Created
March 19, 2024 05:11
-
-
Save feryw/1624a06fc8e511cbef536ab49faf4f7e to your computer and use it in GitHub Desktop.
lg7100 dts
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /dts-v1/; | |
| / { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x01>; | |
| compatible = "lg,gapm-7100\0realtek,rtl8198c-soc"; | |
| model = "LG GAPM-7100"; | |
| chosen { | |
| bootargs = "console=ttyS0,115200"; | |
| }; | |
| clk40 { | |
| #clock-cells = <0x00>; | |
| clock-frequency = <0x2625a00>; | |
| compatible = "fixed-clock"; | |
| }; | |
| cmp@1fbf8000 { | |
| compatible = "mti,mips-cmp"; | |
| reg = <0x1fbf8000 0x8000>; | |
| }; | |
| cpc@1bde0000 { | |
| compatible = "mti,mips-cpc"; | |
| reg = <0x1bde0000 0x8000>; | |
| }; | |
| cpuclock@0 { | |
| #clock-cells = <0x00>; | |
| clock-frequency = <0x3b9aca00>; | |
| compatible = "fixed-clock"; | |
| }; | |
| cpuintc { | |
| #address-cells = <0x00>; | |
| #interrupt-cells = <0x01>; | |
| compatible = "mti,cpu-interrupt-controller"; | |
| interrupt-controller; | |
| phandle = <0x01>; | |
| }; | |
| cpus { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| cpu@0 { | |
| compatible = "mips,mips1074Kc"; | |
| device_type = "cpu"; | |
| reg = <0x00>; | |
| }; | |
| cpu@1 { | |
| compatible = "mips,mips1074Kc"; | |
| device_type = "cpu"; | |
| reg = <0x01>; | |
| }; | |
| }; | |
| dwc@18030000 { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| compatible = "realtek,rtk-dwc2"; | |
| dr_mode = "host"; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x21 0x04>; | |
| reg = <0x18030000 0x10000>; | |
| status = "okay"; | |
| }; | |
| eth@18010000 { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| compatible = "realtek,rtl819x-eth"; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x19 0x04>; | |
| mtd-mac-address = <0x05 0x07>; | |
| realtek,switch = <0x04>; | |
| reg = <0x18010000 0x100>; | |
| status = "okay"; | |
| }; | |
| gpio-keys-polled { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| compatible = "gpio-keys-polled"; | |
| poll-interval = <0x14>; | |
| restart { | |
| gpios = <0x03 0x1e 0x01>; | |
| label = "Reset"; | |
| linux,code = <0x198>; | |
| }; | |
| wps { | |
| gpios = <0x03 0x2b 0x01>; | |
| label = "WPS"; | |
| linux,code = <0x211>; | |
| }; | |
| }; | |
| gpio@19000000 { | |
| #gpio-cells = <0x02>; | |
| chip = <0x00>; | |
| compatible = "gpio-wlan"; | |
| gpio-controller; | |
| ngpios = <0x10>; | |
| reg = <0x19000000 0x100>; | |
| wlan = <0x01>; | |
| }; | |
| gpio@1a000000 { | |
| #gpio-cells = <0x02>; | |
| chip = <0x01>; | |
| compatible = "gpio-wlan"; | |
| gpio-controller; | |
| ngpios = <0x10>; | |
| reg = <0x1a000000 0x100>; | |
| wlan = <0x00>; | |
| }; | |
| gsw@1b800000 { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| compatible = "realtek,rtl819x-gsw"; | |
| phandle = <0x04>; | |
| reg = <0x1b800000 0x10000 0x1b000000 0x140000>; | |
| ports { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| reg = <0x00>; | |
| port@0 { | |
| label = "wan"; | |
| reg = <0x00>; | |
| status = "disabled"; | |
| }; | |
| port@1 { | |
| label = "lan1"; | |
| reg = <0x01>; | |
| status = "disabled"; | |
| }; | |
| port@2 { | |
| label = "lan2"; | |
| reg = <0x02>; | |
| status = "disabled"; | |
| }; | |
| port@3 { | |
| label = "lan3"; | |
| reg = <0x03>; | |
| status = "disabled"; | |
| }; | |
| port@4 { | |
| label = "lan4"; | |
| reg = <0x04>; | |
| status = "disabled"; | |
| }; | |
| port@5 { | |
| label = "cpu"; | |
| reg = <0x05>; | |
| status = "disabled"; | |
| }; | |
| }; | |
| }; | |
| interrupt-controller@1bdc0000 { | |
| #address-cells = <0x00>; | |
| #interrupt-cells = <0x03>; | |
| compatible = "mti,gic"; | |
| interrupt-controller; | |
| interrupt-parent = <0x01>; | |
| phandle = <0x02>; | |
| reg = <0x1bdc0000 0x2000>; | |
| }; | |
| leds { | |
| compatible = "gpio-leds"; | |
| lan1a { | |
| gpios = <0x03 0x25 0x00>; | |
| label = "rtl819x:amber:lan1"; | |
| }; | |
| lan1g { | |
| gpios = <0x03 0x21 0x00>; | |
| label = "rtl819x:green:lan1"; | |
| linux,default-trigger = "default-on"; | |
| }; | |
| lan2a { | |
| gpios = <0x03 0x2a 0x00>; | |
| label = "rtl819x:amber:lan2"; | |
| }; | |
| lan2g { | |
| gpios = <0x03 0x29 0x00>; | |
| label = "rtl819x:green:lan2"; | |
| linux,default-trigger = "default-on"; | |
| }; | |
| lan3a { | |
| gpios = <0x03 0x28 0x00>; | |
| label = "rtl819x:amber:lan3"; | |
| }; | |
| lan3g { | |
| gpios = <0x03 0x27 0x00>; | |
| label = "rtl819x:green:lan3"; | |
| linux,default-trigger = "default-on"; | |
| }; | |
| lan4a { | |
| gpios = <0x03 0x2e 0x00>; | |
| label = "rtl819x:amber:lan4"; | |
| }; | |
| lan4g { | |
| gpios = <0x03 0x2d 0x00>; | |
| label = "rtl819x:green:lan4"; | |
| linux,default-trigger = "default-on"; | |
| }; | |
| status { | |
| gpios = <0x03 0x26 0x01>; | |
| label = "rtl819x:red:status"; | |
| linux,default-trigger = "default-on"; | |
| }; | |
| wana { | |
| gpios = <0x03 0x23 0x00>; | |
| label = "rtl819x:amber:wan"; | |
| }; | |
| wang { | |
| gpios = <0x03 0x24 0x00>; | |
| label = "rtl819x:green:wan"; | |
| linux,default-trigger = "default-on"; | |
| }; | |
| wifi2g { | |
| gpios = <0x03 0x3f 0x01>; | |
| label = "rtl819x:green:wifi2g"; | |
| linux,default-trigger = "netdev"; | |
| netdev { | |
| device-name = "wlan1"; | |
| link; | |
| rx; | |
| tx; | |
| }; | |
| }; | |
| wifi5g { | |
| gpios = <0x03 0x10 0x01>; | |
| label = "rtl819x:green:wifi5g"; | |
| linux,default-trigger = "netdev"; | |
| netdev { | |
| device-name = "wlan0"; | |
| link; | |
| rx; | |
| tx; | |
| }; | |
| }; | |
| wps { | |
| gpios = <0x03 0x2c 0x01>; | |
| label = "rtl819x:green:wps"; | |
| }; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| reg = <0x00 0x8000000>; | |
| }; | |
| pcie@18b00000 { | |
| #address-cells = <0x03>; | |
| #size-cells = <0x02>; | |
| bus-range = <0x00 0xff>; | |
| clocks = <0x06>; | |
| compatible = "realtek,rtl819x-pci"; | |
| device_type = "pci"; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x1f 0x04>; | |
| ranges = <0x2000000 0x00 0x00 0x19000000 0x00 0x1000000 0x1000000 0x00 0x00 0x18c00000 0x00 0x200000>; | |
| reg = <0x18b00000 0x1000 0x18b01000 0x1000 0x18b10000 0x1000 0x18b11000 0x1000>; | |
| reg-names = "rc_cfg\0rc_ext\0dev_cfg0\0dev_cfg1"; | |
| slot-num = <0x00>; | |
| }; | |
| pcie@18b20000 { | |
| #address-cells = <0x03>; | |
| #size-cells = <0x02>; | |
| bus-range = <0x00 0xff>; | |
| clocks = <0x06>; | |
| compatible = "realtek,rtl819x-pci"; | |
| device_type = "pci"; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x20 0x04>; | |
| ranges = <0x2000000 0x00 0x00 0x1a000000 0x00 0x1000000 0x1000000 0x00 0x00 0x18e00000 0x00 0x200000>; | |
| reg = <0x18b20000 0x1000 0x18b21000 0x1000 0x18b30000 0x1000 0x18b31000 0x1000>; | |
| reg-names = "rc_cfg\0rc_ext\0dev_cfg0\0dev_cfg1"; | |
| slot-num = <0x01>; | |
| }; | |
| refclk { | |
| #clock-cells = <0x00>; | |
| clock-frequency = <0x17d7840>; | |
| compatible = "fixed-clock"; | |
| phandle = <0x06>; | |
| }; | |
| rstctrl { | |
| #reset-cells = <0x01>; | |
| compatible = "realtek,rtl819x-reset"; | |
| }; | |
| soc { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x01>; | |
| compatible = "simple-bus"; | |
| ranges = <0x00 0x18000000 0x10000>; | |
| gpio@3500 { | |
| #gpio-cells = <0x02>; | |
| #interrupt-cells = <0x02>; | |
| compatible = "realtek,rtl819x-gpio"; | |
| gpio-controller; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x1a 0x04 0x00 0x1b 0x04>; | |
| phandle = <0x03>; | |
| reg = <0x3500 0x100>; | |
| }; | |
| memory-controller@1000 { | |
| compatible = "realtek,rtl819x-memc"; | |
| reg = <0x1000 0x100>; | |
| }; | |
| serial@2000 { | |
| clock-frequency = <0xbebc200>; | |
| compatible = "realtek,rtl819x-uart\0ns16550a"; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x12 0x04>; | |
| reg = <0x2000 0x100>; | |
| reg-shift = <0x02>; | |
| }; | |
| spi@1200 { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| compatible = "realtek,rtl819x-nor"; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x29 0x04>; | |
| num-cs = <0x02>; | |
| reg = <0x1200 0x100>; | |
| status = "okay"; | |
| flash@0 { | |
| compatible = "jedec,spi-nor"; | |
| reg = <0x00>; | |
| spi-max-frequency = <0x2faf080>; | |
| partitions { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x01>; | |
| compatible = "fixed-partitions"; | |
| partition@0 { | |
| label = "boot"; | |
| reg = <0x00 0x40000>; | |
| }; | |
| partition@20000 { | |
| label = "hwpart"; | |
| phandle = <0x05>; | |
| reg = <0x20000 0x20000>; | |
| }; | |
| partition@40000 { | |
| label = "nvram"; | |
| reg = <0x40000 0x20000>; | |
| }; | |
| partition@800000 { | |
| label = "firmware"; | |
| reg = <0x800000 0x1800000>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| system-controller@0 { | |
| compatible = "realtek,rtl819x-sysc"; | |
| reg = <0x00 0x1000>; | |
| }; | |
| watchdog@3100 { | |
| compatible = "realtek,rtl819x-wdt"; | |
| reg = <0x3100 0x20>; | |
| }; | |
| }; | |
| sysclock@1 { | |
| #clock-cells = <0x00>; | |
| clock-frequency = <0x2faf080>; | |
| compatible = "fixed-clock"; | |
| }; | |
| wmac { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x01>; | |
| compatible = "realtek,rtl819x-wmac"; | |
| ranges = <0x00 0x00 0x20000000>; | |
| wmac0 { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| compatible = "realtek,rtl819x-wmac"; | |
| ext-lna; | |
| ext-pa; | |
| init-mode = <0x01>; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x20 0x04>; | |
| mtd-mac-address = <0x05 0x13>; | |
| reg = <0x18b30000 0x1000 0x1a000000 0x1000>; | |
| rfe-type = <0x04>; | |
| status = "okay"; | |
| trswitch; | |
| }; | |
| wmac1 { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| ext-pa; | |
| init-mode = <0x01>; | |
| int-lna; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x1f 0x04>; | |
| mtd-mac-address = <0x05 0x9d3>; | |
| reg = <0x18b10000 0x1000 0x19000000 0x1000>; | |
| status = "okay"; | |
| trswitch; | |
| }; | |
| }; | |
| xhci@18040000 { | |
| #address-cells = <0x01>; | |
| #size-cells = <0x00>; | |
| compatible = "realtek,rtl819x-xhci"; | |
| interrupt-parent = <0x02>; | |
| interrupts = <0x00 0x22 0x04>; | |
| reg = <0x18040000 0x10000>; | |
| status = "okay"; | |
| vcc-gpio = <0x03 0x38 0x01>; | |
| }; | |
| }; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment