Read an SDS011 Laser PM2.5 Sensor (Nova PM Sensor) with Python

sds011.py

#!/usr/bin/python
# -*- coding: UTF-8 -*-

import serial, time, struct

ser = serial.Serial()
ser.port = "/dev/cu.wchusbserial1410" # Set this to your serial port
ser.baudrate = 9600

ser.open()
ser.flushInput()

byte, lastbyte = "\x00", "\x00"

while True:
    lastbyte = byte
    byte = ser.read(size=1)
    
    # We got a valid packet header
    if lastbyte == "\xAA" and byte == "\xC0":
        sentence = ser.read(size=8) # Read 8 more bytes
        readings = struct.unpack('>hhxxcc',sentence) # Decode the packet - big endian, 2 shorts for pm2.5 and pm10, 2 reserved bytes, checksum, message tail
        
        pm_25 = readings[0]/10.0
        pm_10 = readings[1]/10.0
        # ignoring the checksum and message tail
        
        print "PM 2.5:",pm_25,"μg/m^3  PM 10:",pm_10,"μg/m^3"

it is little endian!!!

http://ecksteinimg.de/Datasheet/SDS011%20laser%20PM2.5%20sensor%20specification-V1.3.pdf

Look at page 7! It starts with the low byte and finishes with the high byte !

So please correct line 22 from ">hhxxcc" to "<hhxxcc"

the sensor doesn't start (the fan doesn't start),can anyone help me?

It is little endian indeed! Thanks for everyone who pointed this out. @geoffwatts could you please fix this in your code? This page is top result in Google so it may confuse a lot of people.