zha_moes_smart_knob_lights.yaml

blueprint:
  name: ZHA - Moes Smart Knob for lights
  description: 'Control lights with a Moes Smart Knob.
    You can set functions for a single press. This allows you to assign, e.g., a scene
    or anything else.
    Rotating left/right will change the brightness smoothly of the selected light.
    Not all functionality of the device is available at time of writing, e.g. double
    press, long press and press and rotate.

    Original blueprint by seamus65 (https://gist.github.com/seamus65/939a147634942dd885c8704334627f93).

    Improved by GonzaloAlbito (https://gist.github.com/gonzaloalbito/3dc06702e941e08298ea9bfade731731).

    Version 2022-11-15.'
  domain: automation
  input:
    remote:
      name: Remote
      description: Moes Knob to use
      selector:
        device:
          integration: zha
          manufacturer: _TZ3000_qja6nq5z
          model: TS004F
          multiple: false
    light:
      name: Light(s)
      description: The light(s) to control
      selector:
        target:
          entity:
            domain: light
    step_percent:
      name: Light step
      description: Light pecent change for each knob step
      selector:
        number:
          mode: slider
          min: 0
          max: 100
          unit_of_measurement: "%"
      default: 20
    press_light:
      name: Pressed light(s)
      description: The light(s) to control when pressed
      selector:
        target:
          entity:
            domain: light
    press_step_percent:
      name: Pressed light step
      description: Light pecent change for each knob step when pressed
      selector:
        number:
          mode: slider
          min: 0
          max: 100
          unit_of_measurement: "%"
      default: 5
    single_press:
      name: Single press
      description: Action to run on single press
      default: []
      selector:
        action: {}
  source_url: https://gist.github.com/gonzaloalbito/3dc06702e941e08298ea9bfade731731
mode: restart
max_exceeded: silent
trigger:
- platform: event
  event_type: zha_event
  event_data:
    device_id: !input remote
action:
- variables:
    command: '{{ trigger.event.data.command }}'
    cluster_id: '{{ trigger.event.data.cluster_id }}'
    endpoint_id: '{{ trigger.event.data.endpoint_id }}'
    mode: '{% if command != ''toggle'' %} {{ trigger.event.data.args[0] }} {% endif %}'
    steps: '{% if command != ''toggle'' %} {{ (trigger.event.data.args[1] / 12.5 ) | int }} {% endif %}'
    step_percent: !input step_percent
    press_step_percent: !input press_step_percent
- choose:
  - conditions:
    - '{{ cluster_id == 6 }}'
    - '{{ endpoint_id == 1 }}'
    - '{{ command == ''toggle'' }}'
    sequence: !input single_press
  - conditions:
    - '{{ cluster_id == 8 }}'
    - '{{ endpoint_id == 1 }}'
    - '{{ command == ''step'' }}'
    - '{{ mode == ''StepMode.Up'' }}'
    sequence:
    - repeat:
        while:
        - condition: template
          value_template: '{{ repeat.index < 2 }}'
        sequence:
        - service_template: light.turn_on
          target: !input light
          data_template:
            brightness_step_pct: '{{ step_percent * steps }}'
            transition: 0.5
  - conditions:
    - '{{ cluster_id == 8 }}'
    - '{{ endpoint_id == 1 }}'
    - '{{ command == ''step'' }}'
    - '{{ mode == ''StepMode.Down'' }}'
    sequence:
    - repeat:
        while:
        - condition: template
          value_template: '{{ repeat.index < 2 }}'
        sequence:
        - service_template: light.turn_on
          target: !input light
          data_template:
            brightness_step_pct: '-{{ step_percent * steps }}'
            transition: 0.5
  - conditions:
    - '{{ cluster_id == 768 }}'
    - '{{ endpoint_id == 1 }}'
    - '{{ command == ''step_color_temp'' }}'
    - '{{ mode == ''StepMode.Up'' }}'
    sequence:
    - repeat:
        while:
        - condition: template
          value_template: '{{ repeat.index < 2 }}'
        sequence:
        - service_template: light.turn_on
          target: !input press_light
          data_template:
            brightness_step_pct: '{{ press_step_percent * steps }}'
            transition: 0.5
  - conditions:
    - '{{ cluster_id == 768 }}'
    - '{{ endpoint_id == 1 }}'
    - '{{ command == ''step_color_temp'' }}'
    - '{{ mode == ''StepMode.Down'' }}'
    sequence:
    - repeat:
        while:
        - condition: template
          value_template: '{{ repeat.index < 2 }}'
        sequence:
        - service_template: light.turn_on
          target: !input press_light
          data_template:
            brightness_step_pct: '-{{ press_step_percent * steps }}'
            transition: 0.5

Yeah, my goal was to alter this blueprint so it does not happen. I tried altering value on lines 39 and 56 to non zero value, but it had no effect. Any idea what else should I change to achieve it?