vishvananda

#!/bin/bash

if [ "$4" == "" ]; then
    echo "usage: $0 <local_ip> <remote_ip> <new_local_ip> <new_remote_ip>"
    echo "creates an ipsec tunnel between two machines"
    exit 1
fi

SRC="$1"; shift
DST="$1"; shift

wen-long

Ubuntu 12.04 下制作 OpenWRT iptables geoip 数据库文件

1. 去[Xtables-addons][1]下载xtables-addons-x.x.tar.xz，解压并进入
2. 依次执行

./configure
make
make install

klzgrad

朴素VPN：一个纯内核级静态隧道

由于路由管控系统的建立，实时动态黑洞路由已成为最有效的封锁手段，TCP连接重置和DNS污染成为次要手段，利用漏洞的穿墙方法已不再具有普遍意义。对此应对方法是多样化协议的VPN来抵抗识别。这里介绍一种太简单、有时很朴素的“穷人VPN”。

朴素VPN只需要一次内核配置（Linux内核），即可永久稳定运行，不需要任何用户态守护进程。所有流量转换和加密全部由内核完成，原生性能，开销几乎没有。静态配置，避免动态握手和参数协商产生指纹特征导致被识别。并且支持NAT，移动的内网用户可以使用此方法。支持广泛，基于L2TPv3标准，Linux内核3.2+都有支持，其他操作系统原则上也能支持。但有两个局限：需要root权限；一个隧道只支持一个用户。

朴素VPN利用UDP封装的静态L2TP隧道实现VPN，内核XFRM实现静态IPsec。实际上IP-in-IP隧道即可实现VPN，但是这种协议无法穿越NAT，因此必须利用UDP封装。内核3.18将支持Foo-over-UDP，在UDP里面直接封装IP，与静态的L2TP-over-UDP很类似。

创建一个朴素VPN

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

efrecon

docker run \
  --name {{printf "%q" .Name}} \
    {{- with .HostConfig}}
        {{- if .Privileged}}
  --privileged \
        {{- end}}
        {{- if .AutoRemove}}
  --rm \
        {{- end}}
        {{- if .Runtime}}

shankerwangmiao

#!/bin/bash

function load_var {
  eval $(cat ${1} <( echo -e '\nset -o posix;set\n') | env - bash --noprofile --norc --posix  | sed 's/^/'$2'_/')
  if [ -n "$IF_IPSEC6" ]; then
    PEER_ENDPOINT=$PEER_ENDPOINT6
    SELF_ENDPOINT=$SELF_ENDPOINT6
  fi
}

harshavardhana

# Based on a modified script from here: http://tmont.com/blargh/2014/1/uploading-to-s3-in-bash

S3KEY="YOUR-ACCESSKEY"
S3SECRET="YOUR-SECRETKEY"

function putS3
{
  path=$1
  file=$2
  aws_path=$3

hexchain

朴素VPN：一个纯内核级静态隧道

由于路由管控系统的建立，实时动态黑洞路由已成为最有效的封锁手段，TCP连接重置和DNS污染成为次要手段，利用漏洞的穿墙方法已不再具有普遍意义。对此应对方法是多样化协议的VPN来抵抗识别。这里介绍一种太简单、有时很朴素的“穷人VPN”。

朴素VPN只需要一次内核配置（Linux内核），即可永久稳定运行，不需要任何用户态守护进程。所有流量转换和加密全部由内核完成，原生性能，开销几乎没有。静态配置，避免动态握手和参数协商产生指纹特征导致被识别。并且支持NAT，移动的内网用户可以使用此方法。支持广泛，基于L2TPv3标准，Linux内核3.2+都有支持，其他操作系统原则上也能支持。但有两个局限：需要root权限；一个隧道只支持一个用户。

朴素VPN利用UDP封装的静态L2TP隧道实现VPN，内核XFRM实现静态IPsec。实际上IP-in-IP隧道即可实现VPN，但是这种协议无法穿越NAT，因此必须利用UDP封装。内核3.18将支持Foo-over-UDP，在UDP里面直接封装IP，与静态的L2TP-over-UDP很类似。

创建一个朴素VPN

egmontkob

Hyperlinks (a.k.a. HTML-like anchors) in terminal emulators

[ Update 2025-03-24: Commenting is disabled permanently. Previous comments are archived at web.archive.org. ]

---

Most of the terminal emulators auto-detect when a URL appears onscreen and allow to conveniently open them (e.g. via Ctrl+click or Cmd+click, or the right click menu).

It was, however, not possible until now for arbitrary text to point to URLs, just as on webpages.

gboudreau

Exporting your 2FA tokens from Authy to transfer them into another 2FA application

IMPORTANT - Update regarding deprecation of Authy desktop apps

Past August 2024, Authy stopped supported the desktop version of their apps:
See Authy is shutting down its desktop app | The 2FA app Authy will only be available on Android and iOS starting in August for details.

And indeed, after a while, Authy changed something in their backend which now prevents the old desktop app from logging in. If you are already logged in, then you are in luck, and you can follow the instructions below to export your tokens.

If you are not logged in anymore, but can find a backup of the necessary files, then restore those files, and re-install Authy 2.2.3 following the instructions below, and it should work as expected.