Hacking Nespresso Expert Machine to brew coffee using custom applications via bluetooth

nespresso_expert_hack.md

Nespresso Expert machine Hack (Bluetooth)

Nespresso Expert machine has the Bluetooth ability which officially can be used only by Nespresso mobile app and it does not offer any API for 3rd party applications and services. Moreover, the Bluetooth services and characteristics are not documented and easy to use by the other Bluetooth libraries plus there is no documentation for the Bluetooth packets payload that need to be sent or received.

However, after searching a lot and sniffing the packets for a couple of days, I've been able to hack the machine and write the small nodejs application using noble and express to control and monitor the machine with Rest API exposed by express through Bluetooth connection. As I did this application for my ex-company and they are still using it for their demo I cannot share the code but I'm going to explain how it works.

Thanks to this repo: https://github.com/fsalomon/nespresso-expert-ble and also this nice medium post https://medium.com/@urish/reverse-engineering-a-bluetooth-lightbulb-56580fcb7546 that basically helped me to understand how I need to sniff the packets.

Sniffing

first I have installed the Nespresso app on my mobile and I connected to the machine and used the application. Then, using the post I mentioned above, I sniffed the packets and opened them in the Wireshark to analyze them.

Authentication

I notice that everytime on the app we start communicating with the machine (brew or monitor or just oppening machine tab) it starts the conversation with a packet that has "8" at the start of its value and has 16 characters (mine was 85c55bc324a4170b) and it is writting on the 4th characteristic of the service 06aa1910f22a11e39daa0002a5d5c51b. note: only one mobile can connect to the expert machine and everytime that new mobile connects (which needs the device reset) the authentication packet will change.

I have used noble library for ble communication. I mention some hints ;) Authentication will be done by writing to 4th characteristic of the first service Buffer.from("85c55bc324a4170b", "hex"). after writing when you read the 5th characteristic, the data should be "2" which means authenticaton was successful.

Communication

I don't know why, and dont ask me please but before sending the brew command you need to write this Buffer.from("01100800000200c8000000", "hex") on the 4th charac of the second service ("06aa1920f22a11e39daa0002a5d5c51b") and then inside the callback, you write this Buffer.from("03050704000000000101", "hex") which is low temp espresso. Now you machine should start brewing... yayyyy

below I leave all of my notes in case it can be useful

Brewing Types

Here are my observations:

• 0305070400000000 00 00 medium ristretto
• 0305070400000000 01 01 low espresso
• 0305070400000000 02 02 high lungo
• 0305070400000000 01 04 low hot water
• 0305070400000000 01 05 low americano
• 0305070400000000 01 07 low probably cleaning mode (all lights turning on together)
• 03060102 would stop the brewing (not always)

Machine Alarms (Errors)

On the second service, on 0th charac read normally is like 0:64 1:9 2:13 3:64 4:128 5:0 6:255 7:255.

• 0: 64 is ok, 65: no water
• 1: 64 with 132 is brewing or busy , 64 with 2 ready , 64 with 66/67/7x :full disposal or no disposal on second service, on 4th charac read normally is like: 0:129 1:16 2:1 3:32 4:0 5:0 6:0 7:0 8:0 9:0 10:0 11:0 12:0 13:0 14:0 15:0 16:0 17:0 18:0 19:0

For understanding slide error, read should be done after command of brew

• 1: 195 slider error, 129 ok, 131 busy brewing

Hello Thanks for your work

I’m in the same situation than @bulldog5046 To be more precise, Nespresso forced to update the app and I can not use the old one anymore :(

just to know if I understand well :

• if I reset my Nespresso machine the old machine, the pairing will be canceled
• can I paire my diy system through ble by using a random or a defined (like 8D1E357A7C12F176) pairing key ?
• if it has to be defined, I didn’t get how to generate it.

Thanks in advance for your help Have a good day

See my Git repo for detailed process:

https://github.com/bulldog5046/ha_nespresso_integration/blob/main/nespresso.py#L217

But in short:

• Yes
• Either/or
• It's just a hex key derived from a random source. There's nothing special about it other than the length

@bulldog5046
Thanks for your fast reply 😁

I factory reset the machine
I sent the 01 value
I sent the random key (good length)
I got the 02 value

so if I get it well, the authentification is ok, isn’t it ?
if yes, I will work on the next steps later :D

thanks again

Ist there a way to hack the Firmware to use make every time big cup on button press without a cup inserted. Dolce Gusto pods seems to work fine, bit the Barcode Ring is needed. https://youtu.be/509bpMVuOO4?si=0NtsxGFbFIctIIyn