Raspberry Pi CPU temperature and throttling test script

pi-cpu-stress.sh

#!/bin/bash
# Raspberry Pi stress CPU temperature measurement script.
#
# Download this script (e.g. with wget) and give it execute permissions (chmod +x).
# Then run it with ./pi-cpu-stress.sh
#
# NOTE: In recent years, I've switched to using s-tui. See:
# https://github.com/amanusk/s-tui?tab=readme-ov-file#options

# Variables.
test_run=1
test_results_file="${HOME}/cpu_temp_$test_run.log"
stress_length="10m"

# Verify stress-ng is installed.
if ! [ -x "$(command -v stress-ng)" ]; then
  printf "Error: stress-ng not installed.\n"
  printf "To install: sudo apt install -y stress-ng\n" >&2
  exit 1
fi

printf "Logging temperature and throttling data to: $test_results_file\n"

# Start logging temperature data in the background.
while /bin/true; do
  line=$(date | tr '\n' '\t')
  line+=$(vcgencmd measure_temp | tr -d "temp=" | tr -d "'C" | tr '\n' '\t')
  line+=$(vcgencmd get_throttled | tr -d "throttled=" | tr '\n' '\t')
  line+=$(vcgencmd measure_clock arm | sed 's/^.*=//')

  echo $line
  echo $line >> $test_results_file
  sleep 5
done &

# Store the logging pid.
PROC_ID=$!

# Stop the logging loop if script is interrupted or when it ends.
trap "kill $PROC_ID" EXIT

# After 5 minutes, run stress.
printf "Waiting 5 minutes for stable idle temperature...\n"
printf "Date                         °C   Status  CPU Clock\n"
sleep 300
printf "Beginning $stress_length stress test...\n"
stress-ng -c 4 --timeout $stress_length

# Keep logging for 5 more minutes.
printf "Waiting 5 minutes to return to idle temperature...\n"
sleep 300

printf "Test complete.\n"

I also wanted to get the current value from the new PoE+ HAT during a run today, so I added the following above the 'throttle status' section:

  # Print the current current (e.g. 536000) and a tab.
  cat /sys/devices/platform/rpi-poe-power-supply@0/power_supply/rpi-poe/current_now | tr '\n' '\t' >> $test_results_file;

This outputs a value in microamps.

Great little script! I'm trying to figure out why HTML5 streaming is disappointing on my Pi4b and I thought maybe throttling was the issue. I ran this and temps never report above 71 so I think I'm good, but I also found this: and I'm unclear on whether your script is logging CPU or GPU temps.... or if we can expect them to be pretty much the same...

If that link is correct, you're logging GPU temps and to also log CPU temp

echo temp=$((cat /sys/class/thermal/thermal_zone0/temp/1000)).0\'C | tr -d "temp=" | tr -d "'C" | tr '\n' '\t' >> $test_results_file;

needs to be added.

@pyro12 - According to the Pi's documentation, measure_temp "Returns the temperature of the SoC as measured by the on-board temperature sensor." — that seems to be the only reading that really matters for throttling (it's the SoC temp). Are you seeing different numbers when checking thermal_zone0?

@geerlingguy - Nope. I ran

#!/bin/bash
while true 
do
vcgencmd measure_temp | tr -d "temp=" | tr -d "'C" | tr '\n' '\t'
echo temp=$((`cat /sys/class/thermal/thermal_zone0/temp`/1000)).0\'C
sleep 10
done

via SSH and tried various uses of stress-ng and glxgears and the biggest difference I saw was 1.4 C. A curiousity, but I don't think relevant...

Thanks for helping me understand!

Weird! I'm surprised there would be that much of a difference. And now I'm wondering if there are multiple temperature sensors in the SoC :)

I am using following script to record temperature :

from  gpiozero import CPUTemperature
from time import sleep, strftime, time

cpu = CPUTemperature()
count=1200      # 20 minutes
with open("/home/pi/temp_log.csv", "a") as  log:
    while True:
        temp = cpu.temperature
         log.write("{0},{1}".format(strftime("%Y-%m-%d %H:%M:%S"), str(temp)))
         sleep(1)
         count -= 1
         if count == 0:
             break

and using sysbench in a loop:

#!/bin/bash
while true; 
do 
     sysbench --test=cpu --cpu-max-prime=20000 --threads=4 run 
     sleep 0.1
done 

and it works fine.

Question: how did you generated the images from the logging data? Is there any nice script for that?

maybe it can be plot by using matplotlib library.

For those like me that absolutely are newbies with Linux and Pi, this is the command to download the latest version of this file from the CLI:

curl -L https://gist.github.com/geerlingguy/91d4736afe9321cbfc1062165188dda4/raw/ -o _filename.extension_

I updated the script today to output the lines to screen before they're written to the file (helps to also see if the Pi locked up since it will stop printing data). lmk if you'd like that to be a flag so it can be disabled (like -q for quiet).