Skip to content

Instantly share code, notes, and snippets.

@gojimmypi

gojimmypi/ULX3S_WSL_Toolchain.sh

Last active March 5, 2020 23:53
Show Gist options
  • Save gojimmypi/f96cd86b2b8595b4cf3be4baf493c5a7 to your computer and use it in GitHub Desktop.
Save gojimmypi/f96cd86b2b8595b4cf3be4baf493c5a7 to your computer and use it in GitHub Desktop.
Download ZIP
ULX3S Verilog icestorm prjtrellis nextpnr ecp5 toolchain installer
Raw
ULX3S_WSL_Toolchain.sh
#!/bin/bash
WORKSPACE=~/workspace # put your workspace parent directory here. avoid spaces in path
export ULX3S_COM=/dev/ttyS8 # put your device name here
# This WSL Ubuntu bash script will update the system, fetch all dependencies, and git clone
# all of the libraries for running the @DoctorWkt Blinky for the ecp5 ULX3S Board
# including icestorm, nextpnr (or arachne-pnr), yosys
#
#
# A WSL-specific Makefile will also be fetched. (TODO)
#
# wget (TODO)/raw/Makefile -O Makefile
#
# or if you prefer the older arachne-pnr:
#
# wget (TODO)/raw/Makefile -O Makefile
#
# Works bext with Ubuntu 18.04 or later
#
# if weird errors are detected after editing from something like Visual Studio in Windows, try running
# dos2unix ./ULX3S_WSL_Toolchain.sh
#
#"***************************************************************************************************"
# To fetch and use this file (ignore the version warning):
#
# wget https://gist.githubusercontent.com/gojimmypi/f96cd86b2b8595b4cf3be4baf493c5a7/raw/ULX3S_WSL_Toolchain.sh -O ULX3S_WSL_Toolchain.sh
# chmod +x ./ULX3S_WSL_Toolchain.sh
# ./ULX3S_WSL_Toolchain.sh
#
# To clone this gist (honors version checking)
#
# cd $WORKSPACE
# git clone https://gist.github.com/f96cd86b2b8595b4cf3be4baf493c5a7.git ULX3S_WSL_Toolchain
# cd ULX3S_WSL_Toolchain
#
#"***************************************************************************************************"
STARTING_PATH=$(pwd)
# see https://unix.stackexchange.com/questions/14270/get-exit-status-of-process-thats-piped-to-another/73180#73180
# we don't want tee to capture exit codes
set -o pipefail
# convert entire list of params to single lower case string
params="$(tr [A-Z] [a-z] <<< "$@")"
# echo $params
LOG_SUFFIX=$(date +"%Y%m%d_%H%M%S")
# strip any path from $0 to get just the file name of this script, stripping any CR, LF, Tabs
THIS_FILE_NAME=$(basename $0 .sh | tr --delete '\t\r\n' )
mkdir -p "$WORKSPACE"
mkdir -p "$WORKSPACE/install_logs"
LOG_DIRECTORY="$WORKSPACE/install_logs"
# This section is probably not needed anymore
# #"***************************************************************************************************"
# # PYTHONPATH
# #"***************************************************************************************************"
# THIS_PYTHON_PATH="$WORKSPACE/prjtrellis/database"
#
# # set PYTHONPATH for later use in ~/.bashrc
# if [ "$(cat ~/.bashrc | grep $THIS_PYTHON_PATH)" == "" ]; then
# if [ "$(echo $PYTHONPATH)" == "" ]; then
# # there's apparently no PYTHONPATH already, so no need to append
# echo PYTHONPATH=$THIS_PYTHON_PATH >> ~/.bashrc
# echo "~/.bashrc updated with this line:"
# echo PYTHONPATH=$THIS_PYTHON_PATH
# else
# # there's a PYTHONPATH, so we append this one
# echo PYTHONPATH=$PYTHONPATH:$THIS_PYTHON_PATH >> ~/.bashrc
# echo "~/.bashrc updated with this line:"
# echo PYTHONPATH=$PYTHONPATH:$THIS_PYTHON_PATH
# fi
# else
# echo "Found $THIS_PYTHON_PATH in ~/.bashrc - path not changed."
# fi
#
# # set PYTHONPATH for immediate use (call this script with ". ./name.sh" to retain)
# if [ "$(echo $PYTHONPATH | grep $THIS_PYTHON_PATH)" == "" ]; then
# if [ "$(echo $PYTHONPATH)" == "" ]; then
# # there's apparently no PYTHONPATH already, so no need to append
# export PYTHONPATH=$THIS_PYTHON_PATH
# echo "Set PYTHONPATH to $PYTHONPATH"
# else
# export PYTHONPATH=$PYTHONPATH:$THIS_PYTHON_PATH
# echo "Updated current PYTHONPATH to $PYTHONPATH"
# fi
# else
# echo "PYTHONPATH not updated. PYTHONPATH=$PYTHONPATH"
# fi
#"***************************************************************************************************"
# CheckForError() function
#
# example: CheckForError $? mylog.1.txt mylog2.txt
#
# functions are a common place to get weird script errors. typically carriage returns. use dos2unix
#
# for cmake internal recipe errors, see: https://cmake.org/cmake/help/v3.9/command/execute_process.html
#
# note tee captures error code: https://stackoverflow.com/questions/1221833/pipe-output-and-capture-exit-status-in-bash
#"***************************************************************************************************"
CheckForError() { # $1 expected to be error code via $?
if [ "$1" != "0" ]; then
if [ "$2" != "" ]; then
echo "---------------------------"
echo "Looking in $2 for errors..."
echo "---------------------------"
grep -v " --disable-werror " "$2" | grep -B2 -i error
fi
if [ "$3" != "" ]; then
echo "---------------------------"
echo "Looking in $3 for errors..."
echo "---------------------------"
grep -v " --disable-werror " "$3" | grep -B2 -i error
fi
if [ "$4" != "" ]; then
echo "---------------------------"
echo "Looking in $4 for errors..."
echo "---------------------------"
grep -v " --disable-werror " "$4" | grep -B2 -i error
fi
if [ "$5" != "" ]; then
echo "---------------------------"
echo "Looking in $5 for errors..."
echo "---------------------------"
grep -v " --disable-werror " "$5" | grep -B2 -i error
fi
read -p "Error detected. Try updating dependencies. Press enter to continue, or Ctrl-C to abort."
else
echo "Ok! Exit code = [$1] using params=$params"
fi
}
#"***************************************************************************************************"
# CheckForGitFileChange() bash function. Compare hash of local file to one on GitHub
#
# example: check specific file:
# CheckForGitFileChange ~/workspace/nextpnr/README.md
#
# example: check this bash file:
# CheckForGitFileChange $0
#
# see https://gist.github.com/gojimmypi/22b7d43ce69e9c828e97534ff0a1d27f
#
#"***************************************************************************************************"
CheckForGitFileChange() {
SAVED_CURRENT_PATH=$(pwd)
if [ ! -f "$1" ]; then
echo "File not found: "$1
return 1
fi
## in case we get called from some other directory, we need to know the entire path of this file
## as git commands need to be run in the repository directory.
GIT_REL_PATH=$(dirname $1 | tr --delete '\t\r\n')
GIT_FULL_PATH="$(cd "${GIT_REL_PATH}"; pwd)"
GIT_FILE_NAME=$(basename $1 | tr --delete '\t\r\n' )
echo "Checking"$GIT_FULL_PATH"/"$GIT_FILE_NAME
cd $GIT_FULL_PATH
# compares occur to local files only, so quietly fetch
git fetch > /dev/null
# we first need to get the latest commit hash
# COMMIT_HASH=$(git show --format=%H --no-patch --no-abbrev-commit HEAD..origin/master | head -1)
COMMIT_HASH=$(git show --format=%H --no-patch --no-abbrev-commit HEAD..origin/master)
# view the file in the commit hash found and pipe to `git hash-object` to compute hash
GIT_HASH=$(git show $COMMIT_HASH:$1 | git hash-object --stdin )
# simple `git hash-object` to compute hash of the local file
THIS_HASH=$(git hash-object $1)
# some visual entertainment
echo "COMMIT_HASH = $COMMIT_HASH"
echo "GIT_HASH = $GIT_HASH"
echo "THIS_HASH = $THIS_HASH"
if [ "$THIS_HASH" == "$GIT_HASH" ]; then
echo "Confirmed $1 is the most recent version found in GitHub."
else
echo "Warning! This version of $1 does not match the most recent version in GitHub!"
read -p "Press enter to continue, or Ctrl-C to abort. (manually push/pull recent file)"
fi
cd $SAVED_CURRENT_PATH
}
# check that we are not running as root
ls /root > /dev/null 2>&1
EXIT_STAT=$?
if [ $EXIT_STAT -ne 0 ];then
echo "Startup ulx3s toolchain. Security Context:" $(whoami) | tee -a "$THIS_SETUP_LOG"
else
echo "Setup aborted. Do not run as root. Causes undesired install permissions. Enter sudo password as required during setup."
exit 2
fi
CheckForGitFileChange $0
if [ "$1" == "" ]; then
echo ""
echo "$0 --help for additional options."
echo ""
read -p "Press [Enter] to update all system dependencies, fetch latest github code, and rebuild everything..."
fi
if [[ "$params" == *"help"* ]] || [[ "$params" == *"--help"* ]] || [[ "$params" == *"-h"* ]]; then
echo ""
echo "$THIS_FILE_NAME help. Version 0.1"
echo ""
echo "If no parametes are selected, install and update everything."
echo ""
echo "If selection option is already installed, git fetch latest version and install."
echo ""
echo "Logs are saved to "$LOG_DIRECTORY"/"$THIS_FILE_NAME"_[step]_"$LOG_SUFFIX".log"
echo "Edit WORKSPACE setting to fit your needs."
echo ""
echo " --arachne-pnr : install/update arachne-pnr"
echo " --blinky : install/update ULX3S-Blinky"
echo " --help : show this help screen"
echo " --icestorm : install/update icestorm"
echo " --make : make and upload the ULX3S-Blinky project"
echo " --nextpnr : install/update nextpnr"
echo " --nosystem : do not install requirements; do not perform apt-get update and apt-get upgrade"
echo " --prjtrellis : install/update prjtrellis"
echo " --system : install requirements; perform apt-get update and apt-get upgrade"
echo " --ujprog : install/update ujprog"
echo " --ulx3s-bin : install/update ulx3s-bin quixk start binaries"
echo " --version : show versions of installed tools"
echo " --yosys : install/update yosys"
echo ""
fi
echo "params="$params
# for anything other than --help we will likely need to be sudo to install, so run once with the date to get started
if [ "$params" != "--help" ]; then
echo "date"
sudo date # pause if copy/paste password prompt (otherwise text ends up in password prompt)
fi
# either explicitly updating with keyword "system" or no parameter at all, will update system
# a "nosystem" parameter will avoid updating the system libraries
if [[ "$1" != *"--nosystem"* ]] && { [[ "$1" == *"--system"* ]] || [ "$1" == "" ]; } then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_system_update_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo "update/upgrade current system. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
sudo apt-get update --assume-yes | tee -a "$THIS_LOG"
sudo apt-get upgrade --assume-yes | tee -a "$THIS_LOG"
echo "***************************************************************************************************"
echo "git install and config. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
# These git .insteadOf options may not be needed if your firewall does not blocks the git ports,
# but we set anyhow.
#
# it is unlikely to cause harm for these repositories, unless for some reason your firewall is blocking HTTPS
sudo apt-get install git --assume-yes | tee -a "$THIS_LOG"
# git config --global url.https://git.qemu.org/git/.insteadOf git://git.qemu-project.org/
# git config --global url.https://anongit.freedesktop.org/git/.insteadOf git://anongit.freedesktop.org/
# git config --global url.https://github.com/riscv.insteadOf git://github.com/riscv
# also consider somerthing like this for everything on GitHub:
# git config --global url.https://github.com/.insteadOf git://github.com/
#
# and to clear:
# git config --global --unset url.https://github.com/.insteadOf
echo "***************************************************************************************************"
echo " install x11 dependencies (only needed for WSL?)"
echo "***************************************************************************************************"
sudo apt install dbus-x11
cd "$WORKSPACE"
echo "***************************************************************************************************"
echo "install icestorm dependencies. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
# this next install needs a bit of disk space:
# 0 upgraded, 205 newly installed, 0 to remove and 3 not upgraded.
# Need to get 130 MB of archives.
# After this operation, 652 MB of additional disk space will be used.
#
sudo apt-get install build-essential clang bison flex libreadline-dev \
gawk tcl-dev libffi-dev git mercurial graphviz \
xdot pkg-config libftdi-dev --assume-yes | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
echo "***************************************************************************************************"
echo "install Python and dependencies. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
sudo apt-get install python python3 | tee -a "$THIS_LOG"
sudo apt-get install python3-pip --assume-yes | tee -a "$THIS_LOG"
pip3 install database
echo "***************************************************************************************************"
echo "install apio. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
pip3 install -U apio | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
echo "***************************************************************************************************"
echo "install nextpnr dependencies. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
# this next line is about another half gig of files!
# 0 upgraded, 249 newly installed, 0 to remove and 3 not upgraded.
# Need to get 132 MB of archives.
# After this operation, 623 MB of additional disk space will be used.
#
sudo apt-get install libboost-all-dev python3-dev qt5-default clang-format libeigen3-dev --assume-yes | tee -a "$THIS_LOG"
sudo apt-get install cmake --assume-yes | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
echo "***************************************************************************************************"
echo "install verilator. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
# The following NEW packages will be installed:
# verilator
# 0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
# Need to get 2878 kB of archives.
# After this operation, 13.1 MB of additional disk space will be used.
sudo apt-get install verilator | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
if grep -q Microsoft /proc/version; then
echo "***************************************************************************************************"
echo "WSL detected; Install x86_64-w64-mingw32-gcc; Saving log to $THIS_LOG"
echo "***************************************************************************************************"
sudo apt-get install mingw-w64 | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
fi
echo "***************************************************************************************************"
echo "update/upgrade current system again. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
sudo apt-get update --assume-yes | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
sudo apt-get upgrade --assume-yes | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
fi
if [[ "$1" == *"--blinky"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_blinky_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo "@DoctorWkt ULX3S-Blinky. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
if [ ! -d "$WORKSPACE"/ULX3S-Blinky ]; then
git clone --recursive https://github.com/DoctorWkt/ULX3S-Blinky | tee -a "$THIS_LOG"
cd ULX3S-Blinky
else
cd ULX3S-Blinky
git fetch | tee -a "$THIS_LOG"
git pull | tee -a "$THIS_LOG"
fi
fi
if [ "$params" != "--help" ]; then
sudo apio drivers --serial-enable
sudo usermod -a -G dialout $USER
fi
if [[ "$1" == *"--icestorm"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_icestorm_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " icestorm. Saving log to: "$THIS_LOG
echo "***************************************************************************************************"
# see http://www.clifford.at/icestorm/
if [ ! -d "$WORKSPACE"/icestorm ]; then
git clone https://github.com/cliffordwolf/icestorm.git icestorm | tee -a "$THIS_LOG"
cd icestorm
else
cd icestorm
git fetch | tee -a "$THIS_LOG"
git pull | tee -a "$THIS_LOG"
make clean | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
fi
make -j$(nproc) | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
sudo make install | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
else
# for non-help params, alwayss check versions even if not updating them
cd "$WORKSPACE"
cd icestorm
if [ "$params" != "--help" ]; then
CheckForGitFileChange README.md
fi
fi
if [[ "$1" == *"--arachne-pnr"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_arachne-pnr_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " arachne-pnr. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
if [ ! -d "$WORKSPACE"/arachne-pnr ]; then
git clone https://github.com/cseed/arachne-pnr.git arachne-pnr | tee -a "$THIS_LOG"
cd arachne-pnr
else
cd arachne-pnr
git fetch | tee -a "$THIS_LOG"
git pull | tee -a "$THIS_LOG"
make clean | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
fi
make -j$(nproc) | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
sudo make install | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
else
# for non-help params, alwayss check versions even if not updating them
cd "$WORKSPACE"
cd arachne-pnr
if [ "$params" != "--help" ]; then
CheckForGitFileChange README.md
fi
fi
if [[ "$1" == *"--prjtrellis"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_prjtrellis_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " prjtrellis (required for nextpnr-ecp5). Saving log to $THIS_LOG"
echo "***************************************************************************************************"
if [ ! -d "$WORKSPACE"/prjtrellis ]; then
git clone --recursive https://github.com/SymbiFlow/prjtrellis
cd prjtrellis
else
cd prjtrellis
git fetch | tee -a "$THIS_LOG"
git pull | tee -a "$THIS_LOG"
fi
# cmake must run from the libtrellis directory
cd libtrellis
# Makefile will not exist the very first time, so nothing to do
if [ ! -f "Makefile" ]; then
echo "$0: File 'Makefile' not found. Not cleaning..."
else
make clean | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
fi
cmake -DCMAKE_INSTALL_PREFIX=/usr . | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
# see https://stackoverflow.com/questions/9383014/cant-import-my-own-modules-in-python
# now set above
# export PYTHONPATH="~/workspace/prjtrellis/database"
make | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
sudo make install | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
else
# for non-help params, alwayss check versions even if not updating them
cd "$WORKSPACE"
cd prjtrellis
if [ "$params" != "--help" ]; then
CheckForGitFileChange README.md
fi
fi
if [[ "$1" == *"--nextpnr"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_nextpnr_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " nextpnr-ecp5. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
# see https://github.com/YosysHQ/nextpnr#nextpnr-ecp5
if [ ! -d "$WORKSPACE"/nextpnr ]; then
git clone https://github.com/YosysHQ/nextpnr.git | tee -a "$THIS_LOG"
cd nextpnr
else
cd nextpnr
git fetch | tee -a "$THIS_LOG"
git pull | tee -a "$THIS_LOG"
make clean | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG" "./CMakeFiles/CMakeOutput.log" "./CMakeFiles/CMakeError.log"
# CheckForError $? "$THIS_LOG"
fi
# Note the "DTRELLIS_INSTALL_PREFIX=/usr" value is the install directory, not git workspace clone directory
# If CMake fails, try rm CMakeCache.txt
cmake -DARCH=ecp5 -DTRELLIS_INSTALL_PREFIX=/usr . | tee -a "$THIS_LOG"
echo This error: $?
CheckForError $? "./CMakeFiles/CMakeOutput.log" "./CMakeFiles/CMakeError.log"
# this is currently failing with
# [ 17%] Generating ecp5/chipdbs/chipdb-25k.bba
# Traceback (most recent call last):
# File "/home/gojimmypi/workspace/nextpnr/ecp5/trellis_import.py", line 3, in <module>
# import database
# ModuleNotFoundError: No module named 'database'
# see https://stackoverflow.com/questions/9383014/cant-import-my-own-modules-in-python
# to fix:
# export PYTHONPATH="~/workspace/prjtrellis/database"
make -j$(nproc) | tee -a "$THIS_LOG"
# CheckForError $?
CheckForError $? "./CMakeFiles/CMakeOutput.log" "./CMakeFiles/CMakeError.log"
sudo make install | tee -a "$THIS_LOG"
CheckForError $?
else
# for non-help params, alwayss check versions even if not updating them
cd "$WORKSPACE"
cd nextpnr
if [ "$params" != "--help" ]; then
CheckForGitFileChange README.md
fi
fi
if [[ "$1" == *"--yosys"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_yosys_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " yosys. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
# see http://www.clifford.at/yosys/
if [ ! -d "$WORKSPACE"/yosys ]; then
git clone https://github.com/cliffordwolf/yosys.git yosys | tee -a "$THIS_LOG"
cd yosys
else
cd yosys
git fetch | tee -a "$THIS_LOG"
git pull | tee -a "$THIS_LOG"
make clean | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
fi
make -j$(nproc) | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
sudo make install | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
else
# for non-help params, alwayss check versions even if not updating them
cd "$WORKSPACE"
cd yosys
if [ "$params" != "--help" ]; then
CheckForGitFileChange README.md
fi
fi
if [[ "$1" == *"--ujprog"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_ujprog_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " ujprog. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
# see https://github.com/f32c/tools/tree/master/ujprog
# NOTE: Although this successfully compiles, it does not seem to work in WSL (not USB device support)
if [ ! -d "$WORKSPACE"/f32c_tools ]; then
git clone https://github.com/f32c/tools.git f32c_tools | tee -a "$THIS_LOG"
cd f32c_tools/ujprog
else
cd f32c_tools
git fetch | tee -a "$THIS_LOG"
git pull | tee -a "$THIS_LOG"
cd f32c_tools/ujprog
make clean | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
fi
# There's no point to making the linux version of ujprog in WSL, as native USB devices are not supported.
# but we can compile the Windows version, amd actually call it from WSL (call from /mnt/c... not ~/...)
if grep -q Microsoft /proc/version; then
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_ming32_64_"$LOG_SUFFIX".log"
cd "$WORKSPACE"
echo "***************************************************************************************************"
echo " ming32_64. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
make -f Makefile.ming32_64 | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
sudo make -f Makefile.ming32_64 install | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
else
make -f Makefile.linux | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
sudo make -f Makefile.linux install | tee -a "$THIS_LOG"
CheckForError $? "$THIS_LOG"
# The default install directory for ujprog is /usr/local/bin/ujprog however the rxrbln Makefile
# expects it to be /usr/src/f32c-ujprog/ujprog/ujprog so we'll just create a quick symlink
sudo mkdir -p /usr/src/f32c-ujprog/ujprog/
sudo ln -s /usr/local/bin/ujprog /usr/src/f32c-ujprog/ujprog/ujprog
fi
else
# for non-help params, alwayss check versions even if not updating them
cd "$WORKSPACE"
cd f32c_tools/ujprog
if [ "$params" != "--help" ]; then
CheckForGitFileChange README.md
fi
fi
if [[ "$1" == *"--version"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_version_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " show versions installed. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
lsb_release -a | tee -a "$THIS_LOG"
python --version | tee -a "$THIS_LOG"
python3 --version | tee -a "$THIS_LOG"
cmake --version | tee -a "$THIS_LOG"
clang --version | tee -a "$THIS_LOG"
echo qtf_default $(apt-cache show qt5-default | grep -m1 Version) | tee -a "$THIS_LOG"
echo libboost-all-dev $(apt-cache show libboost-all-dev | grep -m1 Version) | tee -a "$THIS_LOG"
for pk in build-essential clang bison flex libreadline-dev \
gawk tcl-dev libffi-dev git mercurial graphviz \
xdot pkg-config python python3 libftdi-dev \
qt5-default python3-dev libboost-dev; \
do echo "$pk" $(apt-cache show "$pk" | grep -m1 Version | tee -a "$THIS_LOG"); done
nextpnr-ecp5 --version | tee -a "$THIS_LOG"
yosys -V | tee -a "$THIS_LOG"
fi
if [[ "$1" == *"--ulx3s-bin"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_ulx3s-bin_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " ulx3s-bin. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
if [ ! -d "$WORKSPACE"/ulx3s-bin ]; then
git clone --recursive https://github.com/ulx3s/ulx3s-bin.git | tee -a "$THIS_LOG"
cd ulx3s-bin
else
cd ulx3s-bin
git fetch | tee -a "$THIS_LOG"
git pull | tee -a "$THIS_LOG"
fi
fi
if [[ "$1" == *"--make"* ]] || [ "$1" == "" ]; then
cd "$WORKSPACE"
THIS_LOG=$LOG_DIRECTORY"/"$THIS_FILE_NAME"_make_"$LOG_SUFFIX".log"
echo "***************************************************************************************************"
echo " build the ULX3S-Blinky. Saving log to $THIS_LOG"
echo "***************************************************************************************************"
# See https://github.com/DoctorWkt/ULX3S-Blinky
cd ULX3S-Blinky
# Get our WSL-specific Makefile
# wget (todo)/raw/Makefile -O Makefile
make clean
# the make prog looks for ~wkt/.bin/ujprog, which we don't have.
# so we'll make the bit file and upload explicitly.
# see also ~/$WORKSPACE/ulx3s-bin/ quick start files for ujprog
make ulx3s.bit
read -p "Press [Enter] to upload blinky to ulx3s"
echo ""
$WORKSPACE/f32c_tools/ujprog/ujprog ulx3s.bit
date
fi
echo ""
echo "Done!"
if [ "$params" != "--help" ]; then
echo "See log files in:" $LOG_DIRECTORY
ls $LOG_DIRECTORY | grep -x $THIS_FILE_NAME".*"$LOG_SUFFIX".log"
fi
cd $STARTING_PATH
exit
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment