Skip to content

Instantly share code, notes, and snippets.

@flaviut

flaviut/Setting up Emporia Vue 2 with ESPHome.md

Last active August 22, 2024 18:14
Show Gist options
  • Save flaviut/93a1212c7b165c7674693a45ad52c512 to your computer and use it in GitHub Desktop.
Save flaviut/93a1212c7b165c7674693a45ad52c512 to your computer and use it in GitHub Desktop.
Download ZIP
Setting up Emporia Vue 2 with ESPHome
@SamSavageSpeed
Copy link

SamSavageSpeed commented Jun 6, 2024 •
edited
Loading

@fabiopbx the current reading doesn't work. I've never been able to figure it out, and there's been some past
discussion where others couldn't figure it out either. I would recommend against using the current sensor.

I'd suggest you use a multimeter with a current clamp (don't touch any metal with your fingers! this stuff can easily kill you!)
to see what's going on and if the kW reading is inaccurate. If you want current, you can always calculate it using power/voltage.

Hello @flaviut,

Are current readings ok now ? What should I add in the yaml in order to expose
them in HA for the small 16 clamps ? Because I'd like to give a try to the following :

emporia-vue-local/esphome#287 (comment)
Thanks in advance for your input. Best regards.

S@M

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment