Setup for an easy to use, simple reverse http tunnels with nginx and ssh. It's that simple there's no authentication at all. The end result, a single ssh command invocation gives you a public url for your web app hosted on your laptop.

README.md

What

A lot of times you are developing a web application on your own laptop or home computer and would like to demo it to the public. Most of those times you are behind a router/firewall and you don't have a public IP address. Instead of configuring routers (often not possible), this solution gives you a public URL that's reverse tunnelled via ssh to your laptop.

Because of the relaxation of the sshd setup, it's best used on a dedicated virtual machine just for this (an Amazon micro instance for example).

Requirements

Server side:

• a server with a public ip (1.2.3.4 in this document)
• a domain name (domain.tld in this document)
• a wildcard dns entry in the domain pointing to the public ip (*.ie.mk. 1800 IN A 1.2.3.4)
• nginx
• sshd

Client side:

• ssh client (even plink would work on Windows)

Nginx config

A wildcard dns should point to this nginx instance. Every www<port>.domain.tld will be proxied to 127.0.0.1:<port>

Where <port> needs to be 4 or 5 digits.

server {
  server_name   "~^www(?<port>\d{4,5})\.domain\.tld$";

  location / {
    proxy_pass        http://127.0.0.1:$port;
    proxy_set_header  X-Real-IP  $remote_addr;
    proxy_set_header  Host $host;
  }
}

SSH configuration

A sshd configuration to allow a user with no password and a forced command, so that the user can't get shell access.

Match User tunnel
  # ChrootDirectory
  ForceCommand /bin/echo do-not-send-commands
  AllowTcpForwarding yes
  PasswordAuthentication yes
  PermitEmptyPasswords yes

PAM needs to be disabled if sshd is to allow login without a password. That's not always possible, is not even smart. Another approach would be a separate instance of sshd, on a different port, just for the tunnel user.

Make a copy of the config file, change/add these settings:

UsePAM no
AllowUsers tunnel
Port 722

And then run sshd -f /etc/ssh/sshd_config_tunnel.

The tunnel user has an empty password field in /etc/shaddow.

tunnel::15726:0:99999:7:::

Client

Just connect with:

ssh -N -T 1.2.3.4 -l tunnel -R 0:localhost:5050 -p 722

ssh will respond with a Allocated port 56889 for remote forward to localhost:5050 message. Then you can use www56889.domain.tld

TODO

Test ChrootDirectory in sshd

reverse-ssh-tunnel.sh

#! /bin/sh

local_port=$1
ssh_server=1.2.3.4
ssh_user=tunnel
ssh_port=722
url_tmpl=http://www\\1.domain.tld/

exec 3>&1
eval ssh -N -T $ssh_server -l $ssh_user -R 0:localhost:$local_port -p $ssh_port 2>&1 1>&3 \
    | sed 's|^Allocated port \([[:digit:]]\+\) for remote forward to|Your url is '$url_tmpl' will be forwarded to|'

This will work well for http based connection But what about TCP connections?

Nginx isn't support TCP reverse proxy over domain name

You can use the "GatewayPorts" feature in sshd to support anything you want. The point of this guide is to use vhost on the standard http and https ports.

Hi, I got problem on https protocol on original node.
server {
server_name "~^www(?\d{4,5}).domain.tld$";

location / {
proxy_pass http://127.0.0.1:$port;
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header Host $host;
}
}
HTTPS must be define on upstream, but upstream doesn't support variable, such as $port
any idea?