Created
May 7, 2011 12:00
-
-
Save gaurish/960443 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $ sudo lspci -vv | |
| 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) | |
| Subsystem: Giga-byte Technology Device 5000 | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Capabilities: [e0] Vendor Specific Information <?> | |
| Kernel driver in use: agpgart-intel | |
| Kernel modules: intel-agp | |
| 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) | |
| Subsystem: Giga-byte Technology Device d000 | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 27 | |
| Region 0: Memory at fdf00000 (32-bit, non-prefetchable) [size=512K] | |
| Region 1: I/O ports at ff00 [size=8] | |
| Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] | |
| Region 3: Memory at fdc00000 (32-bit, non-prefetchable) [size=1M] | |
| Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ | |
| Address: fee0100c Data: 4189 | |
| Capabilities: [d0] Power Management version 2 | |
| Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 PME-Enable- DSel=0 DScale=0 PME- | |
| Kernel driver in use: i915 | |
| Kernel modules: i915 | |
| 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01) | |
| Subsystem: Giga-byte Technology Device a002 | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 4 bytes | |
| Interrupt: pin A routed to IRQ 16 | |
| Region 0: Memory at fdff8000 (64-bit, non-prefetchable) [size=16K] | |
| Capabilities: [50] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- | |
| Address: 0000000000000000 Data: 0000 | |
| Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us | |
| ExtTag- RBE- FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ | |
| MaxPayload 128 bytes, MaxReadReq 128 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- | |
| LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us | |
| ClockPM- Suprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt- | |
| Capabilities: [100] Virtual Channel <?> | |
| Capabilities: [130] Root Complex Link <?> | |
| Kernel driver in use: HDA Intel | |
| Kernel modules: snd-hda-intel | |
| 00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 4 bytes | |
| Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 | |
| I/O behind bridge: 0000c000-0000cfff | |
| Memory behind bridge: fd900000-fd9fffff | |
| Prefetchable memory behind bridge: 00000000fd800000-00000000fd8fffff | |
| Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited | |
| ExtTag- RBE- FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- | |
| MaxPayload 128 bytes, MaxReadReq 128 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- | |
| LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us | |
| ClockPM- Suprise- LLActRep+ BwNot- | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- | |
| SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ | |
| Slot # 10, PowerLimit 10.000000; Interlock- NoCompl- | |
| SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- | |
| Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- | |
| SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- | |
| Changed: MRL- PresDet+ LinkState+ | |
| RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- | |
| RootCap: CRSVisible- | |
| RootSta: PME ReqID 0000, PMEStatus- PMEPending- | |
| Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ | |
| Address: fee0300c Data: 4159 | |
| Capabilities: [90] Subsystem: Giga-byte Technology Device 5001 | |
| Capabilities: [a0] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [100] Virtual Channel <?> | |
| Capabilities: [180] Root Complex Link <?> | |
| Kernel driver in use: pcieport | |
| Kernel modules: shpchp | |
| 00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 4 bytes | |
| Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 | |
| I/O behind bridge: 0000b000-0000bfff | |
| Memory behind bridge: fde00000-fdefffff | |
| Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff | |
| Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited | |
| ExtTag- RBE- FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- | |
| MaxPayload 128 bytes, MaxReadReq 128 bytes | |
| DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- | |
| LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 <4us | |
| ClockPM- Suprise- LLActRep+ BwNot- | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- | |
| SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+ | |
| Slot # 11, PowerLimit 10.000000; Interlock- NoCompl- | |
| SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- | |
| Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- | |
| SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- | |
| Changed: MRL- PresDet+ LinkState+ | |
| RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- | |
| RootCap: CRSVisible- | |
| RootSta: PME ReqID 0000, PMEStatus- PMEPending- | |
| Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+ | |
| Address: fee0300c Data: 4161 | |
| Capabilities: [90] Subsystem: Giga-byte Technology Device 5001 | |
| Capabilities: [a0] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [100] Virtual Channel <?> | |
| Capabilities: [180] Root Complex Link <?> | |
| Kernel driver in use: pcieport | |
| Kernel modules: shpchp | |
| 00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01) | |
| Subsystem: Giga-byte Technology Device 5004 | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 23 | |
| Region 4: I/O ports at fe00 [size=32] | |
| Kernel driver in use: uhci_hcd | |
| 00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) | |
| Subsystem: Giga-byte Technology Device 5004 | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin B routed to IRQ 19 | |
| Region 4: I/O ports at fd00 [size=32] | |
| Kernel driver in use: uhci_hcd | |
| 00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) | |
| Subsystem: Giga-byte Technology Device 5004 | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin C routed to IRQ 18 | |
| Region 4: I/O ports at fc00 [size=32] | |
| Kernel driver in use: uhci_hcd | |
| 00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) | |
| Subsystem: Giga-byte Technology Device 5004 | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin D routed to IRQ 16 | |
| Region 4: I/O ports at fb00 [size=32] | |
| Kernel driver in use: uhci_hcd | |
| 00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20) | |
| Subsystem: Giga-byte Technology Device 5006 | |
| Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 23 | |
| Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=1K] | |
| Capabilities: [50] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) | |
| Status: D0 PME-Enable- DSel=0 DScale=0 PME- | |
| Kernel driver in use: ehci_hcd | |
| 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01) | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 | |
| I/O behind bridge: 0000d000-0000dfff | |
| Memory behind bridge: fdb00000-fdbfffff | |
| Prefetchable memory behind bridge: 00000000fda00000-00000000fdafffff | |
| Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- | |
| BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- | |
| PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- | |
| Capabilities: [50] Subsystem: Giga-byte Technology Device 5000 | |
| 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) | |
| Subsystem: Giga-byte Technology Device 5001 | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Capabilities: [e0] Vendor Specific Information <?> | |
| Kernel modules: iTCO_wdt, intel-rng | |
| 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) | |
| Subsystem: Giga-byte Technology Device b001 | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin A routed to IRQ 18 | |
| Region 0: I/O ports at 01f0 [size=8] | |
| Region 1: I/O ports at 03f4 [size=1] | |
| Region 2: I/O ports at 0170 [size=8] | |
| Region 3: I/O ports at 0374 [size=1] | |
| Region 4: I/O ports at f800 [size=16] | |
| Kernel driver in use: ata_piix | |
| 00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) | |
| Subsystem: Giga-byte Technology Device b002 | |
| Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0 | |
| Interrupt: pin B routed to IRQ 19 | |
| Region 0: I/O ports at f700 [size=8] | |
| Region 1: I/O ports at f600 [size=4] | |
| Region 2: I/O ports at f500 [size=8] | |
| Region 3: I/O ports at f400 [size=4] | |
| Region 4: I/O ports at f300 [size=16] | |
| Capabilities: [70] Power Management version 2 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) | |
| Status: D0 PME-Enable- DSel=0 DScale=0 PME- | |
| Kernel driver in use: ata_piix | |
| 00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) | |
| Subsystem: Giga-byte Technology Device 5001 | |
| Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Interrupt: pin B routed to IRQ 11 | |
| Region 4: I/O ports at 0500 [size=32] | |
| Kernel modules: i2c-i801 | |
| 01:00.0 Network controller: RaLink RT2860 | |
| Subsystem: ASUSTeK Computer Inc. Device 130f | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 4 bytes | |
| Interrupt: pin A routed to IRQ 16 | |
| Region 0: Memory at fd9f0000 (32-bit, non-prefetchable) [size=64K] | |
| Capabilities: [40] Power Management version 3 | |
| Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold-) | |
| Status: D0 PME-Enable- DSel=0 DScale=0 PME+ | |
| Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/5 Enable- | |
| Address: 0000000000000000 Data: 0000 | |
| Capabilities: [70] Express (v1) Endpoint, MSI 00 | |
| DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us | |
| ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- | |
| MaxPayload 128 bytes, MaxReadReq 512 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- | |
| LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us | |
| ClockPM+ Suprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
| Capabilities: [100] Advanced Error Reporting <?> | |
| Kernel driver in use: rt2860 | |
| Kernel modules: rt2860sta | |
| 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) | |
| Subsystem: Giga-byte Technology Device e000 | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 32 bytes | |
| Interrupt: pin A routed to IRQ 26 | |
| Region 0: I/O ports at be00 [size=256] | |
| Region 2: Memory at fddff000 (64-bit, prefetchable) [size=4K] | |
| Region 4: Memory at fdde0000 (64-bit, prefetchable) [size=64K] | |
| [virtual] Expansion ROM at fdd00000 [disabled] [size=64K] | |
| Capabilities: [40] Power Management version 3 | |
| Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+) | |
| Status: D0 PME-Enable- DSel=0 DScale=0 PME- | |
| Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+ | |
| Address: 00000000fee0300c Data: 4181 | |
| Capabilities: [70] Express (v1) Endpoint, MSI 01 | |
| DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <8us | |
| ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- | |
| DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- | |
| RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- | |
| MaxPayload 128 bytes, MaxReadReq 4096 bytes | |
| DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- | |
| LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us | |
| ClockPM+ Suprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
| Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2 | |
| Vector table: BAR=4 offset=00000000 | |
| PBA: BAR=4 offset=00000800 | |
| Capabilities: [d0] Vital Product Data <?> | |
| Capabilities: [100] Advanced Error Reporting <?> | |
| Capabilities: [140] Virtual Channel <?> | |
| Capabilities: [160] Device Serial Number 78-56-34-12-78-56-34-12 | |
| Kernel driver in use: r8169 | |
| Kernel modules: r8169 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment