-
-
Save evenwebb/547f88db21cb30745c2267499225b7a5 to your computer and use it in GitHub Desktop.
unRAID - automatically move photos to array, different scripts for different cameras.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin | |
| ## Usage (after configuration): | |
| ## 1. Insert camera's memory card into a USB port on your unRAID system | |
| ## 2. The system will automatically move (or copy) any images/videos from the memory card to the array | |
| ## If jhead was installed, it will automatically rotate images according to the exif data | |
| ## 3. Wait for the imperial theme to play, then remove the memory card | |
| ## Preparation: | |
| ## 1. Install jhead (to automatically rotate photos) using the Nerd Pack plugin | |
| ## 2. Install the "Unassigned Devices" plugin | |
| ## 3. Use that plugin to set this script to run *in the background* when a memory card is inserted | |
| ## 4. Configure variables in this script as described below | |
| ## --- BEGIN CONFIGURATION --- | |
| ## SET THIS FOR YOUR CAMERAS: | |
| ## array of directories under /DCIM/ that contain files you want to move (or copy) | |
| ## can contain regex | |
| VALIDDIRS=("/DCIM/[0-9][0-9][0-9]___[0-9][0-9]" "/DCIM/[0-9][0-9][0-9]CANON" "/DCIM/[0-9][0-9][0-9]_FUJI" "/DCIM/[0-9][0-9][0-9]MEDIA" "/DCIM/[0-9][0-9][0-9]GOPRO") | |
| ## SET THIS FOR YOUR SYSTEM: | |
| ## location to move files to. use date command to ensure unique dir | |
| DESTINATION="/mnt/user/Photos/New/ToSort/$(date +"%Y")/$(date +"%m")/$(date +"%d")/" | |
| ## SET THIS FOR YOUR SYSTEM: | |
| ## change to "move" when you are confident everything is working | |
| MOVE_OR_COPY="copy" | |
| ## set this to 1 and check the syslog for additional debugging info | |
| DEBUG="" | |
| ## Available variables: | |
| # AVAIL : available space | |
| # USED : used space | |
| # SIZE : partition size | |
| # SERIAL : disk serial number | |
| # ACTION : if mounting, ADD; if unmounting, REMOVE | |
| # MOUNTPOINT : where the partition is mounted | |
| # FSTYPE : partition filesystem | |
| # LABEL : partition label | |
| # DEVICE : partition device, e.g /dev/sda1 | |
| # OWNER : "udev" if executed by UDEV, otherwise "user" | |
| # PROG_NAME : program name of this script | |
| # LOGFILE : log file for this script | |
| log_all() { | |
| log_local "$1" | |
| logger "$PROG_NAME-$1" | |
| } | |
| log_local() { | |
| echo "`date` $PROG_NAME-$1" | |
| echo "`date` $PROG_NAME-$1" >> $LOGFILE | |
| } | |
| log_debug() { | |
| if [ ${DEBUG} ] | |
| then | |
| log_local "$1" | |
| fi | |
| } | |
| beep_imperial() { | |
| for i in $(seq 1 ${1}); do | |
| beep -f 392 -l 450 -r 3 -D 150 -n -f 311.13 -l 400 -D 50 \ | |
| -n -f 466.16 -l 100 -D 50 -n -f 392 -l 500 -D 100 \ | |
| -n -f 311.13 -l 400 -D 50 -n -f 466.16 -l 100 -D 50 \ | |
| -n -f 392 -l 600 -D 600 -n -f 587.33 -l 450 -r 3 -D 150 \ | |
| -n -f 622.25 -l 400 -D 50 -n -f 466.16 -l 100 -D 50 \ | |
| -n -f 369.99 -l 500 -D 100 -n -f 311.13 -l 400 -D 50 \ | |
| -n -f 466.16 -l 100 -D 50 -n -f 392 -l 500 -D 100 | |
| sleep 2 | |
| done | |
| } | |
| case $ACTION in | |
| 'ADD' ) | |
| # | |
| # Beep that the device is plugged in. | |
| # | |
| beep -l 200 -f 600 -n -l 200 -f 800 | |
| sleep 2 | |
| if [ -d $MOUNTPOINT ] | |
| then | |
| if [ "$OWNER" = "udev" ] | |
| then | |
| log_all "Started" | |
| log_debug "Logging to $LOGFILE" | |
| RSYNCFLAG="" | |
| MOVEMSG="copying" | |
| if [ ${MOVE_OR_COPY} == "move" ] | |
| then | |
| RSYNCFLAG=" --remove-source-files " | |
| MOVEMSG="moving" | |
| fi | |
| # only operate on USB disks that contain a /DCIM directory, everything else will simply be mounted | |
| if [ -d "${MOUNTPOINT}/DCIM" ] | |
| then | |
| log_debug "DCIM exists ${MOUNTPOINT}/DCIM" | |
| # loop through all the subdirs in /DCIM looking for dirs defined in VALIDDIRS | |
| for DIR in ${MOUNTPOINT}/DCIM/*; do | |
| if [ -d "${DIR}" ]; then | |
| log_debug "checking ${DIR}" | |
| for element in "${VALIDDIRS[@]}"; do | |
| if [[ ${DIR} =~ ${element} ]]; then | |
| # process this dir | |
| log_local "${MOVEMSG} ${DIR}/ to ${DESTINATION}" | |
| rsync -a ${RSYNCFLAG} "${DIR}/" "${DESTINATION}" | |
| # remove empty directory from memory card | |
| if [ ${MOVE_OR_COPY} == "move" ]; then | |
| rmdir ${DIR} | |
| fi | |
| fi | |
| done | |
| fi | |
| done | |
| # files were moved (or copied). rotate images, fix permissions | |
| if [ -d "${DESTINATION}" ]; then | |
| if [ -e "/usr/bin/jhead" -a -e "/usr/bin/jpegtran" ]; then | |
| log_debug "running jhead on ${DESTINATION}" | |
| jhead -autorot -ft "${DESTINATION}"*.[jJ][pP][gG] | |
| fi | |
| log_debug "fixing permissions on ${DESTINATION}" | |
| newperms "${DESTINATION}" | |
| fi | |
| # sync and unmount USB drive | |
| sync | |
| /usr/local/sbin/rc.unassigned umount $DEVICE | |
| # send notification | |
| beep_imperial 1 | |
| /usr/local/emhttp/webGui/scripts/notify -e "unRAID Server Notice" -s "Photo Import" -d "Photo Import completed" -i "normal" | |
| fi # end check for DCIM directory | |
| else | |
| log_all "Photo Import drive not processed, owner is $OWNER" | |
| fi # end check for valid owner | |
| else | |
| log_all "Mountpoint doesn't exist $MOUNTPOINT" | |
| fi # end check for valid mountpoint | |
| ;; | |
| 'REMOVE' ) | |
| # | |
| # Beep that the device is unmounted. | |
| # | |
| beep -l 200 -f 800 -n -l 200 -f 600 | |
| log_all "Photo Import drive unmounted, can safely be removed" | |
| ;; | |
| esac |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin | |
| ## Usage (after configuration): | |
| ## 1. Insert camera's memory card into a USB port on your unRAID system | |
| ## 2. The system will automatically move (or copy) any images/videos from the memory card to the array | |
| ## If jhead was installed, it will automatically rotate images according to the exif data | |
| ## 3. Wait for the imperial theme to play, then remove the memory card | |
| ## Preparation: | |
| ## 1. Install jhead (to automatically rotate photos) using the Nerd Pack plugin | |
| ## 2. Install the "Unassigned Devices" plugin | |
| ## 3. Use that plugin to set this script to run *in the background* when a memory card is inserted | |
| ## 4. Configure variables in this script as described below | |
| ## --- BEGIN CONFIGURATION --- | |
| ## SET THIS FOR YOUR CAMERAS: | |
| ## array of directories under /DCIM/ that contain files you want to move (or copy) | |
| ## can contain regex | |
| VALIDDIRS=("/DCIM/[0-9][0-9][0-9]___[0-9][0-9]" "/DCIM/[0-9][0-9][0-9]CANON") | |
| ## SET THIS FOR YOUR SYSTEM: | |
| ## location to move files to. use date command to ensure unique dir | |
| DESTINATION="/mnt/user/Photos/New/Sorted/Canon\ EOS\ 650D/$(date +"%Y")/$(date +"%m")/$(date +"%d")/" | |
| ## SET THIS FOR YOUR SYSTEM: | |
| ## change to "move" when you are confident everything is working | |
| MOVE_OR_COPY="copy" | |
| ## set this to 1 and check the syslog for additional debugging info | |
| DEBUG="" | |
| ## Available variables: | |
| # AVAIL : available space | |
| # USED : used space | |
| # SIZE : partition size | |
| # SERIAL : disk serial number | |
| # ACTION : if mounting, ADD; if unmounting, REMOVE | |
| # MOUNTPOINT : where the partition is mounted | |
| # FSTYPE : partition filesystem | |
| # LABEL : partition label | |
| # DEVICE : partition device, e.g /dev/sda1 | |
| # OWNER : "udev" if executed by UDEV, otherwise "user" | |
| # PROG_NAME : program name of this script | |
| # LOGFILE : log file for this script | |
| log_all() { | |
| log_local "$1" | |
| logger "$PROG_NAME-$1" | |
| } | |
| log_local() { | |
| echo "`date` $PROG_NAME-$1" | |
| echo "`date` $PROG_NAME-$1" >> $LOGFILE | |
| } | |
| log_debug() { | |
| if [ ${DEBUG} ] | |
| then | |
| log_local "$1" | |
| fi | |
| } | |
| beep_imperial() { | |
| for i in $(seq 1 ${1}); do | |
| beep -f 392 -l 450 -r 3 -D 150 -n -f 311.13 -l 400 -D 50 \ | |
| -n -f 466.16 -l 100 -D 50 -n -f 392 -l 500 -D 100 \ | |
| -n -f 311.13 -l 400 -D 50 -n -f 466.16 -l 100 -D 50 \ | |
| -n -f 392 -l 600 -D 600 -n -f 587.33 -l 450 -r 3 -D 150 \ | |
| -n -f 622.25 -l 400 -D 50 -n -f 466.16 -l 100 -D 50 \ | |
| -n -f 369.99 -l 500 -D 100 -n -f 311.13 -l 400 -D 50 \ | |
| -n -f 466.16 -l 100 -D 50 -n -f 392 -l 500 -D 100 | |
| sleep 2 | |
| done | |
| } | |
| case $ACTION in | |
| 'ADD' ) | |
| # | |
| # Beep that the device is plugged in. | |
| # | |
| beep -l 200 -f 600 -n -l 200 -f 800 | |
| sleep 2 | |
| if [ -d $MOUNTPOINT ] | |
| then | |
| if [ "$OWNER" = "udev" ] | |
| then | |
| log_all "Started" | |
| log_debug "Logging to $LOGFILE" | |
| RSYNCFLAG="" | |
| MOVEMSG="copying" | |
| if [ ${MOVE_OR_COPY} == "move" ] | |
| then | |
| RSYNCFLAG=" --remove-source-files " | |
| MOVEMSG="moving" | |
| fi | |
| # only operate on USB disks that contain a /DCIM directory, everything else will simply be mounted | |
| if [ -d "${MOUNTPOINT}/DCIM" ] | |
| then | |
| log_debug "DCIM exists ${MOUNTPOINT}/DCIM" | |
| # loop through all the subdirs in /DCIM looking for dirs defined in VALIDDIRS | |
| for DIR in ${MOUNTPOINT}/DCIM/*; do | |
| if [ -d "${DIR}" ]; then | |
| log_debug "checking ${DIR}" | |
| for element in "${VALIDDIRS[@]}"; do | |
| if [[ ${DIR} =~ ${element} ]]; then | |
| # process this dir | |
| log_local "${MOVEMSG} ${DIR}/ to ${DESTINATION}" | |
| rsync -a ${RSYNCFLAG} "${DIR}/" "${DESTINATION}" | |
| # remove empty directory from memory card | |
| if [ ${MOVE_OR_COPY} == "move" ]; then | |
| rmdir ${DIR} | |
| fi | |
| fi | |
| done | |
| fi | |
| done | |
| # files were moved (or copied). rotate images, fix permissions | |
| if [ -d "${DESTINATION}" ]; then | |
| if [ -e "/usr/bin/jhead" -a -e "/usr/bin/jpegtran" ]; then | |
| log_debug "running jhead on ${DESTINATION}" | |
| jhead -autorot -ft "${DESTINATION}"*.[jJ][pP][gG] | |
| fi | |
| log_debug "fixing permissions on ${DESTINATION}" | |
| newperms "${DESTINATION}" | |
| fi | |
| # sync and unmount USB drive | |
| sync | |
| /usr/local/sbin/rc.unassigned umount $DEVICE | |
| # send notification | |
| beep_imperial 1 | |
| /usr/local/emhttp/webGui/scripts/notify -e "unRAID Server Notice" -s "Photo Import" -d "Photo Import completed" -i "normal" | |
| fi # end check for DCIM directory | |
| else | |
| log_all "Photo Import drive not processed, owner is $OWNER" | |
| fi # end check for valid owner | |
| else | |
| log_all "Mountpoint doesn't exist $MOUNTPOINT" | |
| fi # end check for valid mountpoint | |
| ;; | |
| 'REMOVE' ) | |
| # | |
| # Beep that the device is unmounted. | |
| # | |
| beep -l 200 -f 800 -n -l 200 -f 600 | |
| log_all "Photo Import drive unmounted, can safely be removed" | |
| ;; | |
| esac |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin | |
| ## Usage (after configuration): | |
| ## 1. Insert camera's memory card into a USB port on your unRAID system | |
| ## 2. The system will automatically move (or copy) any images/videos from the memory card to the array | |
| ## If jhead was installed, it will automatically rotate images according to the exif data | |
| ## 3. Wait for the imperial theme to play, then remove the memory card | |
| ## Preparation: | |
| ## 1. Install jhead (to automatically rotate photos) using the Nerd Pack plugin | |
| ## 2. Install the "Unassigned Devices" plugin | |
| ## 3. Use that plugin to set this script to run *in the background* when a memory card is inserted | |
| ## 4. Configure variables in this script as described below | |
| ## --- BEGIN CONFIGURATION --- | |
| ## SET THIS FOR YOUR CAMERAS: | |
| ## array of directories under /DCIM/ that contain files you want to move (or copy) | |
| ## can contain regex | |
| VALIDDIRS=("/DCIM/[0-9][0-9][0-9]___[0-9][0-9]" "/DCIM/[0-9][0-9][0-9]GOPRO") | |
| ## SET THIS FOR YOUR SYSTEM: | |
| ## location to move files to. use date command to ensure unique dir | |
| DESTINATION="/mnt/user/Photos/New/Sorted/HERO4\ Black/$(date +"%Y")/$(date +"%m")/$(date +"%d")/" | |
| ## SET THIS FOR YOUR SYSTEM: | |
| ## change to "move" when you are confident everything is working | |
| MOVE_OR_COPY="copy" | |
| ## set this to 1 and check the syslog for additional debugging info | |
| DEBUG="" | |
| ## Available variables: | |
| # AVAIL : available space | |
| # USED : used space | |
| # SIZE : partition size | |
| # SERIAL : disk serial number | |
| # ACTION : if mounting, ADD; if unmounting, REMOVE | |
| # MOUNTPOINT : where the partition is mounted | |
| # FSTYPE : partition filesystem | |
| # LABEL : partition label | |
| # DEVICE : partition device, e.g /dev/sda1 | |
| # OWNER : "udev" if executed by UDEV, otherwise "user" | |
| # PROG_NAME : program name of this script | |
| # LOGFILE : log file for this script | |
| log_all() { | |
| log_local "$1" | |
| logger "$PROG_NAME-$1" | |
| } | |
| log_local() { | |
| echo "`date` $PROG_NAME-$1" | |
| echo "`date` $PROG_NAME-$1" >> $LOGFILE | |
| } | |
| log_debug() { | |
| if [ ${DEBUG} ] | |
| then | |
| log_local "$1" | |
| fi | |
| } | |
| beep_imperial() { | |
| for i in $(seq 1 ${1}); do | |
| beep -f 392 -l 450 -r 3 -D 150 -n -f 311.13 -l 400 -D 50 \ | |
| -n -f 466.16 -l 100 -D 50 -n -f 392 -l 500 -D 100 \ | |
| -n -f 311.13 -l 400 -D 50 -n -f 466.16 -l 100 -D 50 \ | |
| -n -f 392 -l 600 -D 600 -n -f 587.33 -l 450 -r 3 -D 150 \ | |
| -n -f 622.25 -l 400 -D 50 -n -f 466.16 -l 100 -D 50 \ | |
| -n -f 369.99 -l 500 -D 100 -n -f 311.13 -l 400 -D 50 \ | |
| -n -f 466.16 -l 100 -D 50 -n -f 392 -l 500 -D 100 | |
| sleep 2 | |
| done | |
| } | |
| case $ACTION in | |
| 'ADD' ) | |
| # | |
| # Beep that the device is plugged in. | |
| # | |
| beep -l 200 -f 600 -n -l 200 -f 800 | |
| sleep 2 | |
| if [ -d $MOUNTPOINT ] | |
| then | |
| if [ "$OWNER" = "udev" ] | |
| then | |
| log_all "Started" | |
| log_debug "Logging to $LOGFILE" | |
| RSYNCFLAG="" | |
| MOVEMSG="copying" | |
| if [ ${MOVE_OR_COPY} == "move" ] | |
| then | |
| RSYNCFLAG=" --remove-source-files " | |
| MOVEMSG="moving" | |
| fi | |
| # only operate on USB disks that contain a /DCIM directory, everything else will simply be mounted | |
| if [ -d "${MOUNTPOINT}/DCIM" ] | |
| then | |
| log_debug "DCIM exists ${MOUNTPOINT}/DCIM" | |
| # loop through all the subdirs in /DCIM looking for dirs defined in VALIDDIRS | |
| for DIR in ${MOUNTPOINT}/DCIM/*; do | |
| if [ -d "${DIR}" ]; then | |
| log_debug "checking ${DIR}" | |
| for element in "${VALIDDIRS[@]}"; do | |
| if [[ ${DIR} =~ ${element} ]]; then | |
| # process this dir | |
| log_local "${MOVEMSG} ${DIR}/ to ${DESTINATION}" | |
| rsync -a ${RSYNCFLAG} "${DIR}/" "${DESTINATION}" | |
| # remove empty directory from memory card | |
| if [ ${MOVE_OR_COPY} == "move" ]; then | |
| rmdir ${DIR} | |
| fi | |
| fi | |
| done | |
| fi | |
| done | |
| # files were moved (or copied). rotate images, fix permissions | |
| if [ -d "${DESTINATION}" ]; then | |
| if [ -e "/usr/bin/jhead" -a -e "/usr/bin/jpegtran" ]; then | |
| log_debug "running jhead on ${DESTINATION}" | |
| jhead -autorot -ft "${DESTINATION}"*.[jJ][pP][gG] | |
| fi | |
| log_debug "fixing permissions on ${DESTINATION}" | |
| newperms "${DESTINATION}" | |
| fi | |
| # sync and unmount USB drive | |
| sync | |
| /usr/local/sbin/rc.unassigned umount $DEVICE | |
| # send notification | |
| beep_imperial 1 | |
| /usr/local/emhttp/webGui/scripts/notify -e "unRAID Server Notice" -s "Photo Import" -d "Photo Import completed" -i "normal" | |
| fi # end check for DCIM directory | |
| else | |
| log_all "Photo Import drive not processed, owner is $OWNER" | |
| fi # end check for valid owner | |
| else | |
| log_all "Mountpoint doesn't exist $MOUNTPOINT" | |
| fi # end check for valid mountpoint | |
| ;; | |
| 'REMOVE' ) | |
| # | |
| # Beep that the device is unmounted. | |
| # | |
| beep -l 200 -f 800 -n -l 200 -f 600 | |
| log_all "Photo Import drive unmounted, can safely be removed" | |
| ;; | |
| esac |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| #!/bin/bash | |
| PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin | |
| ## Usage (after configuration): | |
| ## 1. Insert camera's memory card into a USB port on your unRAID system | |
| ## 2. The system will automatically move (or copy) any images/videos from the memory card to the array | |
| ## If jhead was installed, it will automatically rotate images according to the exif data | |
| ## 3. Wait for the imperial theme to play, then remove the memory card | |
| ## Preparation: | |
| ## 1. Install jhead (to automatically rotate photos) using the Nerd Pack plugin | |
| ## 2. Install the "Unassigned Devices" plugin | |
| ## 3. Use that plugin to set this script to run *in the background* when a memory card is inserted | |
| ## 4. Configure variables in this script as described below | |
| ## --- BEGIN CONFIGURATION --- | |
| ## SET THIS FOR YOUR CAMERAS: | |
| ## array of directories under /DCIM/ that contain files you want to move (or copy) | |
| ## can contain regex | |
| VALIDDIRS=("/DCIM/[0-9][0-9][0-9]___[0-9][0-9]" "/DCIM/[0-9][0-9][0-9]MEDIA") | |
| ## SET THIS FOR YOUR SYSTEM: | |
| ## location to move files to. use date command to ensure unique dir | |
| DESTINATION="/mnt/user/Photos/New/Sorted/DJI\ Mavic\ Pro\ -\ FC220/$(date +"%Y")/$(date +"%m")/$(date +"%d")/" | |
| ## SET THIS FOR YOUR SYSTEM: | |
| ## change to "move" when you are confident everything is working | |
| MOVE_OR_COPY="copy" | |
| ## set this to 1 and check the syslog for additional debugging info | |
| DEBUG="" | |
| ## Available variables: | |
| # AVAIL : available space | |
| # USED : used space | |
| # SIZE : partition size | |
| # SERIAL : disk serial number | |
| # ACTION : if mounting, ADD; if unmounting, REMOVE | |
| # MOUNTPOINT : where the partition is mounted | |
| # FSTYPE : partition filesystem | |
| # LABEL : partition label | |
| # DEVICE : partition device, e.g /dev/sda1 | |
| # OWNER : "udev" if executed by UDEV, otherwise "user" | |
| # PROG_NAME : program name of this script | |
| # LOGFILE : log file for this script | |
| log_all() { | |
| log_local "$1" | |
| logger "$PROG_NAME-$1" | |
| } | |
| log_local() { | |
| echo "`date` $PROG_NAME-$1" | |
| echo "`date` $PROG_NAME-$1" >> $LOGFILE | |
| } | |
| log_debug() { | |
| if [ ${DEBUG} ] | |
| then | |
| log_local "$1" | |
| fi | |
| } | |
| beep_imperial() { | |
| for i in $(seq 1 ${1}); do | |
| beep -f 392 -l 450 -r 3 -D 150 -n -f 311.13 -l 400 -D 50 \ | |
| -n -f 466.16 -l 100 -D 50 -n -f 392 -l 500 -D 100 \ | |
| -n -f 311.13 -l 400 -D 50 -n -f 466.16 -l 100 -D 50 \ | |
| -n -f 392 -l 600 -D 600 -n -f 587.33 -l 450 -r 3 -D 150 \ | |
| -n -f 622.25 -l 400 -D 50 -n -f 466.16 -l 100 -D 50 \ | |
| -n -f 369.99 -l 500 -D 100 -n -f 311.13 -l 400 -D 50 \ | |
| -n -f 466.16 -l 100 -D 50 -n -f 392 -l 500 -D 100 | |
| sleep 2 | |
| done | |
| } | |
| case $ACTION in | |
| 'ADD' ) | |
| # | |
| # Beep that the device is plugged in. | |
| # | |
| beep -l 200 -f 600 -n -l 200 -f 800 | |
| sleep 2 | |
| if [ -d $MOUNTPOINT ] | |
| then | |
| if [ "$OWNER" = "udev" ] | |
| then | |
| log_all "Started" | |
| log_debug "Logging to $LOGFILE" | |
| RSYNCFLAG="" | |
| MOVEMSG="copying" | |
| if [ ${MOVE_OR_COPY} == "move" ] | |
| then | |
| RSYNCFLAG=" --remove-source-files " | |
| MOVEMSG="moving" | |
| fi | |
| # only operate on USB disks that contain a /DCIM directory, everything else will simply be mounted | |
| if [ -d "${MOUNTPOINT}/DCIM" ] | |
| then | |
| log_debug "DCIM exists ${MOUNTPOINT}/DCIM" | |
| # loop through all the subdirs in /DCIM looking for dirs defined in VALIDDIRS | |
| for DIR in ${MOUNTPOINT}/DCIM/*; do | |
| if [ -d "${DIR}" ]; then | |
| log_debug "checking ${DIR}" | |
| for element in "${VALIDDIRS[@]}"; do | |
| if [[ ${DIR} =~ ${element} ]]; then | |
| # process this dir | |
| log_local "${MOVEMSG} ${DIR}/ to ${DESTINATION}" | |
| rsync -a ${RSYNCFLAG} "${DIR}/" "${DESTINATION}" | |
| # remove empty directory from memory card | |
| if [ ${MOVE_OR_COPY} == "move" ]; then | |
| rmdir ${DIR} | |
| fi | |
| fi | |
| done | |
| fi | |
| done | |
| # files were moved (or copied). rotate images, fix permissions | |
| if [ -d "${DESTINATION}" ]; then | |
| if [ -e "/usr/bin/jhead" -a -e "/usr/bin/jpegtran" ]; then | |
| log_debug "running jhead on ${DESTINATION}" | |
| jhead -autorot -ft "${DESTINATION}"*.[jJ][pP][gG] | |
| fi | |
| log_debug "fixing permissions on ${DESTINATION}" | |
| newperms "${DESTINATION}" | |
| fi | |
| # sync and unmount USB drive | |
| sync | |
| /usr/local/sbin/rc.unassigned umount $DEVICE | |
| # send notification | |
| beep_imperial 1 | |
| /usr/local/emhttp/webGui/scripts/notify -e "unRAID Server Notice" -s "Photo Import" -d "Photo Import completed" -i "normal" | |
| fi # end check for DCIM directory | |
| else | |
| log_all "Photo Import drive not processed, owner is $OWNER" | |
| fi # end check for valid owner | |
| else | |
| log_all "Mountpoint doesn't exist $MOUNTPOINT" | |
| fi # end check for valid mountpoint | |
| ;; | |
| 'REMOVE' ) | |
| # | |
| # Beep that the device is unmounted. | |
| # | |
| beep -l 200 -f 800 -n -l 200 -f 600 | |
| log_all "Photo Import drive unmounted, can safely be removed" | |
| ;; | |
| esac |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Added support for DJI drones with
"/DCIM/[0-9][0-9][0-9]MEDIA"Thanks to @ljm42 for the great script!