fudanchii fudanchii

Installing OpenBSD 7.3-current on a VisionFive2

Here are some concise instructions for getting OpenBSD 7.3-current running on a StarFive VisionFive 2 (v1.3B, though from other reports referenced below, it sounds like the v1.2 boards can also be made to work).

You will need:

An SD card of at least 1GB
An eMMC module attached to the board (though see below for a variation that should work to install directly to sd card)
Internet access
A USB TTL serial adapter that supports 3.3V (some of these support multiple voltages, but if yours only supports other voltages and not 3.3 it will either not work or damage your board!)

Purpose

Bootstrap knowledge of LLMs ASAP. With a bias/focus to GPT.

Avoid being a link dump. Try to provide only valuable well tuned information.

Prelude

Neural network links before starting with transformers.

A small sampling of external projects initially built for Ember use but designed to be used standalone:

Handlebars - templating engine
simple-html-tokenizer - an HTML5 tokenizer
HTMLBars - alternate HTML-aware Handlebars backend
morph - text-node placeholders for data binding systems
RSVP - fast, lightweight promise library
route-recognizer - just the recognition part of a router
router.js - hierarchical states and transition-based router
dag-map - graph library

Channels Are Not Enough

... or Why Pipelining Is Not That Easy

Golang Concurrency Patterns for brave and smart.

By @kachayev

Intro

The introduction to Reactive Programming you've been missing

(by @andrestaltz)

This tutorial as a series of videos

If you prefer to watch video tutorials with live-coding, then check out this series I recorded with the same contents as in this article: Egghead.io - Introduction to Reactive Programming.

	# This code is licensed under the terms of the MIT license https://opensource.org/license/mit
	# Copyright (c) 2021 Marat Reymers

	## Golden config for golangci-lint v1.62.0
	#
	# This is the best config for golangci-lint based on my experience and opinion.
	# It is very strict, but not extremely strict.
	# Feel free to adapt and change it for your needs.

	run:


	declare -ar _status=(
	[ 0]=😀 # Success
	[ 1]=🤨 # Error
	[129]=📞 # SIGHUP
	[130]=🛑 # SIGINT
	[131]="(╯°□°）╯︵ ┻━┻" # SIGQUIT
	[132]=👮 # SIGILL
	[133]=🐍 # SIGTRAP
	[134]=💥 # SIGABRT

	require "active_support"
	require "active_support/core_ext/string/output_safety"
	require "objspace"

	def assert_same_object(x, y)
	raise unless x.object_id == y.object_id
	end

	def assert_not_same_object(x, y)
	raise unless x.object_id != y.object_id

	/**
	* USB HID Keyboard scan codes as per USB spec 1.11
	* plus some additional codes
	*
	* Created by MightyPork, 2016
	* Public domain
	*
	* Adapted from:
	* https://source.android.com/devices/input/keyboard-devices.html
	*/

	/* bling.js */

	window.$ = document.querySelectorAll.bind(document);

	Node.prototype.on = window.on = function (name, fn) {
	this.addEventListener(name, fn);
	};

	NodeList.prototype.__proto__ = Array.prototype;