gistfile1

download 2012-10-28-wheezy-raspbian.zip
unzip 2012-10-28-wheezy-raspbian.zip into 2012-10-28-wheezy-raspbian.img
dd if=2012-10-28-wheezy-raspbian.img of=/dev/mmcblk0 bs=1M

Put the card into the raspberry pi, attach keyboard/mouse/ethernet/power & boot
It will boot inot raspi-config

in raspi-config
  - run expand_rootfs to use your entire SD card
  - run change_pass to change the password for the user pi
  - run ssh to enable ssh
  - run boot_behavior to have it boot into graphical mode.
  - run update

reboot. (it will take longer this time as it resize the filesystem)

ssh into the machine as pi or launch a terminal window
  switch to root: sudo su -
  run:  apt-get update && apt-get upgrade && reboot #(for good measure)

ssh into the machine as pi or launch a terminal window
################################################################################
# http://www.raspbian.org/RaspbianXBMC
################################################################################

# Install/upgrade build tools and dependencies.

sudo apt-get install -y build-essential autoconf ccache gawk gperf mesa-utils zip unzip
sudo apt-get install -y autotools-dev comerr-dev dpkg-dev libalsaplayer-dev \
    libapt-pkg-dev:armhf libasound2-dev:armhf libass-dev:armhf libatk1.0-dev \
    libavahi-client-dev libavahi-common-dev libavcodec-dev libavformat-dev \
    libavutil-dev libbison-dev:armhf libbluray-dev:armhf libboost1.49-dev \
    libbz2-dev:armhf libc-dev-bin libc6-dev:armhf libcaca-dev libcairo2-dev \
    libcdio-dev libclalsadrv-dev libcrypto++-dev libcups2-dev libcurl3-gnutls-dev \
    libdbus-1-dev libdbus-glib-1-dev libdirectfb-dev libdrm-dev libegl1-mesa-dev \
    libelf-dev libenca-dev libept-dev libevent-dev libexpat1-dev libflac-dev:armhf \
    libfontconfig1-dev libfreetype6-dev libfribidi-dev libgconf2-dev \
    libgcrypt11-dev libgdk-pixbuf2.0-dev libgl1-mesa-dev libgles2-mesa-dev \
    libglew-dev:armhf libglewmx-dev:armhf libglib2.0-dev libglu1-mesa-dev \
    libgnome-keyring-dev libgnutls-dev libgpg-error-dev libgtk2.0-dev libhal-dev \
    libhunspell-dev:armhf libice-dev:armhf libicu-dev libidn11-dev libiso9660-dev \
    libjasper-dev libjbig-dev:armhf libjconv-dev libjpeg8-dev:armhf libkrb5-dev \
    libldap2-dev:armhf libltdl-dev:armhf liblzo2-dev libmad0-dev libmicrohttpd-dev \
    libmodplug-dev libmp3lame-dev:armhf libmpeg2-4-dev libmysqlclient-dev \
    libncurses5-dev libnspr4-dev libnss3-dev libogg-dev:armhf libopenal-dev:armhf \
    libp11-kit-dev libpam0g-dev:armhf libpango1.0-dev libpcre++-dev libpcre3-dev \
    libpixman-1-dev libpng12-dev libprotobuf-dev libpthread-stubs0-dev:armhf \
    libpulse-dev:armhf librtmp-dev libsamplerate0-dev:armhf \
    libsdl-image1.2-dev:armhf libsdl1.2-dev libslang2-dev:armhf \
    libsm-dev:armhf libsmbclient-dev:armhf libspeex-dev:armhf \
    libsqlite3-dev libssh-dev libssh2-1-dev libssl-dev libstdc++6-4.6-dev \
    libtagcoll2-dev libtasn1-3-dev libtiff4-dev libtinfo-dev:armhf libtinyxml-dev \
    libts-dev:armhf libudev-dev libv8-dev libva-dev:armhf libvdpau-dev:armhf \
    libvorbis-dev:armhf libvpx-dev:armhf libwebp-dev:armhf libwibble-dev \
    libx11-dev:armhf libx11-xcb-dev libxapian-dev libxau-dev:armhf \
    libxcb-glx0-dev:armhf libxcb-render0-dev:armhf libxcb-shm0-dev:armhf \
    libxcb1-dev:armhf libxcomposite-dev libxcursor-dev:armhf libxdamage-dev \
    libxdmcp-dev:armhf libxext-dev:armhf libxfixes-dev libxft-dev libxi-dev \
    libxinerama-dev:armhf libxml2-dev:armhf libxmu-dev:armhf libxrandr-dev \
    libxrender-dev:armhf libxslt1-dev libxss-dev:armhf libxt-dev:armhf \
    libxtst-dev:armhf libxxf86vm-dev libyajl-dev libzip-dev linux-libc-dev:armhf \
    lzma-dev mesa-common-dev python-dev python2.7-dev x11proto-composite-dev \
    x11proto-core-dev x11proto-damage-dev x11proto-dri2-dev x11proto-fixes-dev \
    x11proto-gl-dev x11proto-input-dev x11proto-kb-dev x11proto-randr-dev \
    x11proto-record-dev x11proto-render-dev x11proto-scrnsaver-dev \
    x11proto-xext-dev x11proto-xf86vidmode-dev x11proto-xinerama-dev xtrans-dev \
    zlib1g-dev:armhf
    sudo apt-get clean
################################################################################

# Copy /opt/vc/include to /usr/include.

sudo cp -R /opt/vc/include/* /usr/include
sudo cp /opt/vc/include/interface/vcos/pthreads/* /usr/include/interface/vcos

# Create symbolic links for libEGL and libGLESv2 from /opt/vc/lib to /usr/lib and /usr/lib/arm-linux-gnueabihf

sudo ln -fs /opt/vc/lib/libEGL.so /usr/lib/libEGL.so
sudo ln -fs /opt/vc/lib/libEGL.so /usr/lib/arm-linux-gnueabihf/libEGL.so
sudo ln -fs /opt/vc/lib/libEGL.so /usr/lib/arm-linux-gnueabihf/libEGL.so.1
sudo ln -fs /opt/vc/lib/libEGL_static.a /usr/lib/libEGL_static.a
sudo ln -fs /opt/vc/lib/libEGL_static.a /usr/lib/arm-linux-gnueabihf/libEGL_static.a
sudo ln -fs /opt/vc/lib/libGLESv2.so /usr/lib/libGLESv2.so
sudo ln -fs /opt/vc/lib/libGLESv2.so /usr/lib/arm-linux-gnueabihf/libGLESv2.so
sudo ln -fs /opt/vc/lib/libGLESv2.so /usr/lib/arm-linux-gnueabihf/libGLESv2.so.2
sudo ln -fs /opt/vc/lib/libGLESv2_static.a /usr/lib/libGLESv2_static.a
sudo ln -fs /opt/vc/lib/libGLESv2_static.a /usr/lib/arm-linux-gnueabihf/libGLESv2_static.a
sudo ln -fs /opt/vc/lib/libbcm_host.so /usr/lib/libbcm_host.so
sudo ln -fs /opt/vc/lib/libbcm_host.so /usr/lib/arm-linux-gnueabihf/libbcm_host.so
sudo ln -fs /opt/vc/lib/libvchiq_arm.a /usr/lib/libvchiq_arm.a
sudo ln -fs /opt/vc/lib/libvchiq_arm.a /usr/lib/arm-linux-gnueabihf/libvchiq_arm.a
sudo ln -fs /opt/vc/lib/libvchiq_arm.so /usr/lib/libvchiq_arm.so
sudo ln -fs /opt/vc/lib/libvchiq_arm.so /usr/lib/arm-linux-gnueabihf/libvchiq_arm.so
sudo ln -fs /opt/vc/lib/libvcos.a /usr/lib/libvcos.a
sudo ln -fs /opt/vc/lib/libvcos.a /usr/lib/arm-linux-gnueabihf/libvcos.a
sudo ln -fs /opt/vc/lib/libvcos.so /usr/lib/libvcos.so
sudo ln -fs /opt/vc/lib/libvcos.so /usr/lib/arm-linux-gnueabihf/libvcos.so

# Get the latest XBMC from git.

[ ! -d /var/cache/git ] && mkdir -p /var/cache/git
cd /var/cache/git; git clone --depth 1 git://github.com/xbmc/xbmc-rbp.git

# Prepare the XBMC code for compilation.

cd /var/cache/git/xbmc-rbp/
sed -i 's/USE_BUILDROOT=1/USE_BUILDROOT=0/' tools/rbp/setup-sdk.sh
sed -i 's/TOOLCHAIN=\/usr\/local\/bcm-gcc/TOOLCHAIN=\/usr/' tools/rbp/setup-sdk.sh
sudo sh tools/rbp/setup-sdk.sh
sed -i 's/cd $(SOURCE); $(CONFIGURE)/#cd $(SOURCE); $(CONFIGURE)/' tools/rbp/depends/xbmc/Makefile

# Build the XMBC build tools.
make -C tools/rbp/depends/xbmc/

# Configure XBMC.
./configure --prefix=/usr --build=arm-linux-gnueabihf \
            --host=arm-linux-gnueabihf --localstatedir=/var/lib \
            --with-platform=raspberry-pi --disable-gl --enable-gles \
            --disable-x11 --disable-sdl --enable-ccache --enable-optimizations \
            --enable-external-libraries --disable-goom --disable-hal \
            --disable-pulse --disable-vaapi --disable-vdpau --disable-xrandr \
            --disable-airplay --disable-alsa --enable-avahi \
            --disable-libbluray --disable-dvdcss --disable-debug \
            --disable-joystick --enable-mid --disable-nfs --disable-profiling \
            --disable-projectm --enable-rsxs --enable-rtmp --disable-vaapi \
            --disable-vdadecoder --disable-external-ffmpeg  \
            --disable-optical-drive

# Fix up some of the make files.

sed -i 's/-msse2//' lib/libsquish/Makefile
sed -i 's/-DSQUISH_USE_SSE=2//' lib/libsquish/Makefile

# Make XBMC.
    make

# Install XBMC as root.
    sudo make install

# /boot/config.txt (or use raspi-config)
...
gpu_mem=256

# reboot

# run xbmc as root
# sudo /usr/lib/xbmc/xbmc.bin
################################################################################
#                                                                              #
################################################################################
# unzip repository.bluecop.xbmc-plugins into ~/.xbmc/addons
run xbmc as root, 
    System -> Settings -> Addons, select the bluecop repo,
        Install and Configure Amazon, Hulu, etc.
    Videos -> Addons -> Amazon -> Follow the menus, they're a little slow...

video seems smooth so far...



################################################################################
# misc other things:                                                           #
################################################################################

# apt-get install -y x11-xserver-utils
# synergy ?

#
# To allow x2x (xbmc seems to ignore it, though)
# 
/etc/X11/xinit/xserverrc
#exec /usr/bin/X -nolisten tcp "$@"
exec /usr/bin/X "$@"

# /etc/lightdm/lightdm.conf => 
[SeatDefaults]
...
xserver-allow-tcp=true
...