gotno

NVGcolor getModuleBodyColor(NSVGimage* svgHandle) {
  // educated guess as to what a reasonable minimum area should be,
  // based on testing a bunch of different modules
  float largestArea{11000.f};

  // default in case we can't find anything reasonable
  NVGcolor bodyColor = nvgRGBA(255, 255, 255, 255);

  for (NSVGshape* shape = svgHandle->shapes; shape; shape = shape->next) {
    // skip invisible shapes

gotno

G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops

G1 Y5.0 F{speed_travel} ;move the platform down 15mm
G92 E0 ;zero the extruded length
G1 X40 E30 F200 ; Extrude 30mm of filament in a 4cm line

gotno

G21 ;metric values
G90 ;absolute positioning
M82 ;set extruder to absolute mode
M107 ;start with the fan off
G28 X0 Y0 ;move X/Y to min endstops
G28 Z0 ;move Z to min endstops
G1 Z15.0 F{speed_travel} ;move the platform down 15mm
G92 E0 ;zero the extruded length

; remove the following line

gotno

require "roda"

class Rodaaaaaapp < Roda
  route do |r| # `r` is just Rack::Request + a few additional methods for routing (see below)
    r.root do
      "hey."
    end
  end
end

gotno

remove-zendesk: test mail related stuff
remove-skylight: probably nothing to test here?
squished-comment-signin: is comment signin still squished?
event-sweeper-fix: create event, add/remove sponsor, cache should be swept immediately
implement-fastclick: test demo on mobile
shift-static-route: test demo.thebolditalic.com/shift
sharethrough-article-ad: ensure ad collapses on desktop