Armada 38x boot

sdhci_fdt0-slot0: Got data interrupt 0x00000002, but there is no active command.
sdhci_fdt0-slot0: ============== REGISTER DUMP ==============
sdhci_fdt0-slot0: Sys addr: 0x00000000 | Version:  0x00000202
sdhci_fdt0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000000
sdhci_fdt0-slot0: Argument: 0x00012a00 | Trn mode: 0x00000036
sdhci_fdt0-slot0: Present:  0x01f70000 | Host ctl: 0x00000007
sdhci_fdt0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
sdhci_fdt0-slot0: Wake-up:  0x00000000 | Clock:    0x00000207
sdhci_fdt0-slot0: Timeout:  0x0000000d | Int stat: 0x00000000
sdhci_fdt0-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb
sdhci_fdt0-slot0: AC12 err: 0x00000000 | Host ctl2: 0x00000000
sdhci_fdt0-slot0: Caps:     0x25fcc8b2 | Caps2:    0x00002f77
sdhci_fdt0-slot0: Max curr: 0x00000000 | ADMA err: 0x00000000
sdhci_fdt0-slot0: ADMA addr: 0x00000000 | Slot int: 0x00000000
sdhci_fdt0-slot0: ===========================================
Sending DHCP Request packet from interface mvxpe2 (aa:bb:cc:dd:ee:ff)
Received DHCP Ack packet on mvxpe2 from 0.0.0.0 (accepted)
mvxpe2 at 192.168.0.89 server 0.0.0.0
subnet mask 255.255.255.0 router 192.168.0.10 rootfs 192.168.0.10:/data/clearfog/nfsroot
Adjusted interface mvxpe2
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from nfs: []...
NFS ROOT: 192.168.0.10:/data/clearfog/nfsroot
start_init: trying /sbin/init
Interface mvxpe2 IP-Address 192.168.0.89 Broadcast 192.168.0.255
No suitable dump device was found.
Starting file system checks:
random: unblocking device.
mount_nfs: can't update /var/db/mounttab for 192.168.0.10:/data/clearfog/nfsroot
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
Setting hostuuid: 9c900331-27fa-11b2-8942-140f4dc00500.
Setting hostid: 0xfff56ebe.
Mounting local filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Soft Float compatibility ldconfig path:
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
Starting Network: lo0 mvxpe0 mvxpe1 mvxpe2.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0xb
        inet 127.0.0.1 netmask 0xff000000
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
mvxpe0: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=93<RXCSUM,TXCSUM,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 14:0f:4d:c0:05:00
        media: Ethernet 1000baseT <full-duplex>
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
mvxpe1: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=93<RXCSUM,TXCSUM,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 54:ad:45:03:e9:01
        media: Ethernet 1000baseT <full-duplex>
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
mvxpe2: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=80093<RXCSUM,TXCSUM,VLAN_HWTAGGING,VLAN_HWCSUM,LINKSTATE>
        ether aa:bb:cc:dd:ee:ff
        inet6 fe80::a8bb:ccff:fedd:eeff%mvxpe2 prefixlen 64 tentative scopeid 0xa
        inet 192.168.0.89 netmask 0xffffff00 broadcast 192.168.0.255
        media: Ethernet autoselect (1000baseT <full-duplex,master>)
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
Starting Network: mvxpe0.
mvxpe0: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=93<RXCSUM,TXCSUM,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 14:0f:4d:c0:05:00
        media: Ethernet 1000baseT <full-duplex>
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting Network: mvxpe1.
mvxpe1: flags=8a02<BROADCAST,ALLMULTI,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=93<RXCSUM,TXCSUM,VLAN_HWTAGGING,VLAN_HWCSUM>
        ether 54:ad:45:03:e9:01
        media: Ethernet 1000baseT <full-duplex>
        status: active
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
devd: cannot open pid file: Operation not supported
add host 127.0.0.1: gateway lo0 fib 0: route already in table
add host ::1: gateway lo0 fib 0: route already in table
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
Mounting NFS filesystems:.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Soft Float compatibility ldconfig path:
Creating and/or trimming log files.
Starting syslogd.
syslogd: cannot open pid file: Operation not supported
Clearing /tmp (X related).
Updating motd:.
Mounting late filesystems:.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Jan 13 22:15:49  sm-mta[779]: NOQUEUE: SYSERR(root): cannot flock(/var/run/sendmail.pid, fd=5, type=6, omode=40001, euid=0): Operation not supported
Jan 13 22:15:49  sm-msp-queue[782]: A0DMFnVD000781: SYSERR(root): cannot flock(/var/spool/clientmqueue/sm-client.pid, fd=4, type=6, omode=40001, euid=25): Operation not supported
Starting cron.
cron: can't open or create /var/run/cron.pid: Operation not supported
/etc/rc: WARNING: failed to start cron
Starting background file system checks in 60 seconds.
Tue Jan 13 22:15:50 UTC 1970
FreeBSD/arm (Amnesiac) (ttyu0)
login: root
Jan 13 22:15:53  login: ROOT LOGIN (root) ON ttyu0
FreeBSD 12.0-CURRENT (ARMADA38X) #34 r315651M: Wed Mar 29 14:31:00 BRT 2017
Welcome to FreeBSD!
Release Notes, Errata: https://www.FreeBSD.org/releases/
Security Advisories:   https://www.FreeBSD.org/security/
FreeBSD Handbook:      https://www.FreeBSD.org/handbook/
FreeBSD FAQ:           https://www.FreeBSD.org/faq/
Questions List: https://lists.FreeBSD.org/mailman/listinfo/freebsd-questions/
FreeBSD Forums:        https://forums.FreeBSD.org/
Documents installed with the system are in the /usr/local/share/doc/freebsd/
directory, or can be installed later with:  pkg install en-freebsd-doc
For other languages, replace "en" with a language code like de or fr.
Show the version of FreeBSD installed:  freebsd-version ; uname -a
Please include that output and any error messages when posting questions.
Introduction to manual pages:  man man
FreeBSD directory layout:      man hier
Edit /etc/motd to change this login announcement.
root@:~ # uname -a
FreeBSD  12.0-CURRENT FreeBSD 12.0-CURRENT #34 r315651M: Wed Mar 29 14:31:00 BRT 2017     root@devel:/data/clearfog/obj/arm.armv6/data/clearfog/head/sys/ARMADA38X  arm
root@:~ # etherswitchcfg
port0:
       flags=0<>
       media: Ethernet autoselect (none)
       status: no carrier
port1:
       flags=0<>
       media: Ethernet autoselect (none)
       status: no carrier
port2:
       flags=0<>
       media: Ethernet autoselect (1000baseT <full-duplex>)
       status: active
port3:
       flags=0<>
       media: Ethernet autoselect (none)
       status: no carrier
port4:
       flags=0<>
       media: Ethernet autoselect (none)
       status: no carrier
port5:
       flags=1<CPUPORT>
       media: Ethernet 1000baseT <full-duplex>
       status: active
port6:
       flags=0<>
       media: Ethernet 1000baseT <full-duplex>
       status: active
vlangroup0:
       vlan: 0
       members 0,1,2,3,4,5,6
vlangroup1:
       vlan: 0
       members none
vlangroup2:
       vlan: 0
       members none
vlangroup3:
       vlan: 0
       members none
vlangroup4:
       vlan: 0
       members none
vlangroup5:
       vlan: 0
       members none
vlangroup6:
       vlan: 0
       members none
vlangroup7:
       vlan: 0
       members none
root@:~ #