Hengjie

How to passthrough SATA drives directly on VMWare EXSI 6.5 as RDMs

There aren't many tutorials about this, the only tutorials I've found were about passing through entire PCIe cards to VMs, or refered to old ESXI versions (below 6.5) that used a more comprehensive desktop client instead of the web app. In v6.5, the web app was introduced and the desktop client was deprecated. You used to be able to setup RDMs in the desktop client, but with the introduction of the web console, this is no longer the case. This tutorial shows you how to pass SATA HDDs to the virtual machine on VMWare ESXI 6.5. This tutorial is partially based on VMWare's own KB and the now deprecated Forza IT blog post.

A word about VMWare ESXI 6.7

There is now an option while editing your VM's settings to add a New raw disk when you click `Add ha

soffchen

[General]
skip-proxy = 127.0.0.1, 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12, 100.64.0.0/10, localhost, *.local, ::ffff:0:0:0:0/1, ::ffff:128:0:0:0/1
bypass-tun = 192.168.0.0/16, 10.0.0.0/8, 172.16.0.0/12
# dns-server = 119.29.29.29, 223.5.5.5, 114.114.114.114
loglevel = notify

[Proxy]
BJ-All = custom
BJ-HK-Azure = custom
BJ-US-Azure = custom

janlay

Install

1. Modify index.txt with your output path and proxy info
2. Use Text Builder to build configuration for Surge: $ text-builder -index /path/to/index.txt Or run $ sh build-all to build all your index files.
3. Import configuration via AirDrop/iTunes/Dropbox/iCloud

本人不提供任何保证和技术支持，使用者自负风险。
There are no guarantees, no any support. Use it at your own risk.

NickCraver

##################
# Privacy Settings
##################

# Privacy: Let apps use my advertising ID: Disable
Set-ItemProperty -Path HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\AdvertisingInfo -Name Enabled -Type DWord -Value 0
# To Restore:
#Set-ItemProperty -Path HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\AdvertisingInfo -Name Enabled -Type DWord -Value 1
# Privacy: SmartScreen Filter for Store Apps: Disable
Set-ItemProperty -Path HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\AppHost -Name EnableWebContentEvaluation -Type DWord -Value 0

klzgrad

朴素VPN：一个纯内核级静态隧道

由于路由管控系统的建立，实时动态黑洞路由已成为最有效的封锁手段，TCP连接重置和DNS污染成为次要手段，利用漏洞的穿墙方法已不再具有普遍意义。对此应对方法是多样化协议的VPN来抵抗识别。这里介绍一种太简单、有时很朴素的“穷人VPN”。

朴素VPN只需要一次内核配置（Linux内核），即可永久稳定运行，不需要任何用户态守护进程。所有流量转换和加密全部由内核完成，原生性能，开销几乎没有。静态配置，避免动态握手和参数协商产生指纹特征导致被识别。并且支持NAT，移动的内网用户可以使用此方法。支持广泛，基于L2TPv3标准，Linux内核3.2+都有支持，其他操作系统原则上也能支持。但有两个局限：需要root权限；一个隧道只支持一个用户。

朴素VPN利用UDP封装的静态L2TP隧道实现VPN，内核XFRM实现静态IPsec。实际上IP-in-IP隧道即可实现VPN，但是这种协议无法穿越NAT，因此必须利用UDP封装。内核3.18将支持Foo-over-UDP，在UDP里面直接封装IP，与静态的L2TP-over-UDP很类似。

创建一个朴素VPN

ahmozkya

Do not use this guide. The dnscrypt protocol and dnscrypt-proxy configuration file have changed a lot since I wrote this gist. Check the following links for help:

• https://dnscrypt.info/faq
• https://github.com/DNSCrypt/dnscrypt-proxy

Install & Configure

1. Install DNSMasq

$ brew install dnsmasq

ragingwind

Backend Architectures

Twitter

ror, scala, jetty, erlang, thrift, mongrel, comet server, my-sql, memchached, varnish, kestrel(mq), starling, gizzard, cassandra, hadoop, vertica, munin, nagios, awstats

• Introduce Gizzard of Twitter - 트위터의 새로운 분산 관리 라이브러리 Gizzard를 소개합니다.
• The Architecture Twitter Uses to Deal with 150M Active Users, 300K QPS, a 22 MB/S Firehose, and Send Tweets in Under 5 Seconds
• Scaling Twitter: Making Twitter 10000 Percent Faster

djacobs

#!/bin/sh

# Current as working as of 2012/4/17
# Xcode 4.3.2

PROJECT_ROOT="$HOME/SomeDirWhereYourProjectLives/XXXXXXXX"

WORKSPACE="$PROJECT_ROOT/XXXXXXXX.xcodeproj/project.xcworkspace"
CONFIG="AdHoc"
SCHEME="XXXXXXXX"

michiel

#
# Wide-open CORS config for nginx
#
location / {

     if ($request_method = 'OPTIONS') {

        add_header 'Access-Control-Allow-Origin' '*';
        
        #