doesn't work Wi-Fi on KFTT

dmesg_kftt

<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.0.8-02825-g9e39b8c (ubuntu@ip-10-166-55-151) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 SMP PREEMPT Sat Aug 3 23:03:37 PDT 2013
<4>[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: OMAP4 Bowser4 board
<4>[    0.000000] ATAGS:gyro_cal_size=36. 
<4>[    0.000000]         0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
<4>[    0.000000]   000: 00 00 00 24 00 05 FB CA FF FD C1 78 FF FE 80 FB
<4>[    0.000000]   001: FF FF BD 8F FF FF FC 80 FF FF FE 60 00 00 09 E0
<4>[    0.000000]   002: A4 83 1E E0
<4>[    0.000000] 
<3>[    0.000000] omap_bowser_fixup
<4>[    0.000000] Lab126 Idme driver version 1.1
<4>[    0.000000] Bowser board id - 8030800000000000
<4>[    0.000000] 
<4>[    0.000000] board type = 803
<4>[    0.000000] 
<4>[    0.000000] board revision = 8
<4>[    0.000000] 
<4>[    0.000000] board variant = 0
<4>[    0.000000] boot count = 26
<6>[    0.000000] omap_ion_init: ion_heap[0] name=secure_input, size=10MB, addr=0xbf300000
<6>[    0.000000] omap_ion_init: ion_heap[1] name=tiler, size=70MB, addr=0xb4400000
<6>[    0.000000] omap_ion_init: ion_heap[2] name=nonsecure_tiler, size=32MB, addr=0xa6c00000
<6>[    0.000000] Reserving 33554432 bytes SDRAM for VRAM
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<6>[    0.000000] OMAP4460 ES1.1
<6>[    0.000000] SRAM: Mapped pa 0x4030d000 to va 0xfe40d000 size: 0x1000
<6>[    0.000000] SMC: Allocated workspace of 0x300000 Bytes at (0xbfd00000)
<7>[    0.000000] On node 0 totalpages: 197120
<7>[    0.000000] free_area_init_node: node 0, pgdat c07c54e0, node_mem_map c1033000
<7>[    0.000000]   Normal zone: 1280 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 156928 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 768 pages used for memmap
<7>[    0.000000]   HighMem zone: 38144 pages, LIFO batch:7
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @c1840000 s6976 r8192 d13504 u32768
<7>[    0.000000] pcpu-alloc: s6976 r8192 d13504 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 195072
<5>[    0.000000] Kernel command line: console=ttyO2,115200n8 rootdelay=2 mem=1G init=/init vmalloc=256M vram=32M omapfb.vram=0:20M androidboot.console=ttyO2 androidboot.hardware=bowser
<6>[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Memory: 618MB 152MB = 770MB total
<5>[    0.000000] Memory: 769416k/769416k available, 279160k reserved, 155648K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
<5>[    0.000000]     vmalloc : 0xe8800000 - 0xf8000000   ( 248 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xe8000000   ( 640 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .init : 0xc0008000 - 0xc0048000   ( 256 kB)
<5>[    0.000000]       .text : 0xc0048000 - 0xc0770000   (7328 kB)
<5>[    0.000000]       .data : 0xc0770000 - 0xc07c6040   ( 345 kB)
<5>[    0.000000]        .bss : 0xc07c6064 - 0xc09884b8   (1802 kB)
<6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:396
<4>[    0.000000] omap_hwmod: dpll_mpu_m2_ck: missing clockdomain for dpll_mpu_m2_ck.
<6>[    0.000000] OMAP clockevent source: GPTIMER1 at 32768 Hz
<6>[    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
<6>[    0.000000] Calibrating delay loop... 1392.74 BogoMIPS (lpj=5439488)
<6>[    0.007873] pid_max: default: 32768 minimum: 301
<6>[    0.070648] Mount-cache hash table entries: 512
<6>[    0.070648] Initializing cgroup subsys debug
<6>[    0.070648] Initializing cgroup subsys cpuacct
<6>[    0.071502] Initializing cgroup subsys freezer
<6>[    0.071502] CPU: Testing write buffer coherency: ok
<6>[    0.072052] L310 cache controller enabled
<6>[    0.072052] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x5e470000, Cache size: 1048576 B
<4>[    0.150543] CPU1: Booted secondary processor
<6>[    0.165771] Brought up 2 CPUs
<6>[    0.220550] SMP: Total of 2 processors activated (2792.83 BogoMIPS).
<4>[    0.223968] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for emif_fw
<4>[    0.223968] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_instr
<4>[    0.223968] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_1
<4>[    0.223999] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l3_main_2
<4>[    0.223999] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_abe
<4>[    0.224029] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_cfg
<4>[    0.224029] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
<4>[    0.224060] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
<4>[    0.224060] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for mpu_private
<4>[    0.224121] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for sl2if
<4>[    0.224121] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for thermal_sensor
<4>[    0.224182] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ohci
<4>[    0.224182] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for usbhs_ehci
<4>[    0.224182] omap_hwmod: l3_div_ck: missing clockdomain for l3_div_ck.
<4>[    0.224182] omap_hwmod: l4_div_ck: missing clockdomain for l4_div_ck.
<3>[    0.228332] _omap4_module_wait_ready: Timeout waiting for module enable (mcpdm_fck: clkctrl = 0x30002)
<4>[    0.232513] omap_hwmod: mcpdm: cannot be enabled (3)
<6>[    0.234130] print_constraints: dummy: 
<6>[    0.234130] NET: Registered protocol family 16
<6>[    0.234710] GPMC revision 6.0
<6>[    0.235961] EMIF0 is enabled with IRQ142
<6>[    0.235961] EMIF1 is enabled with IRQ143
<6>[    0.236053] Last OMAP reset reason was Cold Reset (PRM_RSTST=0x1)
<6>[    0.236511] OMAP GPIO hardware version 0.1
<6>[    0.238220] omap_mux_init: Add partition: #1: core, flags: 2
<6>[    0.239318] omap_mux_init: Add partition: #2: wkup, flags: 2
<6>[    0.239318] ** 1cs ddr detected **
<4>[    0.240142] MAX44007: Pulling up IRQ line
<4>[    0.240386] uart auto suspend - enabled
<3>[    0.240386] omap_mux_get_by_name: Could not find signal uart1_cts.uart1_cts
<3>[    0.240539] omap_hwmod_mux_init: Could not allocate device mux entry
<4>[    0.241424] bowser_wifi_mux_init: Configured GPIO_44 as wifi host wake interrupt, IRQ num = 204
<4>[    0.368957] Configured GPIO_82 as bluetooth host wake interrupt, IRQ num = 242
<4>[    0.368957] EHCI usb host deliberately not installed
<4>[    0.369232] LCD_EN_GPIO success
<6>[    0.374664] OMAP DMA hardware revision 0.0
<4>[    0.374877] omap_rproc_get_pool: carveout memory is unavailable: 0x0, 0x0
<6>[    0.382049] bio: create slab <bio-0> at 0
<4>[    0.382324] i2c-core: driver [twl] using legacy suspend method
<4>[    0.382690] i2c-core: driver [twl] using legacy resume method
<5>[    0.382690] SCSI subsystem initialized
<6>[    0.383697] usbcore: registered new interface driver usbfs
<6>[    0.383697] usbcore: registered new interface driver hub
<6>[    0.384246] usbcore: registered new device driver usb
<6>[    0.385925] omap_i2c omap_i2c.1: bus 1 rev4.0 at 400 kHz
<4>[    0.385925] Skipping twl internal clock init and using bootloader value (unknown osc rate)
<6>[    0.389007] twl6030: PIH (irq 39) chaining IRQs 368..387
<6>[    0.390472] TWL603x Boot Information:
<6>[    0.390655] Start condition is power on (PHOENIX_START_CONDITION = 0x01)
<6>[    0.390930] Last turn off status is long key press (PHOENIX_LAST_TURN_OFF_STATUS = 0x03)
<6>[    0.391143] Hardware Conditions (PHOENIX_STS_HW_CONDITIONS) is 0x33
<6>[    0.391845] print_constraints: LDOUSB: at 3300 mV normal standby
<6>[    0.694702] twl6030_usb twl6030_usb: Initialized TWL6030 USB module
<6>[    0.695404] print_constraints: VANA: 2100 mV normal standby
<6>[    0.696075] print_constraints: CLK32KG: 
<6>[    0.696563] print_constraints: LDO5: 1200 <--> 3000 mV at 1800 mV normal standby
<6>[    0.697052] print_constraints: LDO1: 1800 <--> 2500 mV at 1900 mV normal standby
<6>[    0.697509] print_constraints: LDO7: 1200 <--> 2900 mV at 1800 mV normal standby
<6>[    0.698120] print_constraints: LDO6: 1800 mV normal standby
<6>[    0.698150] print_constraints: LDOLN: 1800 mV normal standby
<6>[    0.699096] print_constraints: LDO2: 1000 <--> 3000 mV at 2800 mV normal standby
<6>[    0.699554] print_constraints: LDO4: 1200 <--> 2800 mV at 1800 mV normal standby
<6>[    0.700073] print_constraints: LDO3: 2800 mV normal standby
<6>[    0.700256] omap_i2c omap_i2c.2: bus 2 rev4.0 at 400 kHz
<6>[    0.701660] omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
<6>[    0.703155] omap_i2c omap_i2c.4: bus 4 rev4.0 at 400 kHz
<6>[    0.704895] omap-rproc omap-rproc.0: dsp is available
<6>[    0.704895] omap-rproc omap-rproc.1: ipu is available
<6>[    0.704895] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    0.704895] Bluetooth: Core ver 2.16
<6>[    0.705749] NET: Registered protocol family 31
<6>[    0.705749] Bluetooth: HCI device and connection manager initialized
<6>[    0.705780] Bluetooth: HCI socket layer initialized
<6>[    0.705780] Bluetooth: L2CAP socket layer initialized
<6>[    0.705780] Bluetooth: SCO socket layer initialized
<6>[    0.706176] cfg80211: Calling CRDA to update world regulatory domain
<6>[    0.706512] Switching to clocksource 32k_counter
<6>[    0.706542] musb-hdrc: version 6.0, musb-dma, peripheral
<7>[    0.707977] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>[    0.707977] musb-hdrc: MHDRC RTL version 2.0 
<7>[    0.708038] musb-hdrc: setup fifo_mode 4
<7>[    0.708038] musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>[    0.708038] musb-hdrc musb-hdrc: USB OTG mode controller at fc0ab000 using DMA, IRQ 124
<6>[    0.708038] cpufreq_perfactive_init possible_cpus: 2
<6>[    0.708435] NET: Registered protocol family 2
<6>[    0.708435] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.708984] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[    0.708984] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes)
<6>[    0.712677] Switched to NOHz mode on CPU #0
<6>[    0.712707] Switched to NOHz mode on CPU #1
<6>[    0.714385] TCP: Hash tables configured (established 131072 bind 65536)
<6>[    0.714385] TCP reno registered
<6>[    0.714385] UDP hash table entries: 512 (order: 3, 32768 bytes)
<6>[    0.714385] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes)
<6>[    0.714385] NET: Registered protocol family 1
<6>[    0.715942] Trying to unpack rootfs image as initramfs...
<6>[    0.715942] Freeing initrd memory: 200K
<4>[    1.417449] omap_init_opp_table: no hwmod or odev for hsi, [22] cannot add OPPs.
<4>[    1.417480] omap_init_opp_table: no hwmod or odev for hsi, [23] cannot add OPPs.
<4>[    1.559082] bcm2076_bt_rfkill_set_power(On)
<4>[    1.559173] bcm2076_bt_rfkill_set_power(Off)
<6>[    1.559234] ram_console: got buffer at a6a00000, size 200000
<6>[    1.559234] ram_console: no valid data in buffer (sig = 0x2143debc)
<6>[    1.559234] console [ram-1] enabled
<6>[    1.560119] omap-iommu omap-iommu.0: ducati registered
<6>[    1.560119] omap-iommu omap-iommu.1: tesla registered
<4>[    1.569030] highmem bounce pool size: 64 pages
<6>[    1.569335] ashmem: initialized
<6>[    1.574615] fuse init (API version 7.16)
<6>[    1.574615] msgmni has been set to 1199
<6>[    1.576995] Registering char device tf_driver (122:0)
<6>[    1.576995] SMCAG01.06.0 D   
<6>[    1.578826] io scheduler noop registered
<6>[    1.578826] io scheduler deadline registered
<6>[    1.578918] io scheduler cfq registered (default)
<6>[    1.578918] start plist test
<6>[    1.584197] end plist test
<6>[    2.277618] OMAP DSS rev 4.0
<7>[    2.278869] HDCP: hdcp_init() 3489363201
<7>[    2.279571] HDCP: **** hdcp_load_keys ****
<6>[    2.279907] ******** board type = Tate PVT ********
<6>[    2.279937] EVT3.0 or above identified
<4>[    2.280059] nt51012_probe done
<6>[    2.280059] dsscomp: initializing.
<7>[    2.280548] misc dsscomp: display0=nt51012
<7>[    2.280548] misc dsscomp: display1=hdmi_panel
<6>[    2.280578] misc dsscomp: found 2 displays and 4 overlays
<3>[    2.280944] could not allocate slot
<6>[    2.281219] omap-rproc omap-rproc.1: powering up ipu
<6>[    2.281372] virtio_rpmsg_bus virtio0: rpmsg backend virtproc probed successfully
<6>[    2.281555] virtio_rpmsg_bus virtio1: rpmsg backend virtproc probed successfully
<6>[    2.282135] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 104) is a OMAP UART0
<6>[    2.283081] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 105) is a OMAP UART1
<6>[    2.283386] omap_uart.2: ttyO2 at MMIO 0x48020000 (irq = 106) is a OMAP UART2
<6>[    2.283386] console [ttyO2] enabled
<6>[    3.507202] omap_uart.3: ttyO3 at MMIO 0x4806e000 (irq = 102) is a OMAP UART3
<6>[    3.515472] omap_ion_probe: adding heap secure_input of type 2 with bf300000@a00000
<6>[    3.523681] omap_ion_probe: adding heap tiler of type 4 with b4400000@4600000
<6>[    3.531311] omap_ion_probe: adding heap nonsecure_tiler of type 4 with a6c00000@2000000
<6>[    3.531372] PVR: PVRCore_Init
<6>[    3.543334] PVR: PVRSRVDriverProbe(pDevice=e64ade00)
<6>[    3.543334] PVR: SGX register base: 0x56000000
<6>[    3.553619] PVR: SGX register size: 65535
<6>[    3.553619] PVR: SGX IRQ: 53
<6>[    3.560974] PVR: EnableSystemClocks: Enabling System Clocks
<6>[    3.561035] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency (EBUSY) [171, drivers/gpu/pvr/omap4/sysutils_linux.c]
<6>[    3.579437] PVR_K:(Warning): EnableSGXClocks: Unable to scale SGX frequency (EBUSY) [171, drivers/gpu/pvr/omap4/sysutils_linux.c]
<6>[    3.592224] PVR: PVRCore_Init: major device 251
<6>[    3.603698] brd: module loaded
<6>[    3.606964] loop: module loaded
<6>[    3.606964] i2c i2c-4: mpu_probe: 0
<6>[    3.606964] <6>mldl_cfg:Reset MPU6050 B1
<6>[    3.878723] i2c i2c-4: Installing irq using 164
<6>[    3.878723] i2c i2c-4: Module Param interface = mpuirq
<6>[    3.889190] i2c i2c-4: inv_mpu_register_slave: +mpu6050 Type 1: Addr: 68 IRQ: 164, Adapt:  4
<6>[    3.898651] i2c i2c-4: Installing accelirq irq using 164
<4>[    3.904479] i2c-core: driver [mpu6050B1] using legacy suspend method
<4>[    3.911254] i2c-core: driver [mpu6050B1] using legacy resume method
<6>[    3.911285] mpu_init: Probe name mpu6050B1
<6>[    3.923461] PPP generic driver version 2.4.2
<6>[    3.928741] PPP Deflate Compression module registered
<6>[    3.928741] PPP BSD Compression module registered
<6>[    3.934326] tun: Universal TUN/TAP device driver, 1.6
<6>[    3.946533] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[    3.946533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    3.960235] Initializing USB Mass Storage driver...
<6>[    3.960235] usbcore: registered new interface driver usb-storage
<6>[    3.972076] USB Mass Storage support registered.
<6>[    4.279083] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    4.286407] android_usb gadget: Number of LUNs=1
<6>[    4.286407]  lun0: LUN: removable file: (no medium)
<6>[    4.296539] android_usb gadget: android_usb ready
<6>[    4.302062] input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>[    4.309997] max44007_probe
<6>[    4.309997] input: MAX44007 as /devices/virtual/input/input1
<4>[    4.322418] i2c-core: driver [MAX44007] using legacy suspend method
<4>[    4.322418] i2c-core: driver [MAX44007] using legacy resume method
<6>[    4.335815] twl6030_pwrbutton_probe: Enter
<6>[    4.340698] input: twl6030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl6030_pwrbutton/input/input2
<6>[    4.352874] BU52061 sensors driver: init
<6>[    4.357360] bu52061_dev register ok.
<6>[    4.357360] input: bu52061 as /devices/virtual/input/input3
<4>[    4.367492] BU52061_init_irq
<6>[    4.370574] BU52061 Probe OK
<6>[    4.377014] using rtc device, twl_rtc, for alarms
<6>[    4.377014] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<6>[    4.389099] i2c /dev entries driver
<6>[    4.389099] Linux video capture interface: v2.00
<6>[    4.389099] dmm: probe base: fd300000, irq 145
<6>[    4.403289] bq27541: Entering probe...
<6>[    4.501983] bq27541: probe succeeded
<4>[    4.505859] i2c-core: driver [bq27541] using legacy suspend method
<4>[    4.505859] i2c-core: driver [bq27541] using legacy resume method
<6>[    4.519012] Summit SMB347 Driver
<6>[    4.523468] smb347 3-005f: SMB347 detected, addr=0x5f chip_id=0xbf
<4>[    4.535217] i2c-core: driver [smb347] using legacy suspend method
<4>[    4.541778] i2c-core: driver [smb347] using legacy resume method
<6>[    4.541778] SMB347 Driver added
<6>[    4.551727] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
<6>[    4.558868] device-mapper: uevent: version 1.0.3
<6>[    4.564117] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[    4.573181] Bluetooth: HCI UART driver ver 2.2
<6>[    4.577941] Bluetooth: HCI H4 protocol initialized
<6>[    4.583068] Bluetooth: HCI H5 protocol initialized
<6>[    4.588317] cpuidle: using governor ladder
<6>[    4.592712] cpuidle: using governor menu
<6>[    4.599029] usbcore: registered new interface driver usbhid
<6>[    4.604980] usbhid: USB HID core driver
<6>[    4.609436] logger: created 256K log 'log_main'
<6>[    4.614440] logger: created 256K log 'log_events'
<6>[    4.619537] logger: created 256K log 'log_radio'
<6>[    4.624816] logger: created 256K log 'log_system'
<6>[    4.629943] logger: created 128K log 'log_metrics'
<6>[    4.635162] logger: created 64K log 'log_amazon_main'
<3>[    4.643127] thermal_sensor_set_temp: no cooling agents for domain cpu
<3>[    4.650085] omap_report_temp:thermal_sensor_set_temp reports error
<6>[    4.658172] omap_temp_sensor omap_temp_sensor.0: omap_ondie_sensor : 'omap_temp_sensor'
<3>[    4.658172] thermal_sensor_set_temp: no cooling agents for domain cpu
<6>[    4.678527] tmp103_temp_sensor 3-0070: initialized
<6>[    4.688690] case_temp_sensor case_temp_sensor.0: case_sensor : 'case_temp_sensor'
<7>[    4.698638] wm8962_i2c_probe calling!!!!!
<3>[    4.708099] aess aess: Failed to add route AMIC_UL MM_EXT->AMIC_UL
<6>[    4.716735] wm8962 3-001a: customer id 0 revision D
<6>[    4.728057] input: WM8962 Beep Generator as /devices/platform/omap/omap_i2c.3/i2c-3/3-001a/input/input4
<6>[    4.738311] mmc0: new high speed DDR MMC card at address 0001
<6>[    4.745300] mmcblk0: mmc0:0001 MAG2GA 14.5 GiB 
<6>[    4.750518] mmcblk0boot0: mmc0:0001 MAG2GA partition 1 2.00 MiB
<6>[    4.757324] mmcblk0boot1: mmc0:0001 MAG2GA partition 2 2.00 MiB
<4>[    4.767761] Alternate GPT is invalid, using primary GPT.
<6>[    4.773681]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
<6>[    4.781982] asoc: null-codec-dai <-> MultiMedia1 LP mapping ok
<6>[    4.791381]  mmcblk0boot1: unknown partition table
<6>[    4.798492] asoc: null-codec-dai <-> MultiMedia1 mapping ok
<6>[    4.804473]  mmcblk0boot0: unknown partition table
<6>[    4.812072] asoc: wm8962 <-> omap-mcbsp-dai.1 mapping ok
<6>[    4.819366] asoc: null-codec-dai <-> MultiMedia2 mapping ok
<6>[    4.827392] asoc: Bluetooth <-> omap-mcbsp-dai.2 mapping ok
<6>[    4.835479] asoc: Bluetooth <-> omap-mcbsp-dai.2 mapping ok
<6>[    4.842498] asoc: wm8962 <-> omap-mcbsp-dai.1 mapping ok
<6>[    4.849212] asoc: wm8962 <-> omap-mcbsp-dai.1 mapping ok
<6>[    4.856536] input: bowser h2w as /devices/platform/soc-audio/sound/card0/input5
<6>[    4.866058] asoc: hdmi-audio-codec <-> hdmi-audio-dai mapping ok
<6>[    4.872985] ALSA device list:
<6>[    4.876129]   #0: TI OMAP4 bowser Board
<6>[    4.880249]   #1: OMAP4HDMI
<6>[    4.883361] GACT probability NOT on
<6>[    4.887115] Mirror/redirect action on
<6>[    4.891021] u32 classifier
<6>[    4.893920]     Actions configured
<6>[    4.897552] Netfilter messages via NETLINK v0.30.
<6>[    4.902679] nf_conntrack version 0.5.0 (12025 buckets, 48100 max)
<6>[    4.910247] ctnetlink v0.93: registering with nfnetlink.
<6>[    4.916015] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    4.923461] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    4.930023] xt_time: kernel timezone is -0000
<6>[    4.937011] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.942962] arp_tables: (C) 2002 David S. Miller
<6>[    4.947967] TCP cubic registered
<6>[    4.952209] NET: Registered protocol family 10
<6>[    4.962921] Mobile IPv6
<6>[    4.965606] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.971740] IPv6 over IPv4 tunneling driver
<6>[    4.982574] NET: Registered protocol family 17
<6>[    4.987335] NET: Registered protocol family 15
<6>[    4.992218] Bluetooth: RFCOMM TTY layer initialized
<6>[    4.997467] Bluetooth: RFCOMM socket layer initialized
<6>[    5.002960] Bluetooth: RFCOMM ver 1.11
<6>[    5.007049] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    5.012756] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    5.019226] NET: Registered protocol family 35
<6>[    5.024383] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<6>[    5.032592] ThumbEE CPU extension supported.
<5>[    5.037200] Registering SWP/SWPB emulation handler
<6>[    5.046508] Reprogramming LPDDR2 timings to 400000000 Hz
<4>[    5.052429] sr_init: No PMIC hook to init smartreflex
<6>[    5.058013] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>[    5.066497] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>[    5.074890] smartreflex smartreflex.2: omap_sr_probe: SmartReflex driver initialized
<6>[    5.083526] SmartReflex class 1.5 driver: initialized (86400000ms)
<3>[    5.090118] Power Management for TI OMAP4.
<6>[    5.094604] OMAP4 PM: Static dependency added between MPUSS and DUCATI <-> L4_PER/CFG and L3_1.
<6>[    5.105316] cpufreq_governor_perfactive for_each_cpu: 2
<6>[    5.111755] omap_cpu_thermal_manager:sensor 43200 avg sensor 0 pcb 
<6>[    5.118225] 0, delta 5732 hot spot 48932
<6>[    5.122619] omap_cpu_thermal_manager: hot spot temp 48932 - going into safe zone
<6>[    5.130493] case_thermal_manager: syst temp =< tcold thot set to 60500
<6>[    5.137390] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1127000Calib=1012840 margin=13000
<6>[    5.148498] case_set_temp_thresh:threshold_cold 60500, threshold_hot 60500
<6>[    5.155822] sr_class1p5_calib_work: mpu: Calibration complete: Voltage Nominal=1380000Calib=1202740 margin=0
<6>[    5.171081] clock: disabling unused clocks to save power
<6>[    5.387817] cannot apply mgr(lcd) on inactive device
<4>[    5.393157] omapfb omapfb: failed to apply dispc config
<4>[    5.398742] sr_class1p5_calib_work: iva Stop sampling: Voltage Nominal=950000 samples=150
<6>[    5.407470] cannot apply mgr(tv) on inactive device
<4>[    5.412689] omapfb omapfb: failed to apply dispc config
<6>[    5.418334] sr_class1p5_calib_work: iva: Calibration complete: Voltage Nominal=950000Calib=860920 margin=13000
<6>[    5.428985] cannot apply mgr(lcd2) on inactive device
<4>[    5.434417] omapfb omapfb: failed to apply dispc config
<6>[    5.440765] regulator_init_complete: LDOLN: disabling
<7>[    5.447265] omaplfb OMAPLFBInitFBDev: Device 0: Requesting 5 TILER 2D framebuffers
<6>[    5.456512] twl_rtc twl_rtc: setting system clock to 2014-05-16 15:13:19 UTC (1400253199)
<6>[    5.465637] Freeing init memory: 256K
<4>[    5.472412] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>[    5.610107] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null)
<6>[    5.824218] omap-rproc omap-rproc.1: Loaded BIOS image ducati-m3.bin, size 5552268
<6>[    5.832519] omap-rproc omap-rproc.1: BIOS image version is 2
<6>[    5.856689] omap-iommu omap-iommu.0: iommu_get: ducati qos_request
<4>[    5.878662] omap_hwmod: ipu: failed to hardreset
<6>[    5.883605] omap-iommu omap-iommu.0: ducati: version 2.1
<6>[    5.894134] omap-rproc omap-rproc.1: remote processor ipu is now up
<6>[    5.908905] omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>[    5.920837] omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>[    5.928405] omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>[    5.936340] omap_rpmsg_mbox_callback: received echo reply from ipu !
<6>[    5.943420] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x32
<6>[    5.954254] virtio_rpmsg_bus virtio0: creating channel rpmsg-client-sample addr 0x33
<6>[    5.963439] virtio_rpmsg_bus virtio0: creating channel rpmsg-omx0 addr 0x3c
<6>[    5.977081] rpmsg_omx rpmsg-omx0: new OMX connection srv channel: 1024 -> 60!
<6>[    6.054351] virtio_rpmsg_bus virtio1: creating channel rpmsg-omx1 addr 0x3c
<6>[    6.062194] rpmsg_omx rpmsg-omx1: new OMX connection srv channel: 1024 -> 60!
<6>[    6.166748] EXT4-fs (mmcblk0p13): barriers disabled
<6>[    6.173400] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,commit=20,barrier=0
<6>[    6.188598] EXT4-fs (mmcblk0p12): barriers disabled
<6>[    6.200408] EXT4-fs (mmcblk0p12): recovery complete
<6>[    6.206298] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,commit=20,barrier=0
<6>[    6.221130] EXT4-fs (mmcblk0p8): barriers disabled
<6>[    6.287475] EXT4-fs (mmcblk0p8): recovery complete
<6>[    6.293395] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,commit=20,barrier=0
<7>[    6.353088] HDCP: **** hdcp_load_keys_cb ****
<6>[    6.357727] HDCP: loaded keys
<3>[    6.368499] init: cannot find '/system/bin/uim-sysfs', disabling 'uim'
<3>[    6.380523] init: cannot find '/system/bin/gllbs', disabling 'gpsd'
<4>[    6.434020] ===========ATMEL TOUCH SENSOR DETECT================
<4>[    6.458801] Atmel touch sensor vendor gpadc value: 94
<4>[    6.464324] Atmel touch sensor is TPK.
<5>[    6.468750] CPU1: shutdown
<4>[    6.474456] loading atmel touch driver
<6>[    6.507873] atmel_mxt_ts 2-004c: atmel touch driver version: 1.19
<6>[    6.540435] SMC: SecureCRC=0xBC7458DC
<4>[    6.547363] Disabling non-boot CPUs ...
<6>[    6.667144] PVR: Installing MISR with cookie c084cc98
<6>[    6.688873] PVR: Installing device LISR SGX ISR on IRQ 53 with cookie e5d96000
<6>[    6.696716] sr_class1p5_calib_work: core: Calibration complete: Voltage Nominal=1250000Calib=1025500 margin=13000
<6>[    6.713195] PVR: OSUnMapPhysToLin: unmapping 65535 bytes from e8d20000
<6>[    6.731506] SMC PA: INFO 00000001 00:00:00.000 ------ ------  --------------- Booting... (t=15:13:20.771) SMCXG01.06p7.39637     /PlayReady Integration
<6>[    6.746002] PVR: SysFinalise: Version string: SGX revision = 1.2.0
<6>[    6.765777] EXT4-fs (mmcblk0p13): re-mounted. Opts: discard
<6>[    6.812103] warning: `bluetoothd' uses 32-bit capabilities (legacy support in use)
<6>[    6.821014] SMC PA: INFO 00000002 00:00:00.090 ------ ------  --------------- Booted
<6>[    6.845397] EXT4-fs (mmcblk0p12): re-mounted. Opts: discard
<6>[    6.899139] EXT4-fs (mmcblk0p8): re-mounted. Opts: discard
<4>[    6.957061] bcmdhd: disagrees about version of symbol sdio_release_host
<4>[    6.965850] bcmdhd: Unknown symbol sdio_release_host (err -22)
<4>[    6.972106] bcmdhd: disagrees about version of symbol sdio_disable_func
<4>[    6.979248] bcmdhd: Unknown symbol sdio_disable_func (err -22)
<4>[    6.985656] bcmdhd: disagrees about version of symbol sdio_set_block_size
<4>[    6.993103] bcmdhd: Unknown symbol sdio_set_block_size (err -22)
<4>[    7.002380] bcmdhd: disagrees about version of symbol sdio_claim_host
<4>[    7.013427] bcmdhd: Unknown symbol sdio_claim_host (err -22)
<4>[    7.022094] bcmdhd: disagrees about version of symbol sdio_memcpy_fromio
<7>[    7.030242] HDCP: hdcp_ioctl() - ENABLE 3489367951
<4>[    7.035644] bcmdhd: Unknown symbol sdio_memcpy_fromio (err -22)
<7>[    7.042144] HDCP: hdcp_work_queue() - START - 3489367959 hdmi=0 hdcp=1 auth=0 evt= 1 0 hdcp_ctrl=00
<7>[    7.061614] HDCP: hdcp_ioctl() - WAIT 3489367982 0
<7>[    7.103515] HDCP: hdcp_work_queue() - END - 3489368021 hdmi=0 hdcp=1 auth=0 evt=1 0 
<4>[    7.113769] bcmdhd: disagrees about version of symbol sdio_register_driver
<4>[    7.147735] bcmdhd: Unknown symbol sdio_register_driver (err -22)
<4>[    7.154388] CPU1: Booted secondary processor
<4>[    7.157867] bcmdhd: disagrees about version of symbol sdio_readw
<4>[    7.157897] bcmdhd: Unknown symbol sdio_readw (err -22)
<4>[    7.157958] bcmdhd: disagrees about version of symbol sdio_reset_comm
<4>[    7.157958] bcmdhd: Unknown symbol sdio_reset_comm (err -22)
<4>[    7.158050] bcmdhd: disagrees about version of symbol sdio_writew
<4>[    7.158050] bcmdhd: Unknown symbol sdio_writew (err -22)
<4>[    7.158081] bcmdhd: disagrees about version of symbol sdio_memcpy_toio
<4>[    7.158081] bcmdhd: Unknown symbol sdio_memcpy_toio (err -22)
<4>[    7.158142] bcmdhd: disagrees about version of symbol sdio_f0_readb
<4>[    7.158142] bcmdhd: Unknown symbol sdio_f0_readb (err -22)
<4>[    7.158203] bcmdhd: disagrees about version of symbol sdio_release_irq
<4>[    7.158233] bcmdhd: Unknown symbol sdio_release_irq (err -22)
<4>[    7.158294] bcmdhd: disagrees about version of symbol sdio_f0_writeb
<4>[    7.158294] bcmdhd: Unknown symbol sdio_f0_writeb (err -22)
<4>[    7.158294] bcmdhd: disagrees about version of symbol sdio_unregister_driver
<4>[    7.158294] bcmdhd: Unknown symbol sdio_unregister_driver (err -22)
<4>[    7.158325] bcmdhd: disagrees about version of symbol sdio_readsb
<4>[    7.158325] bcmdhd: Unknown symbol sdio_readsb (err -22)
<4>[    7.158447] bcmdhd: disagrees about version of symbol sdio_readl
<4>[    7.158447] bcmdhd: Unknown symbol sdio_readl (err -22)
<4>[    7.158477] bcmdhd: disagrees about version of symbol mmc_set_data_timeout
<4>[    7.158477] bcmdhd: Unknown symbol mmc_set_data_timeout (err -22)
<4>[    7.158569] bcmdhd: disagrees about version of symbol sdio_writel
<4>[    7.158569] bcmdhd: Unknown symbol sdio_writel (err -22)
<4>[    7.158599] bcmdhd: disagrees about version of symbol mmc_wait_for_req
<4>[    7.158599] bcmdhd: Unknown symbol mmc_wait_for_req (err -22)
<4>[    7.158721] bcmdhd: disagrees about version of symbol sdio_claim_irq
<4>[    7.158721] bcmdhd: Unknown symbol sdio_claim_irq (err -22)
<4>[    7.158721] bcmdhd: disagrees about version of symbol sdio_enable_func
<4>[    7.158721] bcmdhd: Unknown symbol sdio_enable_func (err -22)
<4>[    7.158813] bcmdhd: disagrees about version of symbol sdio_readb
<4>[    7.158813] bcmdhd: Unknown symbol sdio_readb (err -22)
<4>[    7.158813] bcmdhd: disagrees about version of symbol sdio_writeb
<4>[    7.158813] bcmdhd: Unknown symbol sdio_writeb (err -22)
<6>[    7.159698] Switched to NOHz mode on CPU #1
<6>[    7.378967] atmel_mxt_ts 2-004c: Family ID: 161 Variant ID: 2 Version: 2.0.AA Object Num: 23
<3>[    7.393493] atmel_mxt_ts 2-004c: configured max finger (32) is too large.
<6>[    7.417541] atmel_mxt_ts 2-004c: T53, start:148 size:5 instances:1 min_reportid:0 max_reportid:0
<6>[    7.440979] atmel_mxt_ts 2-004c: T37, start:153 size:130 instances:1 min_reportid:0 max_reportid:0
<6>[    7.456573] atmel_mxt_ts 2-004c: T44, start:283 size:1 instances:1 min_reportid:0 max_reportid:0
<6>[    7.477661] atmel_mxt_ts 2-004c: T5, start:284 size:9 instances:1 min_reportid:0 max_reportid:0
<6>[    7.486938] atmel_mxt_ts 2-004c: T6, start:293 size:6 instances:1 min_reportid:1 max_reportid:1
<6>[    7.496154] atmel_mxt_ts 2-004c: T38, start:299 size:64 instances:1 min_reportid:0 max_reportid:0
<6>[    7.505584] atmel_mxt_ts 2-004c: T7, start:363 size:3 instances:1 min_reportid:0 max_reportid:0
<6>[    7.516387] atmel_mxt_ts 2-004c: T8, start:366 size:10 instances:1 min_reportid:0 max_reportid:0
<6>[    7.525726] atmel_mxt_ts 2-004c: T9, start:376 size:35 instances:2 min_reportid:2 max_reportid:33
<6>[    7.535156] atmel_mxt_ts 2-004c: T15, start:446 size:11 instances:2 min_reportid:34 max_reportid:35
<6>[    7.546295] atmel_mxt_ts 2-004c: T18, start:468 size:2 instances:1 min_reportid:0 max_reportid:0
<6>[    7.557312] atmel_mxt_ts 2-004c: T19, start:470 size:16 instances:1 min_reportid:36 max_reportid:36
<6>[    7.568511] atmel_mxt_ts 2-004c: T25, start:486 size:26 instances:1 min_reportid:37 max_reportid:37
<6>[    7.579742] atmel_mxt_ts 2-004c: T40, start:512 size:5 instances:2 min_reportid:0 max_reportid:0
<6>[    7.590728] atmel_mxt_ts 2-004c: T42, start:522 size:10 instances:2 min_reportid:38 max_reportid:39
<6>[    7.601928] atmel_mxt_ts 2-004c: T43, start:542 size:7 instances:1 min_reportid:0 max_reportid:0
<6>[    7.612792] atmel_mxt_ts 2-004c: T46, start:549 size:10 instances:1 min_reportid:40 max_reportid:40
<6>[    7.623962] atmel_mxt_ts 2-004c: T47, start:559 size:10 instances:2 min_reportid:0 max_reportid:0
<6>[    7.634918] atmel_mxt_ts 2-004c: T48, start:579 size:74 instances:1 min_reportid:41 max_reportid:41
<6>[    7.646087] atmel_mxt_ts 2-004c: T52, start:653 size:15 instances:2 min_reportid:42 max_reportid:43
<6>[    7.657287] atmel_mxt_ts 2-004c: T55, start:683 size:6 instances:2 min_reportid:0 max_reportid:0
<6>[    7.667755] atmel_mxt_ts 2-004c: T56, start:695 size:34 instances:1 min_reportid:44 max_reportid:44
<6>[    7.678161] atmel_mxt_ts 2-004c: T57, start:729 size:3 instances:2 min_reportid:45 max_reportid:46
<6>[    7.813140] atmel_mxt_ts 2-004c: status = 90
<6>[    7.813140] atmel_mxt_ts 2-004c: status = 0
<6>[    7.813140] atmel_mxt_ts 2-004c: Config CRC 0x56184F: OK
<6>[    7.813171] atmel_mxt_ts 2-004c: Resetting chip
<4>[    8.209625] misc dsscomp: [e5935c00] ignoring set failure -22
<6>[    8.209686] mgr_blank while GO is set
<6>[    8.224029] atmel_mxt_ts 2-004c: Matrix Size X24Y32 Touchscreen size X799Y1279
<6>[    8.224243] atmel_mxt_ts 2-004c: Noise threshold is 30
<6>[    8.224578] atmel_mxt_ts 2-004c: Noise level report enabled
<6>[    8.231567] atmel_mxt_ts 2-004c: status = 0
<6>[    8.232269] input: AtmelTouch as /devices/platform/omap/omap_i2c.2/i2c-2/2-004c/input/input6
<6>[    8.232482] atmel_mxt_ts 2-004c: mxt_start begin
<6>[    8.233276] atmel_mxt_ts 2-004c: mxt_start end
<6>[    8.289093] atmel_mxt_ts 2-004c: status = 10
<6>[    8.307067] atmel_mxt_ts 2-004c: status = 0
<4>[    9.243865] atmel chown of sysfs entry
<4>[    9.455505] Setting up thermal policy
<4>[    9.460540] Setting up thermal threshold for backlight_cooling device
<4>[    9.468658] Setting up thermal threshold for charger_cooling device
<6>[    9.753479] Trying to read Samsung eMMC stats
<4>[    9.758209] Running Smart report on Smsung device
<3>[    9.769104] wm8962 3-001a: bootup time wm8962_mic_detect_boot_work is called!!!!!!!!!!!!!!!!!!
<3>[   10.026885] wm8962 3-001a: Detected removal
<2>[   10.031951] wm8962 3-001a: Iphone report 0
<6>[   10.073760] Samsung data [20 dwords]:
<6>[   10.077545]  D2D2D2D2
<6>[   10.080047]  00800000
<6>[   10.082489]  00008000
<6>[   10.084930]  00010000
<6>[   10.087341]  00000002
<6>[   10.089813]  00000003
<6>[   10.092803]  00000000
<6>[   10.095275]  00000030
<6>[   10.097778]  00000002
<6>[   10.100219]  00000000
<6>[   10.102996]  00000031
<6>[   10.105346]  00000000
<6>[   10.107757]  00000000
<6>[   10.110260]  00000000
<6>[   10.112792]  00000000
<6>[   10.115234]  00000000
<6>[   10.117675]  00000000
<6>[   10.120208]  000018ED
<6>[   10.122680]  00000000
<6>[   10.125213]  00000238
<6>[   10.127868]  00000000
<6>[   10.130218]  00002000
<6>[   10.132659]  70EEAEDF
<6>[   10.135162]  F9957AC9
<6>[   10.137634]  5EE7E975
<6>[   10.140106]  A83A72EA
<6>[   10.142578]  B0047E3C
<6>[   10.145080]  3C33DFB4
<6>[   10.147521]  53BDDE38
<6>[   10.149963]  79DDE27E
<6>[   10.152770]  000018ED
<6>[   10.155120]  00000000
<6>[   10.157592]  0000150C
<6>[   10.160125]  00000183
<6>[   10.162567]  00000001
<6>[   10.165039]  00000125
<6>[   11.144775] atmel_mxt_ts 2-004c: status = 10
<6>[   11.155364] atmel_mxt_ts 2-004c: status = 0
<6>[   17.350311] request_suspend_state: wakeup (3->0) at 17346862796 (2014-05-16 15:13:31.390563966 UTC)
<4>[   17.445281] bcm2076_bt_rfkill_set_power(On)
<3>[   17.559265] init: no such service 'dhcpcd_:-h kindle-994250c92 '
<6>[   17.579223] binder: 93:93 BC_REQUEST_DEATH_NOTIFICATION death notification already set
<6>[   17.622436] acc_open
<6>[   17.624847] acc_release
<6>[   18.486663] atmel_mxt_ts 2-004c: atmel plug in value 0
<6>[   18.520507] atmel_mxt_ts 2-004c: atmel plug in value 0
<4>[   21.841522] hci0 e593a800
<3>[   24.231689] init: cannot find '/system/bin/auto_shutdown', disabling 'check_shutdown'
<3>[   25.730804] wm8962 3-001a: mutex locked wm8962_irq
<3>[   25.736236] wm8962 3-001a: FLL locked now disable FLL lock irq
<3>[   25.742919] wm8962 3-001a: mutex unlocked wm8962_irq
<6>[   25.782958] atmel_mxt_ts 2-004c: got action code 1
<3>[   29.026794] android_usb: already disabled
<3>[   29.036071] android_usb: already disabled
<3>[   29.041381] android_usb: already disabled
<6>[   29.045959] mtp_bind_config
<3>[   29.665374] init: sys_prop: permission denied uid:1000  name:persist.lab126.sys.usb.mtp
<6>[   30.450408] binder: release 579:626 transaction 16115 in, still active
<6>[   30.458160] binder: send failed reply for transaction 16115 to 920:936
<6>[   35.816040] atmel_mxt_ts 2-004c: set antitouch 20 1 0 0
<6>[   36.350585] SMC PA: INFO 00000003 00:00:29.617 P-0001 T-000D System --------- Mounting partition 0...
<6>[   36.364624] SMC PA: INFO 00000004 00:00:29.633 P-0001 T-000D System --------- File system mounted successfully in partition 0
<6>[   36.388153] SMC PA: INFO 00000005 00:00:29.656 P-0001 T-000D System --------- Mounting partition 1...
<6>[   36.401000] SMC PA: INFO 00000006 00:00:29.668 P-0001 T-000D System --------- File system mounted successfully in partition 1
<3>[   48.831237] init: untracked pid 1351 exited
<4>[   55.222045] smb347 3-005f: Spurious APSD IRQ!
<6>[   55.765045] smb347 3-005f: Detected charger: SDP
<6>[   55.789459] smb347 3-005f: Switching to USB5 mode
<6>[   55.797424] atmel_mxt_ts 2-004c: atmel plug in value 1
<6>[   55.816680] atmel_mxt_ts 2-004c: atmel set charger bit 1, regval 210
<6>[   55.824157] atmel_mxt_ts 2-004c: status = 10
<6>[   55.828887] atmel_mxt_ts 2-004c: set antitouch 2 30 8 176
<6>[   55.838989] atmel_mxt_ts 2-004c: status = 0
<6>[   55.844055] atmel_mxt_ts 2-004c: status = 10
<6>[   55.911132] atmel_mxt_ts 2-004c: status = 0
<6>[   56.660766] android_work: sent uevent USB_STATE=CONNECTED
<6>[   56.666595] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   56.743286] android_work: sent uevent USB_STATE=CONNECTED
<6>[   56.750335] android_usb gadget: high speed config #1: android
<6>[   56.756805] android_work: sent uevent USB_STATE=CONFIGURED
<6>[   57.213623] mtp_open
<6>[   65.847229] atmel_mxt_ts 2-004c: set antitouch 20 1 0 0
<4>[   87.176055] omap_i2c omap_i2c.3: timeout waiting for bus ready
<3>[   87.182342] omap_i2c omap_i2c.3: last_msg[0]: addr=0x0070, len=1, flags=0x1
<3>[   87.189819] omap_i2c omap_i2c.3: last_msg[1]: addr=0x0070, len=1, flags=0x0
<3>[   87.197326] omap_i2c omap_i2c.3: last_msg[2]: addr=0x0070, len=1, flags=0x1
<3>[   87.204833] omap_i2c omap_i2c.3: last_msg[3]: addr=0x0055, len=1, flags=0x0
<4>[   87.212371] bq27541 3-0055: i2c read retry
<3>[   89.167541] omap_i2c omap_i2c.3: controller timed out
<3>[   89.172973] omap_i2c omap_i2c.3: last_msg[1]: addr=0x0070, len=1, flags=0x0
<3>[   89.180450] omap_i2c omap_i2c.3: last_msg[2]: addr=0x0070, len=1, flags=0x1
<3>[   89.187896] omap_i2c omap_i2c.3: last_msg[3]: addr=0x0055, len=1, flags=0x0
<3>[   89.195861] omap_i2c omap_i2c.3: last_msg[0]: addr=0x0070, len=1, flags=0x0
<6>[   96.231933] mtp_release
<3>[   96.232116] android_usb: already disabled
<3>[   96.232757] android_usb: already disabled
<6>[   96.232940] adb_bind_config
<6>[   96.233520] adb_bind_config
<6>[   96.234191] mtp_bind_config
<6>[   96.234222] adb_bind_config
<6>[   96.254394] adb_open
<6>[   96.531311] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   96.596954] android_work: sent uevent USB_STATE=CONNECTED
<6>[   96.604827] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[   96.679779] android_work: sent uevent USB_STATE=CONNECTED
<6>[   96.687072] android_usb gadget: high speed config #1: android
<6>[   96.695129] android_work: sent uevent USB_STATE=CONFIGURED
<6>[   96.727874] mtp_open