8Bitdo SN30 Pro

8Bitdo SN30 Pro.cfg

# 8Bitdo SN30 Pro             - http://www.8bitdo.com/     - http://www.8bitdo.com/sn30pro-sf30pro/
# Firmware v1.37              - http://support.8bitdo.com/

input_driver = "dinput"
input_device = "Bluetooth Wireless Controller   "
input_device_display_name = "8Bitdo SN30 Pro"

# Hex vid:pid and Decimal vid:pid is shown in the "log_verbosity" window, enable "log_verbosity" in retroarch.cfg and run RetroArch.
# Hex vid:pid = 2DC8:6101 -> Decimal vid:pid = 11720:24833
# input_vendor_id = "11720"
# input_product_id = "24833"
input_a_btn = "0"
input_b_btn = "1"

input_x_btn = "3"
input_y_btn = "4"

input_l_btn = "6"
input_r_btn = "7"
input_l2_btn = "8"
input_r2_btn = "9"

input_select_btn = "10"
input_start_btn = "11"
input_l3_btn = "13"
input_r3_btn = "14"

input_l_x_plus_axis = "+0"
input_l_x_minus_axis = "-0"
input_l_y_plus_axis = "+1"
input_l_y_minus_axis = "-1"

input_r_x_plus_axis = "+2"
input_r_x_minus_axis = "-2"
input_r_y_plus_axis = "+3"
input_r_y_minus_axis = "-3"

input_menu_toggle_btn = "12"
input_enable_hotkey_btn = "10"

input_b_btn_label = "B"
input_y_btn_label = "Y"
input_select_btn_label = "Select"
input_start_btn_label = "Start"
input_a_btn_label = "A"
input_x_btn_label = "X"
input_l_btn_label = "L1"
input_r_btn_label = "R1"
input_l2_btn_label = "L2"
input_r2_btn_label = "R2"
input_l3_btn_label = "LS"
input_r3_btn_label = "RS"
input_l_x_plus_axis_label = "LS Right"
input_l_x_minus_axis_label = "LS Left"
input_l_y_plus_axis_label = "LS Down"
input_l_y_minus_axis_label = "LS Up"
input_r_x_plus_axis_label = "RS Right"
input_r_x_minus_axis_label = "RS Left"
input_r_y_plus_axis_label = "RS Down"
input_r_y_minus_axis_label = "RS Up"
input_menu_toggle_btn_label = "Home"

input_up_btn = "h0up"
input_down_btn = "h0down"
input_left_btn = "h0left"
input_right_btn = "h0right"

input_up_btn_label = "Dpad Up"
input_down_btn_label = "Dpad Down"
input_left_btn_label = "Dpad Left"
input_right_btn_label = "Dpad Right"