Arduino Star Wars Song

star_wars.ino

const int c = 261;
const int d = 294;
const int e = 329;
const int f = 349;
const int g = 391;
const int gS = 415;
const int a = 440;
const int aS = 455;
const int b = 466;
const int cH = 523;
const int cSH = 554;
const int dH = 587;
const int dSH = 622;
const int eH = 659;
const int fH = 698;
const int fSH = 740;
const int gH = 784;
const int gSH = 830;
const int aH = 880;
 
const int buzzerPin = 8;
const int ledPin1 = 12;
const int ledPin2 = 13;
 
int counter = 0;
 
void setup()
{
  //Setup pin modes
  pinMode(buzzerPin, OUTPUT);
  pinMode(ledPin1, OUTPUT);
  pinMode(ledPin2, OUTPUT);
}
 
void loop()
{
 
  //Play first section
  firstSection();
 
  //Play second section
  secondSection();
 
  beep(f, 250);  
  beep(gS, 500);  
  beep(f, 350);  
  beep(a, 125);
  beep(cH, 500);
  beep(a, 375);  
  beep(cH, 125);
  beep(eH, 650);
 
  delay(500);
 
  //Repeat second section
  secondSection();
 

  beep(f, 250);  
  beep(gS, 500);  
  beep(f, 375);  
  beep(cH, 125);
  beep(a, 500);  
  beep(f, 375);  
  beep(cH, 125);
  beep(a, 650);  
 
  delay(650);
}
 
void beep(int note, int duration)
{
  //Play tone on buzzerPin
  tone(buzzerPin, note, duration);
 
  //Play different LED depending on value of 'counter'
  if(counter % 2 == 0)
  {
    digitalWrite(ledPin1, HIGH);
    delay(duration);
    digitalWrite(ledPin1, LOW);
  }else
  {
    digitalWrite(ledPin2, HIGH);
    delay(duration);
    digitalWrite(ledPin2, LOW);
  }
 
  //Stop tone on buzzerPin
  noTone(buzzerPin);
 
  delay(50);
 
  //Increment counter
  counter++;
}
 
void firstSection()
{
  beep(a, 500);
  beep(a, 500);    
  beep(a, 500);
  beep(f, 350);
  beep(cH, 150);  
  beep(a, 500);
  beep(f, 350);
  beep(cH, 150);
  beep(a, 650);
 
  delay(500);
 
  beep(eH, 500);
  beep(eH, 500);
  beep(eH, 500);  
  beep(fH, 350);
  beep(cH, 150);
  beep(gS, 500);
  beep(f, 350);
  beep(cH, 150);
  beep(a, 650);
 
  delay(500);
}
 
void secondSection()
{
  beep(aH, 500);
  beep(a, 300);
  beep(a, 150);
  beep(aH, 500);
  beep(gSH, 325);
  beep(gH, 175);
  beep(fSH, 125);
  beep(fH, 125);    
  beep(fSH, 250);
 
  delay(325);
 
  beep(aS, 250);
  beep(dSH, 500);
  beep(dH, 325);  
  beep(cSH, 175);  
  beep(cH, 125);  
  beep(b, 125);  
  beep(cH, 250);  
 
  delay(350);
}

Great! Thanks!

yes! :)

Omg, awesome!!!

great job!

Found some errors in the frequencies. Corrected, below:

const int aS = 466;
const int b = 494;

Unbelievable... thank you, that's going in my latest project :-)

so best and useful! ; I used it for making other musics, please add .ino to end of name and remove **/ code for use easier.
but how can u set speed?

magnificent !!
how long did it take for you to make something like this .

does any of you know if there's an online generator of these frequencies? Or would it need to be done by trial and error?

http://pages.mtu.edu/~suits/notefreqs.html This is a link for frequencies!

Thank you!

Thanks 4 the share

Thanks alot!

I made a project that includes your code:
https://youtu.be/0yEIdtyNa0U

Of course I linked your code

big sean approves

I keep getting the error below, any help guys?

exit status 1 'firstSection' was not declared in this scope

I needed try it!!! Thanks you

Great job!!!!! Thumbs up!

Great Work NickSort. A Classic! Thanks.

great, for my son was awesome, Thanks!

damn cool thanks !

Thank you very much for your code. It's Great!

Great!!!

Great job!

Hi I'm rather new to this, how can I adapt this code to incorporate a push button, that will allow it to play the full sequence once per press of the button, then wait until the button is pressed again? I've tried cutting and pasting the push button code segments from the example in the ide software labeled 'Button' but it causes all sorts of errors starting with "'firstsection' was not declared in this scope" can someone give me a basic understanding of how I need to relocate the existing code segments to get them to play nicely? Thanks!

If someone is getting errors when verifying this code, try to delete the very first line:
**/

Hope this helps.

it's make me happy. Thank you very much my friend!!

Thank you so much I have been learning Arduino for the past 4 days so I have been messing around only with LEDs. Now, with this I adapted it and made my Arduino version of Blue Bird. here is the gist for those interested:
https://gist.github.com/Bryniac/0c03831108e087f7aff9148b11be803a

Thank you so much I have been learning Arduino for the past 4 days so I have been messing around only with LEDs. Now, with this I adapted it and made my Arduino version of Blue Bird. here is the gist for those interested: https://gist.github.com/Bryniac/0c03831108e087f7aff9148b11be803a

Thanks for sharing @Bryniac

Thank you