Installing OpenCV 3.1 on Ubuntu 16.04 with Cuda 8 support

OpenCV-3.1-Ubuntu-16.04-Cuda-8.md

This is a guide for installing OpenCV 3.1 on Ubuntu 16.04 with Cuda 8 support. This has been tested using a system with a GeForce GTX 1060 and on one with a GeForce GTX 1080.

Nvidia Drivers with Compiz

Install Nvidia drivers

# Start clean
sudo apt purge nvidia-*
# Add the PPA
sudo add-apt-repository ppa:graphics-drivers/ppa
sudo apt update

For Cuda support we need the compatible driver version (generally NOT the newest). For Cuda 8 driver version 367.57 was used.

sudo apt-get install nvidia-367

UPDATE: now it seems that nvidia-367 actually installs nvidia-375 due to security reasons. See https://devtalk.nvidia.com/default/topic/1000667/cuda-setup-and-installation/failed-to-initialize-nvml-driver-library-version-mismatch/

Fixing Unity if it doesn't boot (from http://askubuntu.com/questions/760356/ubuntu-16-04-unity-no-desktop-just-background-wallpaper):

sudo rm -fr ~/.cache/compizconfig-1
sudo rm -fr ~/.compiz

Then try this if your session not loading :

sudo rm -fr ~/.Xauthority
sudo rm -fr ~/.config/autostart

Reinstall compiz

sudo apt-get install --reinstall ubuntu-desktop unity compizconfig-settings-manager upstart

In addition on some systems the secure boot BIOS settings have to be modified. On the Asus x99-a II motherboard the Secure Boot option is set to "Windows Only" by default. Setting it to "Other OS" allows Ubuntu to use Nvidia drivers (see http://askubuntu.com/a/761281)

Cuda Setup

Install CUDA 8 and CuDNN 5.1 from Nvidia's developer site: https://developer.nvidia.com/cuda-downloads Download cuda 8.0 and run the following:

cd ~/Downloads
sudo dpkg -i cuda-repo-ubuntu1604-8-0-local_8.0.44-1_amd64.deb
sudo apt update
sudo apt install cuda

NOTE: techincally the following step is not required for OpenCV since this is the Cuda Deep Learning library, but it is included here for conveneince (it is required for libraries such as Caffe).
Get the "cuDNN v5.1 Library for Linux" from https://developer.nvidia.com/rdp/cudnn-download (need to register) and then run the following:

sudo tar -xvf cudnn-8.0-linux-x64-v5.1.tgz -C /usr/local

Then add the following to your ~/.bashrc

vim ~/.bashrc
export LD_LIBRARY_PATH=/usr/local/cuda/lib64
export PATH=$PATH:/usr/local/cuda-8.0/bin

OpenCV Setup

sudo apt-get install cmake cmake-qt-gui

Get OpenCV 3.1 from this fork for CUDA 8 support:

mkdir ~/code/opencv-3.1.0
cd ~/code/opencv-3.1.0
git clone [email protected]:daveselinger/opencv.git .
git checkout 3.1.0-with-cuda8

See the following for more details: opencv/opencv#6677

Adapted from this guide: https://github.com/BVLC/caffe/wiki/Ubuntu-16.04-or-15.10-Installation-Guide Package pre-reqs

sudo apt install --assume-yes build-essential cmake git pkg-config unzip ffmpeg qtbase5-dev python-dev python3-dev python-numpy python3-numpy
sudo apt install libhdf5-dev
sudo apt install --assume-yes libgtk-3-dev libdc1394-22 libdc1394-22-dev libjpeg-dev libpng12-dev libtiff5-dev libjasper-dev
sudo apt install --assume-yes libavcodec-dev libavformat-dev libswscale-dev libxine2-dev libgstreamer0.10-dev libgstreamer-plugins-base0.10-dev
sudo apt install --assume-yes libv4l-dev libtbb-dev libfaac-dev libmp3lame-dev libopencore-amrnb-dev libopencore-amrwb-dev libtheora-dev
sudo apt install --assume-yes libvorbis-dev libxvidcore-dev v4l-utils

Configure CMake

cd ~/code/opencv-3.1.0
mkdir build
cd build
cmake -D CMAKE_BUILD_TYPE=RELEASE -D CMAKE_INSTALL_PREFIX=/usr/local -D WITH_CUDA=ON -D WITH_CUBLAS=ON -D WITH_TBB=ON -D WITH_V4L=ON -D WITH_QT=ON -D WITH_OPENGL=ON -D BUILD_PERF_TESTS=OFF -D BUILD_TESTS=OFF -DCUDA_NVCC_FLAGS="-D_FORCE_INLINES" ..

You should see the following after cmake finishes:

--   Other third-party libraries:
...
--     Use Cuda:                    YES (ver 8.0)
...
--   NVIDIA CUDA
--     Use CUFFT:                   YES
--     Use CUBLAS:                  YES
--     USE NVCUVID:                 NO
--     NVIDIA GPU arch:             20 21 30 35
--     NVIDIA PTX archs:            30
--     Use fast math:               NO

Finally build OpenCV!

# Build!
make -j $(($(nproc) + 1))
sudo make install

Can i ask u a question ???

Error when try this cmake -D CMAKE_BUILD_TYPE=RELEASE -D CMAKE_INSTALL_PREFIX=/usr/local -D WITH_CUDA=ON -D WITH_CUBLAS=ON -D WITH_TBB=ON -D WITH_V4L=ON -D WITH_QT=ON -D WITH_OPENGL=ON -D BUILD_PERF_TESTS=OFF -D BUILD_TESTS=OFF -DCUDA_NVCC_FLAGS="-D_FORCE_INLINES" ..

This is the error message
CMake Error: The source directory "/home/panjaitan/code/opencv-3.1.0" does not appear to contain CMakeLists.txt.
Specify --help for usage, or press the help button on the CMake GUI.

anyone can help?

Can i ask u a question ???

Error when try this cmake -D CMAKE_BUILD_TYPE=RELEASE -D CMAKE_INSTALL_PREFIX=/usr/local -D WITH_CUDA=ON -D WITH_CUBLAS=ON -D WITH_TBB=ON -D WITH_V4L=ON -D WITH_QT=ON -D WITH_OPENGL=ON -D BUILD_PERF_TESTS=OFF -D BUILD_TESTS=OFF -DCUDA_NVCC_FLAGS="-D_FORCE_INLINES" ..

This is the error message
CMake Error: The source directory "/home/panjaitan/code/opencv-3.1.0" does not appear to contain CMakeLists.txt.
Specify --help for usage, or press the help button on the CMake GUI.

If you are still unable to solve this, you have to run CMAKE command inside build folder in /home/panjaitan/code/opencv-3.1.0.
To do that first navigate to /home/panjaitan/code/opencv-3.1.0 using this command: cd /home/panjaitan/code/opencv-3.1.0
Then create the build folder like so: mkdir build
Lastly go into build directory by: cd build
Then run the CMAKE command

Thanks for that, initial attempts to get this installed failed due to an incompatibility with Cuda 8.0.
The instructions above ran to completion, but it also wanted gstreamer which can be installed with
sudo apt-get install libgstreamer-plugins-base1.0-dev debhelper gstreamer1.0-doc
as per baedert/corebird#189

Then, there was the issue that it didn't really install cv2 into my python 3.6 library (in its pyenv-virtualenv). It now works!! Here is a tweak on @filitchp ' s CMAKE command (run with the pyenv-virtualenv selected in the build directory) I used to get it to work:

cmake -D CMAKE_BUILD_TYPE=RELEASE \
-D CMAKE_INSTALL_PREFIX=$(python3 -c "import sys; print(sys.prefix)") \
-D PYTHON_EXECUTABLE=/home/aktivkohle/.pyenv/shims/python3 \
-D WITH_CUDA=ON \
-D WITH_CUBLAS=ON \
-D WITH_TBB=ON \
-D WITH_V4L=ON \
-D WITH_QT=ON \
-D WITH_OPENGL=ON \
-D BUILD_PERF_TESTS=OFF \
-D BUILD_TESTS=OFF \
-DCUDA_NVCC_FLAGS="-D_FORCE_INLINES"  \
..

Anyone know how to run example code opencv with cuda ?

i have dual os, windows and ubuntu, is that okay if i run this in my ubuntu os ?

Got an error while building it. Here's what it says:

[ 68%] Building CXX object modules/cudawarping/CMakeFiles/opencv_cudawarping.dir/src/resize.cpp.o
[ 68%] Linking CXX shared library ../../lib/libopencv_cudawarping.so
[ 68%] Built target opencv_cudawarping
Makefile:160: recipe for target 'all' failed
make: *** [all] Error 2

I followed all the steps except installing drivers (cuz it's already in) and cuda8.0 is available. My machine is Ubuntu 16.04 with GTX TitanXp. Any thoughts?

Never mind, actually I didn't checkout a branch indicated in the instruction. Everything went well. Thanks!

modules/core/CMakeFiles/pch_Generate_opencv_core.dir/build.make:62: recipe for target 'modules/core/precomp.hpp.gch/opencv_core_RELEASE.gch' failed
modules/viz/CMakeFiles/pch_Generate_opencv_viz.dir/build.make:62: recipe for target 'modules/viz/precomp.hpp.gch/opencv_viz_RELEASE.gch' failed
make[2]: *** [modules/viz/precomp.hpp.gch/opencv_viz_RELEASE.gch] Error 1
CMakeFiles/Makefile2:3432: recipe for target 'modules/viz/CMakeFiles/pch_Generate_opencv_viz.dir/all' failed
make[1]: *** [modules/viz/CMakeFiles/pch_Generate_opencv_viz.dir/all] Error 2
make[2]: *** [modules/core/precomp.hpp.gch/opencv_core_RELEASE.gch] Error 1
make[1]: *** Waiting for unfinished jobs....
CMakeFiles/Makefile2:1896: recipe for target 'modules/core/CMakeFiles/pch_Generate_opencv_core.dir/all' failed
make[1]: *** [modules/core/CMakeFiles/pch_Generate_opencv_core.dir/all] Error 2
[ 19%] Generating precomp.hpp.gch/opencv_cudaimgproc_RELEASE.gch
[ 19%] Generating precomp.hpp.gch/opencv_cudabgsegm_RELEASE.gch
[ 19%] Generating precomp.hpp.gch/opencv_cudafilters_RELEASE.gch
[ 19%] Built target pch_Generate_opencv_cudabgsegm
[ 19%] Built target pch_Generate_opencv_cudafilters
[ 19%] Built target pch_Generate_opencv_cudaimgproc
Makefile:162: recipe for target 'all' failed
make: *** [all] Error 2

showing this error. can anybody help?

Hi,
I have installed the Opencv 3.1 with the following URL:https://www.pyimagesearch.com/2016/07/11/compiling-opencv-with-cuda-support/, post installation, there is no cv2.so file created in /usr/local/lib/python2.7/site-packages or build/lib. Please find the screen shot

Can anyone pls help me fix this, as its crucial for my projects.