Commands for managing a tk-start tk915 GPS tracker

tkstar-tk915.adoc

TKSTAR-TK915 SMS Commands

Nota

• <space> means space character

• <phone number> like 00330612345678 (prefer international format)

Table 1. Admin commands

Description	Command	Response	Comment
Change password	password<current password><space><new password>	password ok
Enable admin phone number	admin<password><space><phone number>	admin ok	Up to 5 phone numbers.
Disable admin phone number admin	noadmin<password><space><phone number>	noadmin ok

Table 2. Configuration commands

Description	Command	Response	Comment
Reset hardware	begin<password>	begin ok
Check the device	check<password>	device informations
Timezone setting	timezone<password><space><timezone>	time ok	ex: timezone123456 +2

Table 3. Network commands

Description	Command	Response	Comment
Enable GPRS	gprs<password>	gprs ok
Disable GPRS	nogprs<password>	nogprs ok
Set APN	apn<password><space><APN name>	apn ok
Set APN user	apnuser<password> <APN username>	apnuser ok
Set APN password	apnpassword<password> <APN password>	apnpassword ok

Table 4. Alarm commands

Get position	g<password>#	location informations
Enable shock detection	shock<password>	shock ok
Disable shock detection	noshock<password>	noshock ok
Sleep after 10min	sleep<password><space><time>	sleep time ok
Sleep by shock after 5min	sleep<password><space>shock	sleep shock ok
Disable sleep mode	sleep<password><space>off	sleep off ok
Enable alarm when move	move<password><space><distance in meter>	move ok	ex: move123456 500 (over 500m)
Disable alam when move	nomove<password>	nomove ok
Enable over-speed alarm	speed<password><space>080	speed ok	ex: speed123456 080 (over 80km/h)
Disable over-speed alarm	nospeed<password>	nospeed ok
Enable Auto location	t<time w/ 3 digits><time unit s/m/h><occurs w/ 3 digits>n<password>	location informations	ex: * t030s005n123456 send location every 30s, 5 times. * t001h001n123456 send location every hour, 1 time. * t005m**n123456 send position every 5min *time: from 20sec / cycle between 000 and 255.
Disable Auto location	notn<password>	notn ok

Hi there !

As mentionned before I resolved the problem with the TK-915, however it was a 2G tracker, which gave me problems of data coverage, so I just returned it.

So now I bought a TK905C (4G version with 20000mAh battery). However I struggle at getting it working correctly... I managed to have it working with a SFR sim card (local provider in France). However whenever I put the simbase card in it, it won't find any connection.

What I did :

• apn123456 sl2sfr : set apn for sfr
• adminip123456 my.ip port : set to my server
• upload123456 5 : set upload delay to 5sec for debugging its easier
• gprs123456 : activate gprs

Then I could receive correct data on my server (port 5015 btw, hubauo protocol)

Now what I did after that :

• apn123456 simbase
• check123456 : replied with TK905ZF690CJTS60601#250509,,ID:959XXXX,IP:213.XXXX,5015,apn:simbase,apnusername:,apnpassword:,GPS:12,LTE:31,CENTER:,SOS:,,,
• Remove SFR sim and replace with simbase one

Now the tracker wont find any connection and wont send any data to my server.

The simbase's SIM inside is a SIM that works in another tracker for my bicycle, so it is activated, and supposed to be functionnal.

I know I'm a bit off topic, but maybe this happened once to @wilsonsecurityagency-investigator or might talk to someone in there... Maybe it could help another person later!