fujin 0.45mm layer 0.6mm nozzle Slic3rPE / Klipper profiles (eSun PETG, Sainsmart TPU)

fujin_petg_bigboy.ini

# generated by Slic3r Prusa Edition 1.41.2+win64 on 2019-01-09 at 16:23:04
avoid_crossing_perimeters = 0
bed_shape = 0x0,250x0,250x210,0x210
bed_temperature = 80
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n\n\n\n\n
between_objects_gcode = 
bottom_solid_layers = 4
bridge_acceleration = 1500
bridge_angle = 0
bridge_fan_speed = 70
bridge_flow_ratio = 0.85
bridge_speed = 33
brim_width = 0
clip_multipart_objects = 1
compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/";
complete_objects = 0
cooling = 1
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_acceleration = 1000
default_filament_profile = "Prusa PLA"
default_print_profile = 0.15mm OPTIMAL MK3
deretract_speed = 0
disable_fan_first_layers = 3
dont_support_bridges = 1
duplicate_distance = 6
elefant_foot_compensation = 0
end_filament_gcode = "; Filament-specific end gcode"
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 F1000.0 ; set feed rate\nG1 E-3 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X20 Y200; home X axis\n\nM84 ; disable motors\n
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.85
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_loading_move = -2
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_colour = #00FFFF
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 0.92
extrusion_width = 1.02
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #00F700
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 44.99
filament_density = 1.23
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 15
filament_minimal_purge_on_wipe_tower = 5
filament_notes = "List of materials tested with standard PLA print settings for MK3:\n\n\neSun PETG\n3DXTech PETG\n"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_settings_id = "eSun PET-G (0.6 nozzle)"
filament_soluble = 0
filament_toolchange_delay = 0
filament_type = PET
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
fill_angle = 45
fill_density = 10%
fill_pattern = gyroid
first_layer_acceleration = 1000
first_layer_bed_temperature = 75
first_layer_extrusion_width = 1.02
first_layer_height = 0.2
first_layer_speed = 15
first_layer_temperature = 250
gap_fill_speed = 40
gcode_comments = 0
gcode_flavor = marlin
host_type = octoprint
infill_acceleration = 1000
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.85
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0.3
infill_speed = 33
inherits_cummulative = "0.20mm FAST MK3";"ColorFabb Brass Bronze";"Original Prusa i3 MK3"
interface_shells = 0
layer_gcode = ;AFTER_LAYER_CHANGE
layer_height = 0.45
machine_max_acceleration_e = 180,180
machine_max_acceleration_extruding = 1500,1500
machine_max_acceleration_retracting = 1200,1200
machine_max_acceleration_x = 4000,4000
machine_max_acceleration_y = 4000,4000
machine_max_acceleration_z = 300,300
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 500,500
machine_max_feedrate_y = 500,500
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 0.33,0.33
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_fan_speed = 60
max_layer_height = 0
max_print_height = 210
max_print_speed = 36
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 15
min_fan_speed = 50
min_layer_height = 0
min_print_speed = 20
min_skirt_length = 4
notes = 
nozzle_diameter = 0.6
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = MK3 PETG_[input_filename_base].gcode
overhangs = 1
parking_pos_retraction = 92
perimeter_acceleration = 600
perimeter_extruder = 1
perimeter_extrusion_width = 0.85
perimeter_speed = 33
perimeters = 2
post_process = 
print_host = 192.168.1.3
print_settings_id = 0.45mm SLOW 0.6 nozzle MK3
printer_model = MK3
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
printer_settings_id = PETG 0.6 nozzle PA
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 7D0CF29E4AFD4194A009776590109546
printhost_cafile = 
raft_layers = 0
remaining_times = 1
resolution = 0
retract_before_travel = 2
retract_before_wipe = 10%
retract_layer_change = 1
retract_length = 0.6
retract_length_toolchange = 4
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 209
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 15
seam_position = aligned
serial_port = 
serial_speed = 250000
silent_mode = 1
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 1
skirt_distance = 2
skirt_height = 1
skirts = 0
slowdown_below_layer_time = 20
small_perimeter_speed = 25%
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.63
solid_infill_speed = 33
spiral_vase = 0
standby_temperature_delta = -5
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
start_gcode = M220 S100 ; Feed rate (speed) 100%\nM221 S100 ; Flow (extrusion modifier) 100%\n\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; Set extruder temp before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\n; Klipper PINDA Probe warming sequence\nG28 W\nG0 X50 Y50 Z0.15\n{if first_layer_bed_temperature[0] >= 50 }PROBE_WAIT TEMP=40 DIRECTION=heat{endif}\n\n; MBL\nG80\n\n; Absolute coordinates\nG90\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 E8 ; Purge Bubble\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\n\n; Klipper PA\nSET_PRESSURE_ADVANCE ADVANCE=0.120\nSET_PRESSURE_ADVANCE ADVANCE_LOOKAHEAD_TIME=0.010
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.4
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 33
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
temperature = 245
thin_walls = 1
threads = 8
toolchange_gcode = 
top_infill_extrusion_width = 0.63
top_solid_infill_speed = 36
top_solid_layers = 6
travel_speed = 120
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 0
wipe = 1
wipe_into_infill = 0
wipe_into_objects = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
wiping_volumes_extruders = 70,70
wiping_volumes_matrix = 0
xy_size_compensation = 0
z_offset = 0

fujin_tpu_bigboy.ini

# generated by Slic3r Prusa Edition 1.41.2+win64 on 2019-01-09 at 16:23:19
avoid_crossing_perimeters = 1
bed_shape = 0x0,250x0,250x210,0x210
bed_temperature = 60
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n\n\n\n\n
between_objects_gcode = 
bottom_solid_layers = 4
bridge_acceleration = 1500
bridge_angle = 0
bridge_fan_speed = 100
bridge_flow_ratio = 0.85
bridge_speed = 33
brim_width = 0
clip_multipart_objects = 1
compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/";
complete_objects = 0
cooling = 1
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_acceleration = 1000
default_filament_profile = "Prusa PLA"
default_print_profile = 0.15mm OPTIMAL MK3
deretract_speed = 0
disable_fan_first_layers = 1
dont_support_bridges = 1
duplicate_distance = 6
elefant_foot_compensation = 0
end_filament_gcode = "; Filament-specific end gcode"
end_gcode = G4 ; wait\nM221 S100\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 F1000.0 ; set feed rate\nG1 E-3 ; retract\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG1 X20 Y200; home X axis\n\nM84 ; disable motors\n
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.85
external_perimeter_speed = 50%
external_perimeters_first = 1
extra_loading_move = -2
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_colour = #00FFFF
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1.1
extrusion_width = 1.02
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #000000
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 44.99
filament_density = 1.25
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 15
filament_minimal_purge_on_wipe_tower = 5
filament_notes = "Sainsmart TPU Black 1KG"
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_settings_id = "Sainsmart TPU Black (0.6 nozzle)"
filament_soluble = 0
filament_toolchange_delay = 0
filament_type = FLEX
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
fill_angle = 45
fill_density = 10%
fill_pattern = gyroid
first_layer_acceleration = 1000
first_layer_bed_temperature = 60
first_layer_extrusion_width = 1.02
first_layer_height = 0.2
first_layer_speed = 15
first_layer_temperature = 235
gap_fill_speed = 40
gcode_comments = 0
gcode_flavor = marlin
host_type = octoprint
infill_acceleration = 1000
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.85
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0.3
infill_speed = 33
inherits_cummulative = "0.20mm FAST MK3";"ColorFabb Brass Bronze";"Original Prusa i3 MK3"
interface_shells = 0
layer_gcode = ;AFTER_LAYER_CHANGE
layer_height = 0.45
machine_max_acceleration_e = 180,180
machine_max_acceleration_extruding = 1500,1500
machine_max_acceleration_retracting = 1200,1200
machine_max_acceleration_x = 4000,4000
machine_max_acceleration_y = 4000,4000
machine_max_acceleration_z = 300,300
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 500,500
machine_max_feedrate_y = 500,500
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 0.33,0.33
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_fan_speed = 100
max_layer_height = 0
max_print_height = 210
max_print_speed = 36
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 15
min_fan_speed = 100
min_layer_height = 0
min_print_speed = 15
min_skirt_length = 4
notes = 
nozzle_diameter = 0.6
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = MK3 PETG_[input_filename_base].gcode
overhangs = 1
parking_pos_retraction = 92
perimeter_acceleration = 600
perimeter_extruder = 1
perimeter_extrusion_width = 0.85
perimeter_speed = 33
perimeters = 2
post_process = 
print_host = 192.168.1.3
print_settings_id = 0.45mm SLOW 0.6 nozzle MK3 TPU
printer_model = MK3
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
printer_settings_id = TPU 0.6 nozzle PA
printer_variant = 0.4
printer_vendor = 
printhost_apikey = 7D0CF29E4AFD4194A009776590109546
printhost_cafile = 
raft_layers = 0
remaining_times = 1
resolution = 0
retract_before_travel = 2
retract_before_wipe = 10%
retract_layer_change = 1
retract_length = 0.6
retract_length_toolchange = 4
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 209
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 15
seam_position = aligned
serial_port = 
serial_speed = 250000
silent_mode = 1
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 1
skirt_distance = 2
skirt_height = 1
skirts = 0
slowdown_below_layer_time = 20
small_perimeter_speed = 25%
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.63
solid_infill_speed = 33
spiral_vase = 0
standby_temperature_delta = -5
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
start_gcode = M220 S100 ; Feed rate (speed) 100%\nM221 S100 ; Flow (extrusion modifier) 100%\n\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S160 ; Set extruder temp before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\n; Klipper PINDA Probe warming sequence\nG28 W\nG0 X50 Y50 Z0.15\n{if first_layer_bed_temperature[0] >= 50 }PROBE_WAIT TEMP=40 DIRECTION=heat{endif}\n\n; MBL\nG80\n\n; Absolute coordinates\nG90\n\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 E8 ; Purge Bubble\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0\n\n; Klipper PA\nSET_PRESSURE_ADVANCE ADVANCE=0.080\nSET_PRESSURE_ADVANCE ADVANCE_LOOKAHEAD_TIME=0.010
support_material = 0
support_material_angle = 0
support_material_auto = 1
support_material_buildplate_only = 0
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.4
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 33
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
temperature = 230
thin_walls = 0
threads = 8
toolchange_gcode = 
top_infill_extrusion_width = 0.6
top_solid_infill_speed = 36
top_solid_layers = 6
travel_speed = 120
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 0
wipe = 1
wipe_into_infill = 0
wipe_into_objects = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
wiping_volumes_extruders = 70,70
wiping_volumes_matrix = 0
xy_size_compensation = 0
z_offset = 0