gistfile1.txt

// ---------------- quantity.rs
/*!
Declares foundational `QuantityT<T,U>` struct upon which fts_units is built.

`QuantityT<T,U>` defines a `Quantity` which stores an `amount` of type `T` with units type `U`. Mathematical operations with `QuantityT<T,U>` values produces new types of `QuantityT` with a different `U` type.

If `U` is zero sized then all the type checking done and compile time and boils down to nothing. No run-time overhead for either CPU or memory.

Mathematical operations for `QuantityT<T,U>` are defined so long as they are independently defined for both `T` and `U`.
*/

use std::fmt;
use std::marker::PhantomData;

use crate::ops::*;

// --------------------------------
// Trait declarations
// --------------------------------

/// Must be implemented for `T` in `QuantityT<T,U>`.
pub trait Amount: Copy + Clone {}

/// Helper for performing generic computations with `QuantityT<T,U>` types.
pub trait Quantity {
    type AmountType: Amount;
    type UnitsType;

    fn new(amount: Self::AmountType) -> Self;
    fn amount(&self) -> Self::AmountType;
}

/// Helper for converting units. For example from Meters to Kilometers.
///
/// ```rust
/// # use fts_units::si_system::quantities::f32::*;
/// # use fts_units::quantity::ConvertUnits;
/// let d = Kilometers::new(15.3);
/// let t = Hours::new(2.7);
/// let kph : KilometersPerHour = d / t;
///
/// let mps : MetersPerSecond = kph.convert_into();
/// let mps = MetersPerSecond::convert_from(kph);
/// ```
pub trait ConvertUnits<T> {
    fn convert_from(v: T) -> Self;
    fn convert_into(self) -> T;
}

/// Helpers for casting `T` in `QuantityT<T,U>`.
///
/// ```rust
/// # use fts_units::si_system::quantities::*;
/// # use fts_units::quantity::{CastAmount, Quantity};
/// let m = Meters::<f32>::new(7.73);
/// let i : Meters<i32> = m.cast_into();
/// assert_eq!(i.amount(), 7);
/// ```
pub trait CastAmount<T> {
    fn cast_from(v: T) -> Self;
    fn cast_into(self) -> T;
}

// --------------------------------
// Struct declarations
// --------------------------------

/// Foundational struct used by all run-time quantities.
#[derive(Copy, Clone, Debug, Default, Eq, PartialEq)]
pub struct QuantityT<T, U>
where
    T: Amount,
{
    amount: T,
    _u: PhantomData<U>,
}

// --------------------------------
// QuantityT impls
// --------------------------------
impl<T, U> QuantityT<T, U>
where
    T: Amount,
{
    pub fn new(amount: T) -> QuantityT<T, U> {
        QuantityT {
            amount: amount,
            _u: PhantomData,
        }
    }
}

impl<T, U> Quantity for QuantityT<T, U>
where
    T: Amount,
{
    type AmountType = T;
    type UnitsType = U;

    fn new(amount: T) -> Self {
        QuantityT::<T, U>::new(amount)
    }

    fn amount(&self) -> Self::AmountType {
        self.amount
    }
}

impl<T, Q> std::ops::Add<Self> for QuantityT<T, Q>
where
    T: Amount + std::ops::Add<T>,
    Q: std::ops::Add<Q>,
    AddOutput<T, T>: Amount,
{
    type Output = QuantityT<AddOutput<T, T>, AddOutput<Q, Q>>;

    fn add(self, other: Self) -> Self::Output {
        Self::Output::new(self.amount + other.amount)
    }
}

impl<T, Q> std::ops::Sub<Self> for QuantityT<T, Q>
where
    T: Amount + std::ops::Sub<T>,
    Q: std::ops::Sub<Q>,
    SubOutput<T, T>: Amount,
{
    type Output = QuantityT<SubOutput<T, T>, SubOutput<Q, Q>>;

    fn sub(self, other: Self) -> Self::Output {
        Self::Output::new(self.amount - other.amount)
    }
}

impl<T, Q0, Q1> std::ops::Mul<QuantityT<T, Q1>> for QuantityT<T, Q0>
where
    T: Amount + std::ops::Mul<T>,
    Q0: std::ops::Mul<Q1>,
    MulOutput<T, T>: Amount,
{
    type Output = QuantityT<MulOutput<T, T>, MulOutput<Q0, Q1>>;

    fn mul(self, other: QuantityT<T, Q1>) -> Self::Output {
        Self::Output::new(self.amount * other.amount)
    }
}

impl<T, Q0, Q1> std::ops::Div<QuantityT<T, Q1>> for QuantityT<T, Q0>
where
    T: Amount + std::ops::Div<T>,
    Q0: std::ops::Div<Q1>,
    DivOutput<T, T>: Amount,
{
    type Output = QuantityT<DivOutput<T, T>, DivOutput<Q0, Q1>>;

    fn div(self, other: QuantityT<T, Q1>) -> Self::Output {
        Self::Output::new(self.amount / other.amount)
    }
}

impl<T, U> std::fmt::Display for QuantityT<T, U>
where
    T: std::fmt::Display + Amount,
    U: std::fmt::Display + Default,
{
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        write!(f, "{} {}", self.amount, U::default())
    }
}

impl<T, U> Invert for QuantityT<T, U>
where
    T: Invert + Amount,
    U: Invert,
    InvertOutput<T>: Amount,
{
    type Output = QuantityT<InvertOutput<T>, InvertOutput<U>>;

    fn invert(self) -> Self::Output {
        Self::Output::new(self.amount.invert())
    }
}

impl<T, U> Sqrt for QuantityT<T, U>
where
    T: num_traits::float::Float + Amount,
    U: Sqrt,
{
    type Output = QuantityT<T, SqrtOutput<U>>;

    fn sqrt(self) -> Self::Output {
        Self::Output::new(self.amount.sqrt())
    }
}

impl<T, U> std::convert::From<T> for QuantityT<T, U>
where
    T: Amount,
{
    fn from(value: T) -> Self {
        Self::new(value)
    }
}

impl Amount for i8 {}
impl Amount for i16 {}
impl Amount for i32 {}
impl Amount for i64 {}
impl Amount for i128 {}
impl Amount for u8 {}
impl Amount for u16 {}
impl Amount for u32 {}
impl Amount for u64 {}
impl Amount for u128 {}
impl Amount for f32 {}
impl Amount for f64 {}


// ------------------- ratio.rs
/*!
Storage and operations for compile-type Ratio types.
*/

use std::marker::PhantomData;
use typenum::consts::*;
use typenum::int::{NInt, PInt};
use typenum::{Integer, NonZero};

use crate::ops::*;

// --------------------------------
// Trait declarations
// --------------------------------

/// Helper to faciliate working with Ratio types generically.
pub trait Ratio {
    fn numerator() -> i64;
    fn denominator() -> i64;
}

// --------------------------------
// Struct declarations
// --------------------------------

/// Special type to represent a Zero Ratio.
#[derive(Copy, Clone, Debug, Default, Eq, PartialEq)]
pub struct RatioZero;

/// Ratio type with positive, non-zero numerator and denominator.
#[derive(Copy, Clone, Debug, Default, Eq, PartialEq)]
pub struct RatioT<NUM, DEN>
where
    NUM: Integer + NonZero,
    DEN: Integer + NonZero,
{
    _num: PhantomData<NUM>,
    _den: PhantomData<DEN>,
}

// --------------------------------
// Ratio impls
// --------------------------------
impl<NUM, DEN> Ratio for RatioT<NUM, DEN>
where
    NUM: Integer + NonZero,
    DEN: Integer + NonZero,
{
    fn numerator() -> i64 {
        NUM::I64
    }
    fn denominator() -> i64 {
        DEN::I64
    }
}

impl<N, D> NonZero for RatioT<N, D>
where
    N: Integer + NonZero,
    D: Integer + NonZero,
{
}

impl Ratio for RatioZero {
    fn numerator() -> i64 {
        0
    }
    fn denominator() -> i64 {
        0
    }
}

impl Xor<RatioZero> for RatioZero
where
    RatioZero: Default,
{
    type Output = RatioZero;

    fn xor(self, _other: RatioZero) -> Self::Output {
        Default::default()
    }
}

impl<N, D> Xor<RatioT<N, D>> for RatioT<N, D>
where
    N: Integer + NonZero,
    D: Integer + NonZero,
    RatioT<N, D>: Default,
{
    type Output = RatioT<N, D>;

    fn xor(self, _other: RatioT<N, D>) -> Self::Output {
        Default::default()
    }
}

impl<N, D> Xor<RatioZero> for RatioT<N, D>
where
    N: Integer + NonZero,
    D: Integer + NonZero,
    RatioT<N, D>: Default,
{
    type Output = RatioT<N, D>;

    fn xor(self, _other: RatioZero) -> Self::Output {
        Default::default()
    }
}

impl<N, D> Xor<RatioT<N, D>> for RatioZero
where
    N: Integer + NonZero,
    D: Integer + NonZero,
    RatioT<N, D>: Default,
{
    type Output = RatioT<N, D>;

    fn xor(self, _other: RatioT<N, D>) -> Self::Output {
        Default::default()
    }
}

impl<E> ReduceWith<E> for RatioZero {
    type Output = RatioZero;

    fn reduce_with(self, _other: E) -> Self::Output {
        Default::default()
    }
}

impl<N, D> ReduceWith<Z0> for RatioT<N, D>
where
    Self: Default,
    N: Integer + NonZero,
    D: Integer + NonZero,
{
    type Output = RatioZero;

    fn reduce_with(self, _other: Z0) -> Self::Output {
        Default::default()
    }
}

impl<N, D, U> ReduceWith<PInt<U>> for RatioT<N, D>
where
    Self: Default,
    N: Integer + NonZero,
    D: Integer + NonZero,
    U: typenum::Unsigned + NonZero,
{
    type Output = Self;

    fn reduce_with(self, _other: PInt<U>) -> Self::Output {
        Default::default()
    }
}

impl<N, D, U> ReduceWith<NInt<U>> for RatioT<N, D>
where
    Self: Default,
    N: Integer + NonZero,
    D: Integer + NonZero,
    U: typenum::Unsigned + NonZero,
{
    type Output = Self;

    fn reduce_with(self, _other: NInt<U>) -> Self::Output {
        Default::default()
    }
}



// --------------- ops.rs
//! Traits and helpers to faciliate working with generic Quantities.

// --------------------------------
// Traits
// --------------------------------

/// Helper to reduce Ratios to RatioZero when Exponent becomes zero
pub trait Reduce {
    type Output;
    fn reduce(self) -> Self::Output;
}

/// Helper to reduce Ratios to RatioZero when Exponent becomes zero
pub trait ReduceWith<T> {
    type Output;
    fn reduce_with(self, other: T) -> Self::Output;
}

/// Provide generic Invert interface for invertable types (such as floats)
pub trait Invert {
    type Output;

    fn invert(self) -> Self::Output;
}

/// Provide generic Sqrt interface for supported types (such as floats)
pub trait Sqrt {
    type Output;

    fn sqrt(self) -> Self::Output;
}

/// Used only at the type level for Xor'ing Zero and Non-Zero Ratios
pub trait Xor<T> {
    type Output;
    fn xor(self, other: T) -> Self::Output;
}

// --------------------------------
// Utilities
// --------------------------------
pub type AddOutput<T, U> = <T as std::ops::Add<U>>::Output;
pub type SubOutput<T, U> = <T as std::ops::Sub<U>>::Output;
pub type MulOutput<T, U> = <T as std::ops::Mul<U>>::Output;
pub type DivOutput<T, U> = <T as std::ops::Div<U>>::Output;
pub type XorOutput<T, U> = <T as Xor<U>>::Output;

pub type MulOutput3<T, U, V> = MulOutput<MulOutput<T, U>, V>;
pub type MulOutput4<T, U, V, W> = MulOutput<MulOutput<MulOutput<T, U>, V>, W>;

pub type InvertOutput<T> = <T as Invert>::Output;
pub type SqrtOutput<T> = <T as Sqrt>::Output;
pub type ReduceOutput<T> = <T as Reduce>::Output;
pub type ReduceWithOutput<T, U> = <T as ReduceWith<U>>::Output;

// --------------------------------
// Impls for built-in types
// --------------------------------
impl Invert for f32 {
    type Output = f32;
    fn invert(self) -> Self::Output {
        1.0 / self
    }
}

impl Invert for f64 {
    type Output = f64;
    fn invert(self) -> Self::Output {
        1.0 / self
    }
}


// ----------- si_system.rs
/*!
Structs and traits to enable SI Unit quantities.

There are three core structs with matching traits.

```no_compile
pub struct SIUnitsT<RATIOS,EXPONENTS> { ... }
pub struct SIRatiosT<LENGTH, MASS, TIME> { ... }
pub struct SIExponentsT<LENGTH, MASS, TIME> { ... }

pub trait SIUnits { type Ratios: SIRatios; type Exponents: SIExponents; }
pub trait SIRatios { type Length; type Mass; type Time; }
pub trait SIExponents { type Length; type Mass; type Time; }
```

`SIUnitsT` has `RATIOS` and `EXPONENTS`. Traits such as `std::ops::Add` are implemented for `SIUnitsT<R,E>` when `R` and `E` are the same. `std::ops::mul` is implemented for any pair of exponents, but with an `Xor` restriction on `R`.
*/

use std::fmt;
use std::marker::PhantomData;
use typenum::consts::*;
use typenum::{Diff, Integer, NonZero, PartialDiv, Sum};

use crate::ops::*;
use crate::quantity::*;
use crate::ratio::*;
use crate::typenum_ext::*;

pub use self::ratios::*;

// --------------------------------
// SI System Traits
// --------------------------------

/// Helper to faciliate generic operations on `SIUnitsT<R,E>`.
pub trait SIUnits {
    type Ratios: SIRatios;
    type Exponents: SIExponents;
}

/// Helper to faciliate generic operations on `SIRatiosT<L,M,T>`.
pub trait SIRatios {
    type Length: Ratio;
    type Mass: Ratio;
    type Time: Ratio;
}

/// Helper to faciliate generic operations on `SIExponentsT<L,M,T>`.
pub trait SIExponents {
    type Length: Integer;
    type Mass: Integer;
    type Time: Integer;
}

// --------------------------------
// SI System Structs
// --------------------------------

/// Foundational type of `si_system`. Holds all Ratios and Exponents as types.
#[derive(Copy, Clone, Debug, Default, Eq, PartialEq)]
pub struct SIUnitsT<RATIOS, EXPONENTS>
where
    RATIOS: SIRatios,
    EXPONENTS: SIExponents,
{
    _r: PhantomData<RATIOS>,
    _e: PhantomData<EXPONENTS>,
}

/// Holds type Ratios for each `si_system` dimension.
#[derive(Copy, Clone, Debug, Default, Eq, PartialEq)]
pub struct SIRatiosT<L, M, T>
where
    L: Ratio,
    M: Ratio,
    T: Ratio,
{
    _l: PhantomData<L>,
    _m: PhantomData<M>,
    _t: PhantomData<T>,
}

/// Holds type exponents for each `si_system` dimension.
#[derive(Copy, Clone, Debug, Default, Eq, PartialEq)]
pub struct SIExponentsT<L, M, T>
where
    L: Integer,
    M: Integer,
    T: Integer,
{
    _l: PhantomData<L>,
    _m: PhantomData<M>,
    _t: PhantomData<T>,
}

/// Internal type used for `SIUnitsT` operations.
#[doc(hidden)]
#[derive(Default)]
pub struct RatioExponentT<R: Ratio, E: Integer> {
    _r: PhantomData<R>,
    _e: PhantomData<E>,
}

/// Internal type used for `SIUnitsT` operations.
#[doc(hidden)]
#[derive(Copy, Clone)]
pub struct AmountT<T: Amount>(T);

// --------------------------------
// impls
// --------------------------------

// Basic invert (always possible)
impl<R, E> Invert for SIUnitsT<R, E>
where
    R: SIRatios,
    E: SIExponents,
    units::Dimensionless: std::ops::Div<Self>,
    DivOutput<units::Dimensionless, Self>: Default,
{
    type Output = DivOutput<units::Dimensionless, Self>;

    fn invert(self) -> Self::Output {
        Default::default()
    }
}

// Basic SIUnitsT add
impl<R, E> std::ops::Add<SIUnitsT<R, E>> for SIUnitsT<R, E>
where
    R: SIRatios,
    E: SIExponents,
{
    type Output = Self;

    fn add(self, _other: Self) -> Self::Output {
        SIUnitsT {
            _r: PhantomData,
            _e: PhantomData,
        }
    }
}

// Basic SIUnitsT subtract
impl<R, E> std::ops::Sub<SIUnitsT<R, E>> for SIUnitsT<R, E>
where
    R: SIRatios,
    E: SIExponents,
{
    type Output = Self;

    fn sub(self, _other: Self) -> Self::Output {
        SIUnitsT {
            _r: PhantomData,
            _e: PhantomData,
        }
    }
}

// SIExponents Add
impl<L0, M0, T0, L1, M1, T1> std::ops::Add<SIExponentsT<L1, M1, T1>> for SIExponentsT<L0, M0, T0>
where
    L0: Integer + std::ops::Add<L1>,
    M0: Integer + std::ops::Add<M1>,
    T0: Integer + std::ops::Add<T1>,
    L1: Integer,
    M1: Integer,
    T1: Integer,
    AddOutput<L0, L1>: Integer,
    AddOutput<M0, M1>: Integer,
    AddOutput<T0, T1>: Integer,
{
    type Output = SIExponentsT<Sum<L0, L1>, Sum<M0, M1>, Sum<T0, T1>>;

    fn add(self, _other: SIExponentsT<L1, M1, T1>) -> Self::Output {
        SIExponentsT {
            _l: PhantomData,
            _m: PhantomData,
            _t: PhantomData,
        }
    }
}

// SIExponents Sub
impl<L0, M0, T0, L1, M1, T1> std::ops::Sub<SIExponentsT<L1, M1, T1>> for SIExponentsT<L0, M0, T0>
where
    L0: Integer + std::ops::Sub<L1>,
    M0: Integer + std::ops::Sub<M1>,
    T0: Integer + std::ops::Sub<T1>,
    L1: Integer,
    M1: Integer,
    T1: Integer,
    SubOutput<L0, L1>: Integer,
    SubOutput<M0, M1>: Integer,
    SubOutput<T0, T1>: Integer,
{
    type Output = SIExponentsT<Diff<L0, L1>, Diff<M0, M1>, Diff<T0, T1>>;

    fn sub(self, _other: SIExponentsT<L1, M1, T1>) -> Self::Output {
        SIExponentsT {
            _l: PhantomData,
            _m: PhantomData,
            _t: PhantomData,
        }
    }
}

/// Multiplying a pair of SIUnits is complicated
/// Ratios: must be XOR-able
///         meters * meters is fine.
///         meters * kilometers is not. The output type is ambiguous.
/// Exponents: can be anything. will be added together
///         meters * meters = meters squared
///         However exponents which become zero must zero out their corresponding ratio
///         10 kilometers per hour * 2 hours = 20 kilometers. The time Ratio was hours, but needs to be zero'd out.
impl<R0, E0, R1, E1> std::ops::Mul<SIUnitsT<R1, E1>> for SIUnitsT<R0, E0>
where
    R0: SIRatios + Xor<R1>,
    E0: SIExponents + std::ops::Add<E1>,
    R1: SIRatios,
    E1: SIExponents,
    XorOutput<R0, R1>: SIRatios + ReduceWith<AddOutput<E0, E1>> + Default,
    AddOutput<E0, E1>: SIExponents + Default,
    ReduceWithOutput<XorOutput<R0, R1>, AddOutput<E0, E1>>: SIRatios + Default,
    ReduceOutput<SIUnitsT<XorOutput<R0, R1>, AddOutput<E0, E1>>>: Default,
{
    type Output = ReduceOutput<SIUnitsT<XorOutput<R0, R1>, AddOutput<E0, E1>>>;

    fn mul(self, _other: SIUnitsT<R1, E1>) -> Self::Output {
        Default::default()
    }
}

/// See coments on `std::ops::Mul<SIUnitsT<_,_>>`
impl<R0, E0, R1, E1> std::ops::Div<SIUnitsT<R1, E1>> for SIUnitsT<R0, E0>
where
    R0: SIRatios + Xor<R1>,
    E0: SIExponents + std::ops::Sub<E1>,
    R1: SIRatios,
    E1: SIExponents,
    XorOutput<R0, R1>: SIRatios + ReduceWith<SubOutput<E0, E1>> + Default,
    SubOutput<E0, E1>: SIExponents + Default,
    ReduceWithOutput<XorOutput<R0, R1>, SubOutput<E0, E1>>: SIRatios + Default,
    ReduceOutput<SIUnitsT<XorOutput<R0, R1>, SubOutput<E0, E1>>>: Default,
{
    type Output = ReduceOutput<SIUnitsT<XorOutput<R0, R1>, SubOutput<E0, E1>>>;

    fn div(self, _other: SIUnitsT<R1, E1>) -> Self::Output {
        Default::default()
    }
}

impl<L, M, T> SIRatios for SIRatiosT<L, M, T>
where
    L: Ratio,
    M: Ratio,
    T: Ratio,
{
    type Length = L;
    type Mass = M;
    type Time = T;
}

impl<L, M, T> SIExponents for SIExponentsT<L, M, T>
where
    L: Integer,
    M: Integer,
    T: Integer,
{
    type Length = L;
    type Mass = M;
    type Time = T;
}

impl<R, E> SIUnits for SIUnitsT<R, E>
where
    R: SIRatios,
    E: SIExponents,
{
    type Ratios = R;
    type Exponents = E;
}

impl<L0, M0, T0, L1, M1, T1> Xor<SIRatiosT<L1, M1, T1>> for SIRatiosT<L0, M0, T0>
where
    L0: Ratio + Xor<L1>,
    M0: Ratio + Xor<M1>,
    T0: Ratio + Xor<T1>,
    L1: Ratio,
    M1: Ratio,
    T1: Ratio,
    XorOutput<L0, L1>: Ratio + Default,
    XorOutput<M0, M1>: Ratio + Default,
    XorOutput<T0, T1>: Ratio + Default,
{
    type Output = SIRatiosT<XorOutput<L0, L1>, XorOutput<M0, M1>, XorOutput<T0, T1>>;

    fn xor(self, _other: SIRatiosT<L1, M1, T1>) -> Self::Output {
        Default::default()
    }
}

impl<L0, M0, T0, L1, M1, T1> Xor<SIExponentsT<L1, M1, T1>> for SIExponentsT<L0, M0, T0>
where
    L0: Integer + Xor<L1>,
    M0: Integer + Xor<M1>,
    T0: Integer + Xor<T1>,
    L1: Integer,
    M1: Integer,
    T1: Integer,
    XorOutput<L0, L1>: Integer + Default,
    XorOutput<M0, M1>: Integer + Default,
    XorOutput<T0, T1>: Integer + Default,
{
    type Output = SIExponentsT<XorOutput<L0, L1>, XorOutput<M0, M1>, XorOutput<T0, T1>>;

    fn xor(self, _other: SIExponentsT<L1, M1, T1>) -> Self::Output {
        Default::default()
    }
}

impl<R0, E0, R1, E1> Xor<SIUnitsT<R1, E1>> for SIUnitsT<R0, E0>
where
    R0: SIRatios + Xor<R1>,
    E0: SIExponents + Xor<E1>,
    R1: SIRatios,
    E1: SIExponents,
    XorOutput<R0, R1>: SIRatios,
    XorOutput<E0, E1>: SIExponents,
    SIUnitsT<XorOutput<R0, R1>, XorOutput<E0, E1>>: Default,
{
    type Output = SIUnitsT<XorOutput<R0, R1>, XorOutput<E0, E1>>;

    fn xor(self, _other: SIUnitsT<R1, E1>) -> Self::Output {
        Default::default()
    }
}

impl<L, M, T, E> ReduceWith<E> for SIRatiosT<L, M, T>
where
    L: Ratio + ReduceWith<E::Length>,
    M: Ratio + ReduceWith<E::Mass>,
    T: Ratio + ReduceWith<E::Time>,
    E: SIExponents,
    ReduceWithOutput<L, E::Length>: Ratio + Default,
    ReduceWithOutput<M, E::Mass>: Ratio + Default,
    ReduceWithOutput<T, E::Time>: Ratio + Default,
{
    type Output = SIRatiosT<
        ReduceWithOutput<L, E::Length>,
        ReduceWithOutput<M, E::Mass>,
        ReduceWithOutput<T, E::Time>,
    >;

    fn reduce_with(self, _other: E) -> Self::Output {
        Default::default()
    }
}

impl<R, E> Reduce for SIUnitsT<R, E>
where
    R: SIRatios + ReduceWith<E>,
    E: SIExponents,
    ReduceWithOutput<R, E>: SIRatios,
    SIUnitsT<ReduceWithOutput<R, E>, E>: Default,
{
    type Output = SIUnitsT<ReduceWithOutput<R, E>, E>;

    fn reduce(self) -> Self::Output {
        Default::default()
    }
}

impl<T, R, E> std::ops::Mul<SIUnitsT<R, E>> for AmountT<T>
where
    T: Amount,
    AmountT<T>: std::ops::Mul<RatioExponentT<R::Length, E::Length>, Output = Self>
        + std::ops::Mul<RatioExponentT<R::Mass, E::Mass>, Output = Self>
        + std::ops::Mul<RatioExponentT<R::Time, E::Time>, Output = Self>,
    R: SIRatios,
    E: SIExponents,
{
    type Output = Self;

    fn mul(self, _other: SIUnitsT<R, E>) -> Self::Output {
        let mut result = self;
        result = result
            * RatioExponentT::<R::Length, E::Length> {
                _r: PhantomData,
                _e: PhantomData,
            };
        result = result
            * RatioExponentT::<R::Mass, E::Mass> {
                _r: PhantomData,
                _e: PhantomData,
            };
        result = result
            * RatioExponentT::<R::Time, E::Time> {
                _r: PhantomData,
                _e: PhantomData,
            };

        result
    }
}

impl<T, R, E> std::ops::Div<SIUnitsT<R, E>> for AmountT<T>
where
    T: Amount,
    AmountT<T>: std::ops::Div<RatioExponentT<R::Length, E::Length>, Output = Self>
        + std::ops::Div<RatioExponentT<R::Mass, E::Mass>, Output = Self>
        + std::ops::Div<RatioExponentT<R::Time, E::Time>, Output = Self>,
    R: SIRatios,
    E: SIExponents,
{
    type Output = Self;

    fn div(self, _other: SIUnitsT<R, E>) -> Self::Output {
        let mut result = self;
        result = result
            / RatioExponentT::<R::Length, E::Length> {
                _r: PhantomData,
                _e: PhantomData,
            };
        result = result
            / RatioExponentT::<R::Mass, E::Mass> {
                _r: PhantomData,
                _e: PhantomData,
            };
        result = result
            / RatioExponentT::<R::Time, E::Time> {
                _r: PhantomData,
                _e: PhantomData,
            };

        result
    }
}

impl<T, R1, R2, E> ConvertUnits<QuantityT<T, SIUnitsT<R1, E>>> for QuantityT<T, SIUnitsT<R2, E>>
where
    T: Amount,
    AmountT<T>: std::ops::Mul<SIUnitsT<R1, E>, Output = AmountT<T>>
        + std::ops::Div<SIUnitsT<R1, E>, Output = AmountT<T>>
        + std::ops::Mul<SIUnitsT<R2, E>, Output = AmountT<T>>
        + std::ops::Div<SIUnitsT<R2, E>, Output = AmountT<T>>,
    R1: SIRatios,
    R2: SIRatios,
    E: SIExponents,
{
    fn convert_from(other: QuantityT<T, SIUnitsT<R1, E>>) -> Self {
        let amount = AmountT(other.amount());
        let r1: SIUnitsT<R1, E> = SIUnitsT {
            _r: PhantomData,
            _e: PhantomData,
        };
        let r2: SIUnitsT<R2, E> = SIUnitsT {
            _r: PhantomData,
            _e: PhantomData,
        };

        let result = amount / r2 * r1;
        Self::new(result.0)
    }

    fn convert_into(self) -> QuantityT<T, SIUnitsT<R1, E>> {
        QuantityT::<T, SIUnitsT<R1, E>>::convert_from(self)
    }
}

impl<T1, T2, U> CastAmount<QuantityT<T2, U>> for QuantityT<T1, U>
where
    T1: Amount + num_traits::NumCast,
    T2: Amount + num_traits::NumCast,
{
    fn cast_from(other: QuantityT<T2, U>) -> Self {
        Self::new(num_traits::cast(other.amount()).unwrap())
    }

    fn cast_into(self) -> QuantityT<T2, U> {
        QuantityT::<T2, U>::new(num_traits::cast(self.amount()).unwrap())
    }
}

impl<R, E> std::fmt::Display for SIUnitsT<R, E>
where
    R: SIRatios,
    E: SIExponents,
{
    fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result {
        let mut any = false;

        // Length
        let e = E::Length::to_i64();
        if e != 0 {
            assert!(R::Length::numerator() != 0 && R::Length::denominator() != 0);
            any = true;
            write_ratio_symbol_short::<R::Length>(f)?;
            write!(f, "m")?;
            if e != 1 {
                write_superscript(e, f)?;
            }
        };

        // Mass
        let e = E::Mass::to_i64();
        if e != 0 {
            assert!(R::Mass::numerator() != 0 && R::Mass::denominator() != 0);
            if any {
                write!(f, "·")?;
            }

            any = true;
            write_ratio_symbol_short::<R::Mass>(f)?;
            write!(f, "g")?;
            if e != 1 {
                write_superscript(e, f)?;
            }
        };

        // Time
        let e = E::Time::to_i64();
        if e != 0 {
            assert!(R::Time::numerator() != 0 && R::Time::denominator() != 0);
            if any {
                write!(f, "·")?;
            }

            write_ratio_symbol_time_short::<R::Time>(f)?;
            if e != 1 {
                write_superscript(e, f)?;
            }
        };

        Ok(())
    }
}

fn write_superscript(num: i64, f: &mut fmt::Formatter) -> fmt::Result {
    const NEG: &char = &'⁻';
    const DIGITS: &[char; 10] = &[
        '⁰', '¹', '²', '³', '⁴', '⁵', '⁶', '⁷', '⁸', '⁹',
    ];

    let mut digits: [u8; 48] = [0; 48];
    let mut num_digits = 0;
    let mut num = num;

    if num < 0 {
        write!(f, "{}", NEG)?;
        num = num.abs();
    }

    while num != 0 {
        let digit = num % 10;
        num /= 10;
        digits[num_digits] = digit as u8;
        num_digits += 1;
    }

    let slice = &digits[0..num_digits];

    for digit in slice.iter().rev() {
        let idx = *digit as usize;
        write!(f, "{}", DIGITS[idx])?;
    }

    Ok(())
}

fn write_ratio_symbol_short<R: Ratio>(f: &mut fmt::Formatter) -> fmt::Result {
    let n = R::numerator();
    let d = R::denominator();

    // Print Ratio; Kilo, centi, (18/7), etc
    match (n, d) {
        (1_000_000_000_000_000, 1) => write!(f, "P"),
        (1_000_000_000_000, 1) => write!(f, "T"),
        (1_000_000_000, 1) => write!(f, "G"),
        (1_000_000, 1) => write!(f, "M"),
        (1_000, 1) => write!(f, "k"),
        (100, 1) => write!(f, "h"),
        (10, 1) => write!(f, "da"),
        (1, 1) => Ok(()),
        (1, 10) => write!(f, "d"),
        (1, 100) => write!(f, "c"),
        (1, 1_000) => write!(f, "m"),
        (1, 1_000_000) => write!(f, "μ"),
        (1, 1_000_000_000) => write!(f, "n"),
        (1, 1_000_000_000_000) => write!(f, "p"),
        (1, 1_000_000_000_000_000) => write!(f, "f"),
        (_, _) => write!(f, "({}/{})", n, d),
    }
}

fn write_ratio_symbol_time_short<R: Ratio>(f: &mut fmt::Formatter) -> fmt::Result {
    let n = R::numerator();
    let d = R::denominator();

    // Print Ratio; Kilo, centi, (18/7), etc
    match (n, d) {
        (3_600, 1) => write!(f, "h"),
        (60, 1) => write!(f, "m"),
        (1, 1) => write!(f, "s"),
        (1, 10) => write!(f, "ds"),
        (1, 100) => write!(f, "cs"),
        (1, 1_000) => write!(f, "ms"),
        (1, 1_000_000) => write!(f, "μs"),
        (1, 1_000_000_000) => write!(f, "ns"),
        (1, 1_000_000_000_000) => write!(f, "ps"),
        (1, 1_000_000_000_000_000) => write!(f, "fs"),
        (_, _) => write!(f, "({}/{})", n, d),
    }
}

impl<R, E> Sqrt for SIUnitsT<R, E>
where
    R: SIRatios,
    E: SIExponents,
    E::Length: PartialDiv<P2>,
    E::Mass: PartialDiv<P2>,
    E::Time: PartialDiv<P2>,
    <E::Length as PartialDiv<P2>>::Output: Integer,
    <E::Mass as PartialDiv<P2>>::Output: Integer,
    <E::Time as PartialDiv<P2>>::Output: Integer,
    SIUnitsT<
        R,
        SIExponentsT<
            <E::Length as PartialDiv<P2>>::Output,
            <E::Mass as PartialDiv<P2>>::Output,
            <E::Time as PartialDiv<P2>>::Output,
        >,
    >: Default,
{
    type Output = SIUnitsT<
        R,
        SIExponentsT<
            <E::Length as PartialDiv<P2>>::Output,
            <E::Mass as PartialDiv<P2>>::Output,
            <E::Time as PartialDiv<P2>>::Output,
        >,
    >;

    fn sqrt(self) -> Self::Output {
        Default::default()
    }
}

impl<T, R, U> std::ops::Mul<RatioExponentT<R, typenum::PInt<U>>> for AmountT<T>
where
    T: Amount + std::ops::Mul<T> + num_traits::NumCast,
    R: Ratio,
    U: typenum::Unsigned + NonZero,
    MulOutput<T, T>: std::ops::Div<T, Output = T>,
{
    type Output = AmountT<T>;

    fn mul(self, _other: RatioExponentT<R, typenum::PInt<U>>) -> Self::Output {
        let amount = self.0;
        let n: T = num_traits::cast(R::numerator()).unwrap();
        let d: T = num_traits::cast(R::denominator()).unwrap();

        let result = amount * n / d;
        AmountT(result)
    }
}

impl<T, R, U> std::ops::Div<RatioExponentT<R, typenum::PInt<U>>> for AmountT<T>
where
    T: Amount + std::ops::Mul<T> + num_traits::NumCast,
    R: Ratio,
    U: typenum::Unsigned + NonZero,
    MulOutput<T, T>: std::ops::Div<T, Output = T>,
{
    type Output = AmountT<T>;

    fn div(self, _other: RatioExponentT<R, typenum::PInt<U>>) -> Self::Output {
        let amount = self.0;
        let n: T = num_traits::cast(R::numerator()).unwrap();
        let d: T = num_traits::cast(R::denominator()).unwrap();

        let result = amount * d / n;
        AmountT(result)
    }
}

impl<T, R, U> std::ops::Mul<RatioExponentT<R, typenum::NInt<U>>> for AmountT<T>
where
    T: Amount + std::ops::Mul<T> + num_traits::NumCast,
    R: Ratio,
    U: typenum::Unsigned + NonZero,
    MulOutput<T, T>: std::ops::Div<T, Output = T>,
{
    type Output = AmountT<T>;

    fn mul(self, _other: RatioExponentT<R, typenum::NInt<U>>) -> Self::Output {
        let amount = self.0;
        let n: T = num_traits::cast(R::numerator()).unwrap();
        let d: T = num_traits::cast(R::denominator()).unwrap();

        let result = amount * d / n;
        AmountT(result)
    }
}

impl<T, R, U> std::ops::Div<RatioExponentT<R, typenum::NInt<U>>> for AmountT<T>
where
    T: Amount + std::ops::Mul<T> + num_traits::NumCast,
    R: Ratio,
    U: typenum::Unsigned + NonZero,
    MulOutput<T, T>: std::ops::Div<T, Output = T>,
{
    type Output = AmountT<T>;

    fn div(self, _other: RatioExponentT<R, typenum::NInt<U>>) -> Self::Output {
        let amount = self.0;
        let n: T = num_traits::cast(R::numerator()).unwrap();
        let d: T = num_traits::cast(R::denominator()).unwrap();

        let result = amount * n / d;
        AmountT(result)
    }
}

impl<T> std::ops::Mul<RatioExponentT<RatioZero, typenum::Z0>> for AmountT<T>
where
    T: Amount,
{
    type Output = AmountT<T>;

    fn mul(self, _other: RatioExponentT<RatioZero, typenum::Z0>) -> AmountT<T> {
        self
    }
}

impl<T> std::ops::Div<RatioExponentT<RatioZero, typenum::Z0>> for AmountT<T>
where
    T: Amount,
{
    type Output = AmountT<T>;

    fn div(self, _other: RatioExponentT<RatioZero, typenum::Z0>) -> AmountT<T> {
        self
    }
}

/// Convenient `RatioT` types — Mega, Kilo, Centi, Nano, etc.
pub mod ratios {
    use super::*;
    use typenum::Exp;

    // Limited to 10^15 with i64.
    // Can cover "full" 10^24 spectrum with i128 support

    // Missing: Yotta
    // Missing: Zetta
    // Missing: Exa
    pub type Peta = RatioT<Exp<P10, P15>, P1>;
    pub type Tera = RatioT<Exp<P10, P12>, P1>;
    pub type Giga = RatioT<Exp<P10, P9>, P1>;
    pub type Mega = RatioT<Exp<P10, P6>, P1>;
    pub type Kilo = RatioT<Exp<P10, P3>, P1>;
    pub type Hecto = RatioT<Exp<P10, P2>, P1>;
    pub type Deca = RatioT<Exp<P10, P1>, P1>;
    pub type Zero = RatioZero;
    pub type Unit = RatioT<P1, P1>;
    pub type Deci = RatioT<P1, Exp<P10, P1>>;
    pub type Centi = RatioT<P1, Exp<P10, P2>>;
    pub type Milli = RatioT<P1, Exp<P10, P3>>;
    pub type Micro = RatioT<P1, Exp<P10, P6>>;
    pub type Nano = RatioT<P1, Exp<P10, P9>>;
    pub type Pico = RatioT<P1, Exp<P10, P12>>;
    pub type Femto = RatioT<P1, Exp<P10, P15>>;
    // Missing: Atto
    // Missing: Zepto
    // Missing: Yocto

    // Time
    pub type Second = Unit;
    pub type Minute = RatioT<P60, P1>;
    pub type Hour = RatioT<P3600, P1>;
    pub type Day = RatioT<P86400, P1>;
    pub type Year = RatioT<P31536000, P1>;

    // BaseTypes
    pub type Length<R> = SIRatiosT<R, Zero, Zero>;
    pub type Mass<R> = SIRatiosT<Zero, R, Zero>;
    pub type Time<R> = SIRatiosT<Zero, Zero, R>;
}

/// Convenient `SIExponentsT` types — Length, Mass, etc.
pub mod exponents {
    use super::*;

    // Base types
    pub type Length = SIExponentsT<P1, Z0, Z0>;
    pub type Mass = SIExponentsT<Z0, P1, Z0>;
    pub type Time = SIExponentsT<Z0, Z0, P1>;
}

/// Convenient `SIUnitsT` types — `Length<R>`, `Mass<R>`, etc.
pub mod units {
    use super::*;

    pub type Dimensionless = SIUnitsT<SIRatiosT<Zero, Zero, Zero>, SIExponentsT<Z0, Z0, Z0>>;

    pub type Length<R> = SIUnitsT<ratios::Length<R>, exponents::Length>;
    pub type Mass<R> = SIUnitsT<ratios::Mass<R>, exponents::Mass>;
    pub type Time<R> = SIUnitsT<ratios::Time<R>, exponents::Time>;
}

/// Convenient `QuantityT` types — `Length<T,R>`, `Velocity<T,RL,RT>`, etc.
pub mod quantities {
    use super::*;

    // Base
    pub type Dimensionless<T> =
        QuantityT<T, SIUnitsT<SIRatiosT<Zero, Zero, Zero>, SIExponentsT<Z0, Z0, Z0>>>;
    pub type Length<T, R> = QuantityT<T, units::Length<R>>;
    pub type Mass<T, R> = QuantityT<T, units::Mass<R>>;
    pub type Time<T, R> = QuantityT<T, units::Time<R>>;

    // Derived
    pub type Area<T, R> =
        QuantityT<T, SIUnitsT<SIRatiosT<R, Zero, Zero>, SIExponentsT<P2, Z0, Z0>>>;
    pub type Velocity<T, RL, RT> =
        QuantityT<T, SIUnitsT<SIRatiosT<RL, Zero, RT>, SIExponentsT<P1, Z0, N1>>>;
    pub type Acceleration<T, RL, RT> =
        QuantityT<T, SIUnitsT<SIRatiosT<RL, Zero, RT>, SIExponentsT<P1, Z0, N2>>>;

    // Lengths
    pub type Petameters<T> = Length<T, Peta>;
    pub type Terameters<T> = Length<T, Tera>;
    pub type Gigameters<T> = Length<T, Giga>;
    pub type Megameters<T> = Length<T, Mega>;
    pub type Kilometers<T> = Length<T, Kilo>;
    pub type Hectometers<T> = Length<T, Hecto>;
    pub type Decameters<T> = Length<T, Deca>;
    pub type Zerometers<T> = Length<T, Zero>;
    pub type Meters<T> = Length<T, Unit>;
    pub type Decimeters<T> = Length<T, Deci>;
    pub type Centimeters<T> = Length<T, Centi>;
    pub type Millimeters<T> = Length<T, Milli>;
    pub type Micrometers<T> = Length<T, Micro>;
    pub type Nanometers<T> = Length<T, Nano>;
    pub type Picometers<T> = Length<T, Pico>;
    pub type Femtometers<T> = Length<T, Femto>;

    // Masses
    pub type Petagrams<T> = Mass<T, Peta>;
    pub type Teragrams<T> = Mass<T, Tera>;
    pub type Gigagrams<T> = Mass<T, Giga>;
    pub type Megagrams<T> = Mass<T, Mega>;
    pub type Kilograms<T> = Mass<T, Kilo>;
    pub type Hectograms<T> = Mass<T, Hecto>;
    pub type Decagrams<T> = Mass<T, Deca>;
    pub type Zerograms<T> = Mass<T, Zero>;
    pub type Grams<T> = Mass<T, Unit>;
    pub type Decigrams<T> = Mass<T, Deci>;
    pub type Centigrams<T> = Mass<T, Centi>;
    pub type Milligrams<T> = Mass<T, Milli>;
    pub type Micrograms<T> = Mass<T, Micro>;
    pub type Nanograms<T> = Mass<T, Nano>;
    pub type Picograms<T> = Mass<T, Pico>;
    pub type Femtograms<T> = Mass<T, Femto>;

    // Times
    pub type Years<T> = Time<T, Year>;
    pub type Days<T> = Time<T, Day>;
    pub type Hours<T> = Time<T, Hour>;
    pub type Minutes<T> = Time<T, Minute>;
    pub type Seconds<T> = Time<T, Unit>;
    pub type Milliseconds<T> = Time<T, Milli>;
    pub type Microseconds<T> = Time<T, Micro>;
    pub type Nanoseconds<T> = Time<T, Nano>;
    pub type Picoseconds<T> = Time<T, Pico>;
    pub type Femtoseconds<T> = Time<T, Femto>;

    // Derived Units
    pub type MetersPerSecond<T> = Velocity<T, Unit, Unit>;
    pub type MetersPerSecond2<T> = Acceleration<T, Unit, Unit>;
    pub type KilometersPerHour<T> = Velocity<T, Kilo, Hour>;

    /// Convenient `QuantityT<f32, SIUnitsT<_,_>>` types — Meters, Kilograms, MetersPerSecond, etc.
    pub mod f32 {
        use super::*;

        pub type Dimensionless =
            QuantityT<f32, SIUnitsT<SIRatiosT<Zero, Zero, Zero>, SIExponentsT<Z0, Z0, Z0>>>;

        pub type Length<R> = QuantityT<f32, units::Length<R>>;
        pub type Mass<R> = QuantityT<f32, units::Mass<R>>;
        pub type Time<R> = QuantityT<f32, units::Time<R>>;

        pub type Petameters = Length<Peta>;
        pub type Terameters = Length<Tera>;
        pub type Gigameters = Length<Giga>;
        pub type Megameters = Length<Mega>;
        pub type Kilometers = Length<Kilo>;
        pub type Hectometers = Length<Hecto>;
        pub type Decameters = Length<Deca>;
        pub type Zerometers = Length<Zero>;
        pub type Meters = Length<Unit>;
        pub type Decimeters = Length<Deci>;
        pub type Centimeters = Length<Centi>;
        pub type Millimeters = Length<Milli>;
        pub type Micrometers = Length<Micro>;
        pub type Nanometers = Length<Nano>;
        pub type Picometers = Length<Pico>;
        pub type Femtometers = Length<Femto>;

        pub type Kilograms = Mass<Kilo>;
        pub type Grams = Mass<Unit>;

        pub type Years = Time<Year>;
        pub type Days = Time<Day>;
        pub type Hours = Time<Hour>;
        pub type Minutes = Time<Minute>;
        pub type Seconds = Time<Unit>;
        pub type Milliseconds = Time<Milli>;
        pub type Microseconds = Time<Micro>;
        pub type Nanoseconds = Time<Nano>;
        pub type Picoseconds = Time<Pico>;
        pub type Femtoseconds = Time<Femto>;

        pub type MetersPerSecond = super::MetersPerSecond<f32>;
        pub type MetersPerSecond2 = super::MetersPerSecond2<f32>;
        pub type KilometersPerHour = super::KilometersPerHour<f32>;
    }

    /// Dimensional traits for `impl Trait` use — `trait Length`, `trait Velocity`, etc.
    pub mod traits {
        use crate::quantity::{Amount, ConvertUnits, Quantity};
        use crate::ratio::Ratio;

        // --------------------------------
        // Trait Declarations
        // --------------------------------
        pub trait Length: Quantity + Copy {
            fn convert<R>(self) -> super::Length<Self::AmountType, R>
            where
                R: Ratio,
                Self::AmountType: Amount;
        }

        pub trait Time: Quantity + Copy {
            fn convert<R>(self) -> super::Time<Self::AmountType, R>
            where
                R: Ratio,
                Self::AmountType: Amount;
        }

        pub trait Area: Quantity {
            fn convert<R>(self) -> super::Area<Self::AmountType, R>
            where
                R: Ratio,
                Self::AmountType: Amount;
        }

        pub trait Velocity: Quantity {
            fn convert<RL, RT>(self) -> super::Velocity<Self::AmountType, RL, RT>
            where
                RL: Ratio,
                RT: Ratio,
                Self::AmountType: Amount;
        }

        pub trait Acceleration: Quantity {
            fn convert<RL, RT>(self) -> super::Acceleration<Self::AmountType, RL, RT>
            where
                RL: Ratio,
                RT: Ratio,
                Self::AmountType: Amount;
        }

        // --------------------------------
        // Trait Impls
        // --------------------------------
        impl<T, R> Length for super::Length<T, R>
        where
            T: Amount
                + num_traits::NumCast
                + std::ops::Mul<T, Output = T>
                + std::ops::Div<T, Output = T>,
            R: Ratio + Copy,
        {
            fn convert<R2>(self) -> super::Length<Self::AmountType, R2>
            where
                R2: Ratio,
                Self: super::ConvertUnits<super::Length<Self::AmountType, R2>>,
            {
                self.convert_into()
            }
        }

        impl<T, R> Time for super::Time<T, R>
        where
            T: Amount
                + num_traits::NumCast
                + std::ops::Mul<T, Output = T>
                + std::ops::Div<T, Output = T>,
            R: Ratio + Copy,
        {
            fn convert<R2>(self) -> super::Time<Self::AmountType, R2>
            where
                R2: Ratio,
                Self: super::ConvertUnits<super::Time<Self::AmountType, R2>>,
            {
                self.convert_into()
            }
        }

        impl<T, R> Area for super::Area<T, R>
        where
            T: Amount
                + num_traits::NumCast
                + std::ops::Mul<T, Output = T>
                + std::ops::Div<T, Output = T>,
            R: Ratio + Copy,
        {
            fn convert<R2>(self) -> super::Area<Self::AmountType, R2>
            where
                R2: Ratio,
                Self: super::ConvertUnits<super::Area<Self::AmountType, R2>>,
            {
                self.convert_into()
            }
        }

        impl<T, RL, RT> Velocity for super::Velocity<T, RL, RT>
        where
            T: Amount
                + num_traits::NumCast
                + std::ops::Mul<T, Output = T>
                + std::ops::Div<T, Output = T>,
            RL: Ratio + Copy,
            RT: Ratio + Copy,
        {
            fn convert<RL2, RT2>(self) -> super::Velocity<Self::AmountType, RL2, RT2>
            where
                RL2: Ratio,
                RT2: Ratio,
                Self: super::ConvertUnits<super::Velocity<Self::AmountType, RL2, RT2>>,
            {
                self.convert_into()
            }
        }

        impl<T, RL, RT> Acceleration for super::Acceleration<T, RL, RT>
        where
            T: Amount
                + num_traits::NumCast
                + std::ops::Mul<T, Output = T>
                + std::ops::Div<T, Output = T>,
            RL: Ratio + Copy,
            RT: Ratio + Copy,
        {
            fn convert<RL2, RT2>(self) -> super::Acceleration<Self::AmountType, RL2, RT2>
            where
                RL2: Ratio,
                RT2: Ratio,
                Self: super::ConvertUnits<super::Acceleration<Self::AmountType, RL2, RT2>>,
            {
                self.convert_into()
            }
        }
    }
}