J3 Solar Tracker Turret V1.0 / Visit : https://goo.gl/MtRcYe

_100_J3_Solar_Tracket_Turret_v2.ino

#include <Servo.h> // include Servo library
Servo horizontal; // horizontal servo
int servoh = 90; // stand horizontal servo
Servo vertical; // vertical servo
int servov = 90; // stand vertical servo
// LDR pin connections
// name = analogpin;
int ldrlt = 0; //LDR top left
int ldrrt = 1; //LDR top rigt
int ldrld = 2; //LDR down left
int ldrrd = 3; //ldr down rigt
void setup()
{
  Serial.begin(9600);
  // servo connections
  // name.attach(pin);
  horizontal.attach(9);
  vertical.attach(10);
}
void loop()
{
  int lt = analogRead(ldrlt); // top left
  int rt = analogRead(ldrrt); // top right
  int ld = analogRead(ldrld); // down left
  int rd = analogRead(ldrrd); // down rigt
  int dtime = analogRead(4) / 20; // read potentiometers
  int tol = analogRead(5) / 4;
  int avt = (lt + rt) / 2; // average value top
  int avd = (ld + rd) / 2; // average value down
  int avl = (lt + ld) / 2; // average value left
  int avr = (rt + rd) / 2; // average value right
  int dvert = avt — avd; // check the diffirence of up and down
  int dhoriz = avl — avr;// check the diffirence og left and rigt
  if (-1 * tol > dvert || dvert > tol) // check if the diffirence is in the
    //tolerance else change vertical angle
  {
    if (avt > avd)
    {
      servov = ++servov;
      if (servov > 180)
      {
        servov = 180;
      }
    }
    else if (avt < avd)
    {
      servov = — servov;
      if (servov < 0)
      {
        servov = 0;
      }
    }
    vertical.write(servov);
  }
  if (-1 * tol > dhoriz || dhoriz > tol) // check if the diffirence is in the tolerance else change horizontal angle
  {
    if (avl > avr)
    {
      servoh = — servoh;
      if (servoh < 0)
      {
        servoh = 0;
      }
    }
    else if (avl < avr)
    {
      servoh = ++servoh;
      if (servoh > 180)
      {
        servoh = 180;
      }
    }
    else if (avl = avr)
    {
      // nothing
    }
    horizontal.write(servoh);
  }
  delay(dtime);
}