Updated 2023-12-11: Hosts calculation updated to support CIDR or 31 and 32.
Prerequisites:
- A1 contains an IP address, such as 10.0.0.2
- B1 contains the number of bits in the netmask (CIDR) such as 24
The below formulas then go into C1, D1 etc. to perform the various calculations. Some calculations depends on other calculations.
A Google Sheet with all the formulas can be accessed and copied here: https://docs.google.com/spreadsheets/d/1G-vStX0DRB7tq-wvbALnL4HeXYXXOkjh_GriTN-b6-o (Also updated 2023-12-11)
Note, the formulas below are written with the comma spreadsheet notation used in most countries globally. You may need to change the notation to semicolon notation, which is primearly used in the U.S. E.g. =ROUND(PI(),3) and =ROUND(PI();3) are identical but uses different formula notation.
Huge thanks to @6d6163 and @Baribf for pointing out a mistake when used in Excel (The instance_num in Substitute() must not be zero!) and for spotting that the StartIP in a range must be one higher than the range number. They also spotted a copy/paste error mixing up A1 and C1. Their work is what triggred the march 16. 2023 update of these formulas.
=BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),1,8))
&"."&
BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),9,8))
&"."&
BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),17,8))
&"."&
BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),25,8))
=BITAND(
(LEFT(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))-1)),
(BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),1,8)))
)
&"."&
BITAND(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))+1,FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))-1)),
(BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),9,8)))
)
&"."&
BITAND(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))+1,FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))-1)),
(BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),17,8)))
)
&"."&
BITAND(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))+1,FIND(CHAR(160),SUBSTITUTE(A1&".",".",CHAR(160),4))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))-1)),
(BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),25,8)))
)+1
=BITOR(
(LEFT(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))-1)),
(255-BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),1,8)))
)
&"."&
BITOR(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))+1,FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))-1)),
(255-BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),9,8)) )
)
&"."&
BITOR(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))+1,FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))-1)),
(255-BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),17,8)))
)
&"."&
BITOR(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))+1,FIND(CHAR(160),SUBSTITUTE(A1&".",".",CHAR(160),4))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))-1)),
(255-BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),25,8)))
)-1
=BITOR(
(LEFT(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))-1)),
(255-BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),1,8)))
)
&"."&
BITOR(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))+1,FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),1))-1)),
(255-BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),9,8)))
)
&"."&
BITOR(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))+1,FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),2))-1)),
(255-BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),17,8)))
)
&"."&
BITOR(
(MID(A1, FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))+1,FIND(CHAR(160),SUBSTITUTE(A1&".",".",CHAR(160),4))-FIND(CHAR(160),SUBSTITUTE(A1,".",CHAR(160),3))-1)),
(255-BIN2DEC(MID(REPT("1",B1)&REPT("0",32-B1),25,8)))
)
Updated the method of calculating the number of hosts, to peoperly calculate the number of hosts when CIDR is set to 31 (peer-to-peer network) and 32 which is a single IP.
=switch(B1, 31,2, 32,1, (2^(32-B1)-2))
For an IP setup such as 10.100.10.20/20 the following values will be calculated:
- Netmask: 255.255.240.0
- Start IP: 10.100.0.1
- End IP: 10.100.15.254
- Broadcast IP: 10.100.15.255
- Number of hosts: 4094
Thank you @f-steff and @jphir34
Picking up on the two (French) formulas that @jphir34 included above, I converted them to Excel lambda (and English) functions.
For converting IP addresses to an integer:
my test is
which yields 3232266596
to use this, in name manager
my name is 'ip2int' (but you can call it anything),
it refers to:
and you call it by =ip2int("192.168.121.100"), which yields 3232266596
For converting an integer to IP address:
my test is:
which yields "192.168.121.100"
to use this, in name manager
my name is 'int2ip' (but you can call it anything),
it refers to:
and you call it by =int2ip(3232266596), which yields "192.168.121.100"