fevangelou · October 28, 2024 22:46 · EvangelosBalafoutis · May 19, 2020 · EvangelosBalafoutis · May 21, 2020
diff --git a/my.cnf b/my.cnf
 # === Optimized my.cnf configuration for MySQL/MariaDB (on cPanel/WHM servers) ===
 #
 # by Fotis Evangelou, developer of Engintron (engintron.com)
 #
 # ~ Updated September 2024 ~
 #
 #
 # The settings provided below are a starting point for a 8-16 GB RAM server with 4-8 CPU cores.
 # If you have different resources available you should adjust accordingly to save CPU, RAM & disk I/O usage.
 #
 # The settings marked with a specific comment or the word "UPD" (after the value)
 # should be adjusted for your system by using database diagnostics tools like:
 #
 # https://github.com/major/MySQLTuner-perl
 # or
 # https://github.com/BMDan/tuning-primer.sh
 #
 # Run either of these scripts before optimizing your database, at least 1 hr after the optimization & finally
 # at least once a day for 3 days (without restarting the database) to see how your server performs and if you need
 # to re-adjust anything. The more MySQL/MariaDB runs without restarting, the more usage data it gathers, so these
 # diagnostics scripts will report in mode detail how MySQL/MariaDB performs.
 #
 #
 # IMPORTANT NOTE: If there is NO comment after a setting value, then 99,9% of the times you won't need to adjust it.
 #
 #
 # --- THINGS TO DO AFTER YOU UPDATE MY.CNF - TROUBLESHOOTING ---
 #
 # If any terminal commands are mentioned, make sure you execute them as "root" user.
 #
 # If MySQL or MariaDB cannot start (or restart), then perform the following actions.
 #
 # 1. If the server had the stock database configuration and you added or updated any
 #    "innodb_log_*" settings (as suggested below), then execute these commands ONLY
 #    the first time you apply this configuration:
 #
 #    $ touch /var/lib/mysql/mysql.sock
 #    $ touch /var/lib/mysql/mysql.pid
 #    $ chown -R mysql:mysql /var/lib/mysql
 #    $ /scripts/restartsrv_mysql
 #
 #    or use the shorthand command:
 #    $ touch /var/lib/mysql/mysql.sock; touch /var/lib/mysql/mysql.pid; chown -R mysql:mysql /var/lib/mysql; /scripts/restartsrv_mysql
 #
 #    IMPORTANT: If you edit this file from the Engintron WHM app in cPanel/WHM,
 #    then you DO NOT need to execute the above terminal commands. When you save
 #    the file through the Engintron WHM app, these terminal commands will be
 #    executed automatically after the file is saved on disk.
 #
 # 2. If the setting "bind-address" is not commented out, then make sure the file /etc/hosts is
 #    properly configured. A good example of a "clean" /etc/hosts file is something like this:
 #
 #    127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
 #    ::1       localhost localhost.localdomain localhost6 localhost6.localdomain6
 #    1.2.3.4   hostname.domain.tld hostname # <-- Replace accordingly!
 #
 #    Finally restart the database using the related cPanel script:
 #
 #    $ /scripts/restartsrv_mysql
 #
 # 3. If the database service cannot restart even after the first 2 steps, make sure the database data folder
 #    (common for either MySQL or MariaDB) "/var/lib/mysql" is owned by the "mysql" user AND group.
 #    Additionally, the folder itself can have 0751 or 0755 file permissions. To fix it, simply do this:
 #    $ chown -R mysql:mysql /var/lib/mysql
 #    $ chmod 0755 /var/lib/mysql
 #
 #    Finally restart the database using the related cPanel script:
 #
 #    $ /scripts/restartsrv_mysql
 #
 # 4. Adjust SQL settings under "Tweak Settings" in WHM:
 #    After applying the optimized my.cnf file, you'll also want to DISABLE the following 3 settings
 #    in the "SQL" tab of Tweak Settings in WHM:
 #
 #    - Allow cPanel & WHM to determine the best value for your MySQL open_files_limit configuration?
 #    - Allow cPanel & WHM to determine the best value for your MySQL max_allowed_packet configuration?
 #    - Allow cPanel & WHM to determine the best value for your MySQL innodb_buffer_pool_size configuration?
 #
 #
 # ~ FIN ~

 [mysql]
 port                            = 3306
 socket                          = /var/lib/mysql/mysql.sock

 [mysqld]
 # === Required Settings ===
 basedir                         = /usr
 bind_address                    = 127.0.0.1 # Change to 0.0.0.0 to allow remote connections
 datadir                         = /var/lib/mysql
 #default_authentication_plugin  = mysql_native_password # Enable in MySQL 8+ or MariaDB 10.6+ for backwards compatibility with common CMSs
 max_allowed_packet              = 256M
 max_connect_errors              = 1000000
 pid_file                        = /var/lib/mysql/mysql.pid
 port                            = 3306
 skip_external_locking
 socket                          = /var/lib/mysql/mysql.sock
 tmpdir                          = /tmp
 user                            = mysql

 # === SQL Compatibility Mode ===
 # Enable for b/c with databases created in older MySQL/MariaDB versions
 # (e.g. when using null dates)
 #sql_mode                       = ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION,ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES
 # For maximum compatibility, just use:
 #sql_mode                       = ""

 # === InnoDB Settings ===
 default_storage_engine          = InnoDB
 innodb_buffer_pool_instances    = 4     # Use 1 instance per 1GB of InnoDB pool size - max is 64
 innodb_buffer_pool_size         = 4G    # Use up to 70-80% of RAM
 innodb_file_per_table           = 1
 innodb_flush_log_at_trx_commit  = 0
 innodb_flush_method             = O_DIRECT
 innodb_log_buffer_size          = 16M
 innodb_log_file_size            = 1G
 innodb_sort_buffer_size         = 4M    # UPD - Defines how much data is read into memory for sorting operations before writing to disk (default is 1M / max is 64M)
 innodb_stats_on_metadata        = 0
 #innodb_use_fdatasync           = 1     # Only (!) for MySQL v8.0.26+

 #innodb_temp_data_file_path     = ibtmp1:64M:autoextend:max:20G # Control the maximum size for the ibtmp1 file
 #innodb_thread_concurrency      = 4     # Optional: Set to the number of CPUs on your system (minus 1 or 2) to better
                                        # contain CPU usage. E.g. if your system has 8 CPUs, try 6 or 7 and check
                                        # the overall load produced by MySQL/MariaDB.
 innodb_read_io_threads          = 64
 innodb_write_io_threads         = 64
 #innodb_io_capacity             = 2000  # Depends on the storage tech - use 2000 for SSD, more for NVMe
 #innodb_io_capacity_max         = 4000  # Usually double the value of innodb_io_capacity

 # === MyISAM Settings ===
 # The following 3 options are ONLY supported by MariaDB & up to MySQL 5.7
 # Do NOT un-comment on MySQL 8.x+
 #query_cache_limit              = 4M    # UPD
 #query_cache_size               = 64M   # UPD
 #query_cache_type               = 1     # Enabled by default

 key_buffer_size                 = 16M   # UPD

 low_priority_updates            = 1
 concurrent_insert               = 2

 # === Connection Settings ===
 max_connections                 = 90    # UPD - Important: high no. of connections = high RAM consumption

 back_log                        = 512
 thread_cache_size               = 100
 thread_stack                    = 192K

 interactive_timeout             = 180
 wait_timeout                    = 180

 # For MySQL 5.7+ only (disabled by default)
 #max_execution_time             = 90000 # Set a timeout limit for SELECT statements (value in milliseconds).
                                        # This option may be useful to address aggressive crawling on large sites,
                                        # but it can also cause issues (e.g. with backups). So use with extreme caution and test!
                                        # More info at: https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_max_execution_time

 # For MariaDB 10.1.1+ only (disabled by default)
 #max_statement_time             = 90    # The equivalent of "max_execution_time" in MySQL 5.7+ (set above)
                                        # The variable is of type double, thus you can use subsecond timeout.
                                        # For example you can use value 0.01 for 10 milliseconds timeout.
                                        # More info at: https://mariadb.com/kb/en/aborting-statements/

 # === Buffer Settings ===
 # Handy tip for managing your database's RAM usage:
 # The following values should be treated carefully as they are added together and then multiplied by your "max_connections" value.
 # Other options will also add up to RAM consumption (e.g. tmp_table_size). So don't go switching your "join_buffer_size" to 1G, it's harmful & inefficient.
 # Use one of the database diagnostics tools mentioned at the top of this file to count your database's potential total RAM usage, so you know if you are within
 # reasonable limits. Remember that other services will require enough RAM to operate properly (like Apache or PHP-FPM), so set your limits wisely.
 join_buffer_size                = 4M    # UPD
 read_buffer_size                = 3M    # UPD
 read_rnd_buffer_size            = 4M    # UPD
 sort_buffer_size                = 4M    # UPD

 # === Table Settings ===
 # In systemd managed systems like Ubuntu 16.04+ or CentOS 7+, you need to perform an extra action for table_open_cache & open_files_limit
 # to be overriden (also see comment next to open_files_limit).
 # E.g. for MySQL 5.7, please check: https://dev.mysql.com/doc/refman/5.7/en/using-systemd.html
 # and for MariaDB check: https://mariadb.com/kb/en/library/systemd/
 table_definition_cache          = 50000 # UPD
 table_open_cache                = 50000 # UPD
 open_files_limit                = 60000 # UPD - This can be 2x to 3x the table_open_cache value or match the system's
                                        # open files limit usually set in /etc/sysctl.conf and /etc/security/limits.conf
                                        # In systemd managed systems this limit must also be set in:
                                        # - /etc/systemd/system/mysql.service.d/override.conf (for MySQL 5.7+ in Ubuntu) or
                                        # - /etc/systemd/system/mysqld.service.d/override.conf (for MySQL 5.7+ in CentOS) or
                                        # - /etc/systemd/system/mariadb.service.d/override.conf (for MariaDB)
                                        # otherwise changing open_files_limit will have no effect.
                                        #
                                        # To edit the right file execute:
                                        # $ systemctl edit mysql (or mysqld or mariadb)
                                        # and set "LimitNOFILE=" to something like 100000 or more (depending on your system limits for MySQL)
                                        # or use "LimitNOFILE=infinity" for MariaDB only.
                                        # Finally merge the changes with:
                                        # $ systemctl daemon-reload; systemctl restart mysql (or mysqld or mariadb)

 max_heap_table_size             = 128M  # Increase to 256M, 512M or 1G if you have lots of temporary tables because of missing indices in JOINs
 tmp_table_size                  = 128M  # Use same value as max_heap_table_size

 # === Search Settings ===
 ft_min_word_len                 = 3     # Minimum length of words to be indexed for search results

 # === Binary Logging ===
 disable_log_bin                 = 1     # Binary logging disabled by default
 #log_bin                                # To enable binary logging, uncomment this line & only one of the following 2 lines
                                        # that corresponds to your actual MySQL/MariaDB version.
                                        # Remember to comment out the line with "disable_log_bin".
 #expire_logs_days               = 1     # Keep logs for 1 day - For MySQL 5.x & MariaDB before 10.6 only
 #binlog_expire_logs_seconds     = 86400 # Keep logs for 1 day (in seconds) - For MySQL 8+ & MariaDB 10.6+ only

 # === Error & Slow Query Logging ===
 log_error                       = /var/lib/mysql/mysql_error.log
 #log_error_verbosity            = 1     # 1 for ERROR, 2 for ERROR, WARNING, 3 for ERROR, WARNING, INFORMATION (MySQL only)
                                        # Set to 1 to prevent flooding your mysql_error.log to GBs with deprecation warnings
 log_queries_not_using_indexes   = 0     # Disabled on production
 long_query_time                 = 5
 slow_query_log                  = 0     # Disabled on production
 slow_query_log_file             = /var/lib/mysql/mysql_slow.log

 [mysqldump]
 # Variable reference
 # For MySQL 5.7+:  https://dev.mysql.com/doc/refman/5.7/en/mysqldump.html
 # For MariaDB:     https://mariadb.com/kb/en/library/mysqldump/
 quick
 quote_names
 max_allowed_packet              = 1024M
	# === Optimized my.cnf configuration for MySQL/MariaDB (on cPanel/WHM servers) ===
	#
	# by Fotis Evangelou, developer of Engintron (engintron.com)
	#
	# ~ Updated September 2024 ~
	#
	#
	# The settings provided below are a starting point for a 8-16 GB RAM server with 4-8 CPU cores.
	# If you have different resources available you should adjust accordingly to save CPU, RAM & disk I/O usage.
	#
	# The settings marked with a specific comment or the word "UPD" (after the value)
	# should be adjusted for your system by using database diagnostics tools like:
	#
	# https://github.com/major/MySQLTuner-perl
	# or
	# https://github.com/BMDan/tuning-primer.sh
	#
	# Run either of these scripts before optimizing your database, at least 1 hr after the optimization & finally
	# at least once a day for 3 days (without restarting the database) to see how your server performs and if you need
	# to re-adjust anything. The more MySQL/MariaDB runs without restarting, the more usage data it gathers, so these
	# diagnostics scripts will report in mode detail how MySQL/MariaDB performs.
	#
	#
	# IMPORTANT NOTE: If there is NO comment after a setting value, then 99,9% of the times you won't need to adjust it.
	#
	#
	# --- THINGS TO DO AFTER YOU UPDATE MY.CNF - TROUBLESHOOTING ---
	#
	# If any terminal commands are mentioned, make sure you execute them as "root" user.
	#
	# If MySQL or MariaDB cannot start (or restart), then perform the following actions.
	#
	# 1. If the server had the stock database configuration and you added or updated any
	# "innodb_log_*" settings (as suggested below), then execute these commands ONLY
	# the first time you apply this configuration:
	#
	# $ touch /var/lib/mysql/mysql.sock
	# $ touch /var/lib/mysql/mysql.pid
	# $ chown -R mysql:mysql /var/lib/mysql
	# $ /scripts/restartsrv_mysql
	#
	# or use the shorthand command:
	# $ touch /var/lib/mysql/mysql.sock; touch /var/lib/mysql/mysql.pid; chown -R mysql:mysql /var/lib/mysql; /scripts/restartsrv_mysql
	#
	# IMPORTANT: If you edit this file from the Engintron WHM app in cPanel/WHM,
	# then you DO NOT need to execute the above terminal commands. When you save
	# the file through the Engintron WHM app, these terminal commands will be
	# executed automatically after the file is saved on disk.
	#
	# 2. If the setting "bind-address" is not commented out, then make sure the file /etc/hosts is
	# properly configured. A good example of a "clean" /etc/hosts file is something like this:
	#
	# 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
	# ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
	# 1.2.3.4 hostname.domain.tld hostname # <-- Replace accordingly!
	#
	# Finally restart the database using the related cPanel script:
	#
	# $ /scripts/restartsrv_mysql
	#
	# 3. If the database service cannot restart even after the first 2 steps, make sure the database data folder
	# (common for either MySQL or MariaDB) "/var/lib/mysql" is owned by the "mysql" user AND group.
	# Additionally, the folder itself can have 0751 or 0755 file permissions. To fix it, simply do this:
	# $ chown -R mysql:mysql /var/lib/mysql
	# $ chmod 0755 /var/lib/mysql
	#
	# Finally restart the database using the related cPanel script:
	#
	# $ /scripts/restartsrv_mysql
	#
	# 4. Adjust SQL settings under "Tweak Settings" in WHM:
	# After applying the optimized my.cnf file, you'll also want to DISABLE the following 3 settings
	# in the "SQL" tab of Tweak Settings in WHM:
	#
	# - Allow cPanel & WHM to determine the best value for your MySQL open_files_limit configuration?
	# - Allow cPanel & WHM to determine the best value for your MySQL max_allowed_packet configuration?
	# - Allow cPanel & WHM to determine the best value for your MySQL innodb_buffer_pool_size configuration?
	#
	#
	# ~ FIN ~

	[mysql]
	port = 3306
	socket = /var/lib/mysql/mysql.sock

	[mysqld]
	# === Required Settings ===
	basedir = /usr
	bind_address = 127.0.0.1 # Change to 0.0.0.0 to allow remote connections
	datadir = /var/lib/mysql
	#default_authentication_plugin = mysql_native_password # Enable in MySQL 8+ or MariaDB 10.6+ for backwards compatibility with common CMSs
	max_allowed_packet = 256M
	max_connect_errors = 1000000
	pid_file = /var/lib/mysql/mysql.pid
	port = 3306
	skip_external_locking
	socket = /var/lib/mysql/mysql.sock
	tmpdir = /tmp
	user = mysql

	# === SQL Compatibility Mode ===
	# Enable for b/c with databases created in older MySQL/MariaDB versions
	# (e.g. when using null dates)
	#sql_mode = ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION,ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES
	# For maximum compatibility, just use:
	#sql_mode = ""

	# === InnoDB Settings ===
	default_storage_engine = InnoDB
	innodb_buffer_pool_instances = 4 # Use 1 instance per 1GB of InnoDB pool size - max is 64
	innodb_buffer_pool_size = 4G # Use up to 70-80% of RAM
	innodb_file_per_table = 1
	innodb_flush_log_at_trx_commit = 0
	innodb_flush_method = O_DIRECT
	innodb_log_buffer_size = 16M
	innodb_log_file_size = 1G
	innodb_sort_buffer_size = 4M # UPD - Defines how much data is read into memory for sorting operations before writing to disk (default is 1M / max is 64M)
	innodb_stats_on_metadata = 0
	#innodb_use_fdatasync = 1 # Only (!) for MySQL v8.0.26+

	#innodb_temp_data_file_path = ibtmp1:64M:autoextend:max:20G # Control the maximum size for the ibtmp1 file
	#innodb_thread_concurrency = 4 # Optional: Set to the number of CPUs on your system (minus 1 or 2) to better
	# contain CPU usage. E.g. if your system has 8 CPUs, try 6 or 7 and check
	# the overall load produced by MySQL/MariaDB.
	innodb_read_io_threads = 64
	innodb_write_io_threads = 64
	#innodb_io_capacity = 2000 # Depends on the storage tech - use 2000 for SSD, more for NVMe
	#innodb_io_capacity_max = 4000 # Usually double the value of innodb_io_capacity

	# === MyISAM Settings ===
	# The following 3 options are ONLY supported by MariaDB & up to MySQL 5.7
	# Do NOT un-comment on MySQL 8.x+
	#query_cache_limit = 4M # UPD
	#query_cache_size = 64M # UPD
	#query_cache_type = 1 # Enabled by default

	key_buffer_size = 16M # UPD

	low_priority_updates = 1
	concurrent_insert = 2

	# === Connection Settings ===
	max_connections = 90 # UPD - Important: high no. of connections = high RAM consumption

	back_log = 512
	thread_cache_size = 100
	thread_stack = 192K

	interactive_timeout = 180
	wait_timeout = 180

	# For MySQL 5.7+ only (disabled by default)
	#max_execution_time = 90000 # Set a timeout limit for SELECT statements (value in milliseconds).
	# This option may be useful to address aggressive crawling on large sites,
	# but it can also cause issues (e.g. with backups). So use with extreme caution and test!
	# More info at: https://dev.mysql.com/doc/refman/5.7/en/server-system-variables.html#sysvar_max_execution_time

	# For MariaDB 10.1.1+ only (disabled by default)
	#max_statement_time = 90 # The equivalent of "max_execution_time" in MySQL 5.7+ (set above)
	# The variable is of type double, thus you can use subsecond timeout.
	# For example you can use value 0.01 for 10 milliseconds timeout.
	# More info at: https://mariadb.com/kb/en/aborting-statements/

	# === Buffer Settings ===
	# Handy tip for managing your database's RAM usage:
	# The following values should be treated carefully as they are added together and then multiplied by your "max_connections" value.
	# Other options will also add up to RAM consumption (e.g. tmp_table_size). So don't go switching your "join_buffer_size" to 1G, it's harmful & inefficient.
	# Use one of the database diagnostics tools mentioned at the top of this file to count your database's potential total RAM usage, so you know if you are within
	# reasonable limits. Remember that other services will require enough RAM to operate properly (like Apache or PHP-FPM), so set your limits wisely.
	join_buffer_size = 4M # UPD
	read_buffer_size = 3M # UPD
	read_rnd_buffer_size = 4M # UPD
	sort_buffer_size = 4M # UPD

	# === Table Settings ===
	# In systemd managed systems like Ubuntu 16.04+ or CentOS 7+, you need to perform an extra action for table_open_cache & open_files_limit
	# to be overriden (also see comment next to open_files_limit).
	# E.g. for MySQL 5.7, please check: https://dev.mysql.com/doc/refman/5.7/en/using-systemd.html
	# and for MariaDB check: https://mariadb.com/kb/en/library/systemd/
	table_definition_cache = 50000 # UPD
	table_open_cache = 50000 # UPD
	open_files_limit = 60000 # UPD - This can be 2x to 3x the table_open_cache value or match the system's
	# open files limit usually set in /etc/sysctl.conf and /etc/security/limits.conf
	# In systemd managed systems this limit must also be set in:
	# - /etc/systemd/system/mysql.service.d/override.conf (for MySQL 5.7+ in Ubuntu) or
	# - /etc/systemd/system/mysqld.service.d/override.conf (for MySQL 5.7+ in CentOS) or
	# - /etc/systemd/system/mariadb.service.d/override.conf (for MariaDB)
	# otherwise changing open_files_limit will have no effect.
	#
	# To edit the right file execute:
	# $ systemctl edit mysql (or mysqld or mariadb)
	# and set "LimitNOFILE=" to something like 100000 or more (depending on your system limits for MySQL)
	# or use "LimitNOFILE=infinity" for MariaDB only.
	# Finally merge the changes with:
	# $ systemctl daemon-reload; systemctl restart mysql (or mysqld or mariadb)

	max_heap_table_size = 128M # Increase to 256M, 512M or 1G if you have lots of temporary tables because of missing indices in JOINs
	tmp_table_size = 128M # Use same value as max_heap_table_size

	# === Search Settings ===
	ft_min_word_len = 3 # Minimum length of words to be indexed for search results

	# === Binary Logging ===
	disable_log_bin = 1 # Binary logging disabled by default
	#log_bin # To enable binary logging, uncomment this line & only one of the following 2 lines
	# that corresponds to your actual MySQL/MariaDB version.
	# Remember to comment out the line with "disable_log_bin".
	#expire_logs_days = 1 # Keep logs for 1 day - For MySQL 5.x & MariaDB before 10.6 only
	#binlog_expire_logs_seconds = 86400 # Keep logs for 1 day (in seconds) - For MySQL 8+ & MariaDB 10.6+ only

	# === Error & Slow Query Logging ===
	log_error = /var/lib/mysql/mysql_error.log
	#log_error_verbosity = 1 # 1 for ERROR, 2 for ERROR, WARNING, 3 for ERROR, WARNING, INFORMATION (MySQL only)
	# Set to 1 to prevent flooding your mysql_error.log to GBs with deprecation warnings
	log_queries_not_using_indexes = 0 # Disabled on production
	long_query_time = 5
	slow_query_log = 0 # Disabled on production
	slow_query_log_file = /var/lib/mysql/mysql_slow.log

	[mysqldump]
	# Variable reference
	# For MySQL 5.7+: https://dev.mysql.com/doc/refman/5.7/en/mysqldump.html
	# For MariaDB: https://mariadb.com/kb/en/library/mysqldump/
	quick
	quote_names
	max_allowed_packet = 1024M