s) | |
HS eMMC @26MHz - at rated device voltage(s) | |
CSD structure version [CSD_STRUCTURE: 0x02] | |
Command set [CMD_SET: 0x00] | |
Command set revision [CMD_SET_REV: 0x00] | |
Power class [POWER_CLASS: 0x00] | |
High-speed interface timing [HS_TIMING: 0x02] | |
Erased memory content [ERASED_MEM_CONT: 0x00] | |
Boot configuration bytes [PARTITION_CONFIG: 0x00] | |
Not boot enable | |
No access to boot partition | |
Boot config protection [BOOT_CONFIG_PROT: 0x00] | |
Boot bus Conditions [BOOT_BUS_CONDITIONS: 0x00] | |
High-density erase group definition [ERASE_GROUP_DEF: 0x01] | |
Boot write protection status registers [BOOT_WP_STATUS]: 0x00 | |
Boot Area Write protection [BOOT_WP]: 0x00 | |
Power ro locking: possible | |
Permanent ro locking: possible | |
ro lock status: not locked | |
User area write protection register [USER_WP]: 0x00 | |
FW configuration [FW_CONFIG]: 0x00 | |
RPMB Size [RPMB_SIZE_MULT]: 0x04 | |
Write reliability setting register [WR_REL_SET]: 0x1f | |
user area: the device protects existing data if a power failure occurs during a write operation | |
partition 1: the device protects existing data if a power failure occurs during a write operation | |
partition 2: the device protects existing data if a power failure occurs during a write operation | |
partition 3: the device protects existing data if a power failure occurs during a write operation | |
partition 4: the device protects existing data if a power failure occurs during a write operation | |
Write reliability parameter register [WR_REL_PARAM]: 0x04 | |
Device supports the enhanced def. of reliable write | |
Enable background operations handshake [BKOPS_EN]: 0x00 | |
H/W reset function [RST_N_FUNCTION]: 0x01 | |
HPI management [HPI_MGMT]: 0x01 | |
Partitioning Support [PARTITIONING_SUPPORT]: 0x07 | |
Device support partitioning feature | |
Device can have enhanced tech. | |
Max Enhanced Area Size [MAX_ENH_SIZE_MULT]: 0x0001d2 | |
i.e. 3817472 KiB | |
Partitions attribute [PARTITIONS_ATTRIBUTE]: 0x00 | |
Partitioning Setting [PARTITION_SETTING_COMPLETED]: 0x00 | |
Device partition setting NOT complete | |
General Purpose Partition Size | |
[GP_SIZE_MULT_4]: 0x000000 | |
[GP_SIZE_MULT_3]: 0x000000 | |
[GP_SIZE_MULT_2]: 0x000000 | |
[GP_SIZE_MULT_1]: 0x000000 | |
Enhanced User Data Area Size [ENH_SIZE_MULT]: 0x000000 | |
i.e. 0 KiB | |
Enhanced User Data Start Address [ENH_START_ADDR]: 0x00000000 | |
i.e. 0 bytes offset | |
Bad Block Management mode [SEC_BAD_BLK_MGMNT]: 0x00 | |
Periodic Wake-up [PERIODIC_WAKEUP]: 0x00 | |
Program CID/CSD in DDR mode support [PROGRAM_CID_CSD_DDR_SUPPORT]: 0x01 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[127]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[126]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[125]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[124]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[123]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[122]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[121]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[120]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[119]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[118]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[117]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[116]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[115]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[114]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[113]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[112]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[111]]: 0x04 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[110]]: 0x22 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[109]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[108]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[107]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[106]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[105]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[104]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[103]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[102]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[101]]: 0x05 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[100]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[99]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[98]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[97]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[96]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[95]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[94]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[93]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[92]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[91]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[90]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[89]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[88]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[87]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[86]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[85]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[84]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[83]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[82]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[81]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[80]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[79]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[78]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[77]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[76]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[75]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[74]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[73]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[72]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[71]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[70]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[69]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[68]]: 0xc8 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[67]]: 0xc9 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[66]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[65]]: 0x00 | |
Vendor Specific Fields [VENDOR_SPECIFIC_FIELD[64]]: 0x0f | |
Native sector size [NATIVE_SECTOR_SIZE]: 0x00 | |
Sector size emulation [USE_NATIVE_SECTOR]: 0x00 | |
Sector size [DATA_SECTOR_SIZE]: 0x00 | |
1st initialization after disabling sector size emulation [INI_TIMEOUT_EMU]: 0x00 | |
Class 6 commands control [CLASS_6_CTRL]: 0x00 | |
Number of addressed group to be Released[DYNCAP_NEEDED]: 0x00 | |
Exception events control [EXCEPTION_EVENTS_CTRL]: 0x0000 | |
Exception events status[EXCEPTION_EVENTS_STATUS]: 0x0000 | |
Extended Partitions Attribute [EXT_PARTITIONS_ATTRIBUTE]: 0x0000 | |
Context configuration [CONTEXT_CONF[51]]: 0x00 | |
Context configuration [CONTEXT_CONF[50]]: 0x00 | |
Context configuration [CONTEXT_CONF[49]]: 0x00 | |
Context configuration [CONTEXT_CONF[48]]: 0x00 | |
Context configuration [CONTEXT_CONF[47]]: 0x00 | |
Context configuration [CONTEXT_CONF[46]]: 0x00 | |
Context configuration [CONTEXT_CONF[45]]: 0x00 | |
Context configuration [CONTEXT_CONF[44]]: 0x00 | |
Context configuration [CONTEXT_CONF[43]]: 0x00 | |
Context configuration [CONTEXT_CONF[42]]: 0x00 | |
Context configuration [CONTEXT_CONF[41]]: 0x00 | |
Context configuration [CONTEXT_CONF[40]]: 0x00 | |
Context configuration [CONTEXT_CONF[39]]: 0x00 | |
Context configuration [CONTEXT_CONF[38]]: 0x00 | |
Context configuration [CONTEXT_CONF[37]]: 0x00 | |
Packed command status [PACKED_COMMAND_STATUS]: 0x00 | |
Packed command failure index [PACKED_FAILURE_INDEX]: 0x00 | |
Power Off Notification [POWER_OFF_NOTIFICATION]: 0x01 | |
Control to turn the Cache ON/OFF [CACHE_CTRL]: 0x01 | |
eMMC Firmware Version: | |
eMMC Life Time Estimation A [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_A]: 0x01 | |
eMMC Life Time Estimation B [EXT_CSD_DEVICE_LIFE_TIME_EST_TYP_B]: 0x01 | |
eMMC Pre EOL information [EXT_CSD_PRE_EOL_INFO]: 0x01 | |
Command Queue Support [CMDQ_SUPPORT]: 0x00 | |
Command Queue Depth [CMDQ_DEPTH]: 1 | |
Command Enabled [CMDQ_MODE_EN]: 0x00 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment