-
-
Save fernandoaleman/2172388 to your computer and use it in GitHub Desktop.
| ## Configure eth0 | |
| # | |
| # vi /etc/sysconfig/network-scripts/ifcfg-eth0 | |
| DEVICE="eth0" | |
| NM_CONTROLLED="yes" | |
| ONBOOT=yes | |
| HWADDR=A4:BA:DB:37:F1:04 | |
| TYPE=Ethernet | |
| BOOTPROTO=static | |
| NAME="System eth0" | |
| UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 | |
| IPADDR=192.168.1.44 | |
| NETMASK=255.255.255.0 | |
| ## Configure Default Gateway | |
| # | |
| # vi /etc/sysconfig/network | |
| NETWORKING=yes | |
| HOSTNAME=centos6 | |
| GATEWAY=192.168.1.1 | |
| ## Restart Network Interface | |
| # | |
| /etc/init.d/network restart | |
| ## Configure DNS Server | |
| # | |
| # vi /etc/resolv.conf | |
| nameserver 8.8.8.8 # Replace with your nameserver ip | |
| nameserver 192.168.1.1 # Replace with your nameserver ip |
@Arinerron: set up your default gateway, no gateway, your systems only knows your local network (192.168.1.x/y). Furthermore you should use ip add sh, instead of ifconfig nowadays.
OMG THANK YOU! Spent half a day trying to figure out how to create a static IP on CentOS.. this took me 5 mins to do.
Make sure to refer to /usr/share/doc/initscripts-*/sysconfig.txt (search for /etc/sysconfig/network-scripts/ifcfg) - that's the only built-in documentation for this mechanism.
Okay so dumb question that I probably don't need to worry about, is there a difference when you do ONBOOT=yes versus ONBOOT="yes" with quotes? I get using quotes if there's a space in it like your example of NAME="System eth0" but does it matter for one word entries like yes or no?
I have done all the things as guided but still internet is not working, on using ping command it says unknown hosts: . I did exactly same as asked.please do help me.i tried almost everything.
Thank you so much :)
its nice thank u
thank you :-)
For IP ranges you can also use my scirpt: https://github.com/jonsbun/add-ips-centos