gtrstitch · July 13, 2013 23:58
diff --git a/arduino_monitor_sketch b/arduino_monitor_sketch
 #include <SPI.h>
 #include <Ethernet.h> // Initialize the libraries.
 #include <Servo.h> 
 Servo myservo;

 byte mac[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; //I left the MAC address and IP address blank.
 byte ip[] = { 000,000,000,000 };                     // You will want to fill these in with your MAC and IP address.

 EthernetServer server(80); // Assigning the port forwarded number. It's almost always 80.

 String readString; // We will be using strings to keep track of things.
 int val;    // Using val as a variable for the PIR status.
 int pir=3;

 //////////////////////

 void setup(){

  pinMode(2, OUTPUT);
  pinMode(pir, INPUT);
  Ethernet.begin(mac, ip);
  myservo.attach(9);
  myservo.write(45);
 }

 void loop(){
  EthernetClient client = server.available();
  if (client) {
    while (client.connected()) {
      if (client.available()) {                     // This is all where we start up the server and strings.
        char c = client.read();                     
        if (readString.length() < 100) {
          readString += c;
        } 
        if (c == '\n') {
          Serial.println(readString);                      // And here we begin including the HTML
          client.println("HTTP/1.1 200 OK");
          client.println("Content-Type: text/html");
          client.println();
          client.println("<hmtl>");
 client.println("<head>");
 client.println("ARDUINO PAGE");
 client.println("</head>");
 client.println("<title>");
 client.println("ARDUINO + ETHERNET Page");
 client.println("</title>");
 client.println("<body bgcolor=black>");
 client.println("<font color=white>");
 client.println("<meta http-equiv=\"refresh\" content=\"4\">"); // This is used to refresh the page so
 client.println("<center>");                                      // we can see if there is Motion or not.
 client.println("<b>");
 client.println("Greetings! Here you will find a somewhat interactive page served up by my Arduino!");
 client.println("</br>");
 client.println("As well, you can interact with my Arduino! It's pretty basic, and you really can't see it,");
 client.println("</br>");
 client.println("but as you press a button, you turn on or off an LED or move a Servo! Have fun!");
 client.println("</b>");
 client.println("<p>");
 client.println("<table border=0 width=200>");
 client.println("<tr>");
 client.println("<td align=center>");
 client.println("<font color=white>");
 client.println("The Temperature is:");
 client.println("</td>");
 client.println("</tr>");
 client.println("<tr>");
 client.println("<td align=center>");
 client.println("<font color = turquoise size=10>");
 int temp = (((5*analogRead(5)*100/1024)*1.8)+32);     // This replaces the 00 with a temperature in F.
 client.println(temp);
 client.println("* F");
 client.println("</td>");
 client.println("</tr>");
 client.println("</table>");
 client.println("<p>");
 client.println("<FORM>");
 client.println("<INPUT type=button value=LED1-ON onClick=window.location='/?lighton1\'>");
 client.println("<INPUT type=button value=LED1-OFF onClick=window.location='/?lightoff1\'>");
 client.println("</FORM>");   // Above and below you'll see that when we click on a button, it adds a little snippet
 client.println("<FORM>");    // to the end of the URL. The Arduino watches for this and acts accordingly.
 client.println("<INPUT type=button value=Servo-0 onClick=window.location='/?serv0\'>");
 client.println("<INPUT type=button value=Servo-45 onClick=window.location='/?serv45\'>");
 client.println("<INPUT type=button value=Servo-90 onClick=window.location='/?serv90\'>");
 client.println("</FORM>");
 client.print("<table border=1 width=200>");
 client.print("<tr>");
 client.print("<td align=center>");
 client.print("<font color=white size=3>");
 client.print("There is currently");
 client.print("</td>");
 client.print("</tr>");
 client.print("<tr>");
 client.print("<td align=center>");
 client.print("<font color=white size=3>");  // And below we will print Motion if there is, and No Motion if there's not.
 val = digitalRead(pir);
          if (val == HIGH){
           client.print("MOTION");
          }
         else {
          client.print("NO MOTION");
         }
 client.print("</td>");
 client.print("</tr>");
 client.print("</table>");
 client.println("</center>");
 client.println("</font>");
 client.println("</body>");
 client.println("</html>");
 
          delay(1);
  	  
          if(readString.indexOf("?lighton") >0)     // these are the snippets the Arduino is watching for.
          {
            digitalWrite(2, HIGH);
          }
          else{
          if(readString.indexOf("?lightoff") >0)
          {
            digitalWrite(2, LOW);
          }
          
          else{
            if(readString.indexOf("?serv0") >0)
            {
              myservo.write(0);
            }
          
          else{
            if(readString.indexOf("?serv45") >0)
            {
              myservo.write(45);
            }
          
          else{
            if(readString.indexOf("?serv90") >0)
            {
              myservo.write(90);
            }
          }
          }
          }
          }
          readString="";
          client.stop();            // End of session.

        }
      }
    }
  }

 }
	#include <SPI.h>
	#include <Ethernet.h> // Initialize the libraries.
	#include <Servo.h>
	Servo myservo;

	byte mac[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; //I left the MAC address and IP address blank.
	byte ip[] = { 000,000,000,000 }; // You will want to fill these in with your MAC and IP address.

	EthernetServer server(80); // Assigning the port forwarded number. It's almost always 80.

	String readString; // We will be using strings to keep track of things.
	int val; // Using val as a variable for the PIR status.
	int pir=3;

	//////////////////////

	void setup(){

	pinMode(2, OUTPUT);
	pinMode(pir, INPUT);
	Ethernet.begin(mac, ip);
	myservo.attach(9);
	myservo.write(45);
	}

	void loop(){
	EthernetClient client = server.available();
	if (client) {
	while (client.connected()) {
	if (client.available()) { // This is all where we start up the server and strings.
	char c = client.read();
	if (readString.length() < 100) {
	readString += c;
	}
	if (c == '\n') {
	Serial.println(readString); // And here we begin including the HTML
	client.println("HTTP/1.1 200 OK");
	client.println("Content-Type: text/html");
	client.println();
	client.println("<hmtl>");
	client.println("<head>");
	client.println("ARDUINO PAGE");
	client.println("</head>");
	client.println("<title>");
	client.println("ARDUINO + ETHERNET Page");
	client.println("</title>");
	client.println("<body bgcolor=black>");
	client.println("<font color=white>");
	client.println("<meta http-equiv=\"refresh\" content=\"4\">"); // This is used to refresh the page so
	client.println("<center>"); // we can see if there is Motion or not.
	client.println("<b>");
	client.println("Greetings! Here you will find a somewhat interactive page served up by my Arduino!");
	client.println("</br>");
	client.println("As well, you can interact with my Arduino! It's pretty basic, and you really can't see it,");
	client.println("</br>");
	client.println("but as you press a button, you turn on or off an LED or move a Servo! Have fun!");
	client.println("</b>");
	client.println("<p>");
	client.println("<table border=0 width=200>");
	client.println("<tr>");
	client.println("<td align=center>");
	client.println("<font color=white>");
	client.println("The Temperature is:");
	client.println("</td>");
	client.println("</tr>");
	client.println("<tr>");
	client.println("<td align=center>");
	client.println("<font color = turquoise size=10>");
	int temp = (((5analogRead(5)100/1024)*1.8)+32); // This replaces the 00 with a temperature in F.
	client.println(temp);
	client.println("* F");
	client.println("</td>");
	client.println("</tr>");
	client.println("</table>");
	client.println("<p>");
	client.println("<FORM>");
	client.println("<INPUT type=button value=LED1-ON onClick=window.location='/?lighton1\'>");
	client.println("<INPUT type=button value=LED1-OFF onClick=window.location='/?lightoff1\'>");
	client.println("</FORM>"); // Above and below you'll see that when we click on a button, it adds a little snippet
	client.println("<FORM>"); // to the end of the URL. The Arduino watches for this and acts accordingly.
	client.println("<INPUT type=button value=Servo-0 onClick=window.location='/?serv0\'>");
	client.println("<INPUT type=button value=Servo-45 onClick=window.location='/?serv45\'>");
	client.println("<INPUT type=button value=Servo-90 onClick=window.location='/?serv90\'>");
	client.println("</FORM>");
	client.print("<table border=1 width=200>");
	client.print("<tr>");
	client.print("<td align=center>");
	client.print("<font color=white size=3>");
	client.print("There is currently");
	client.print("</td>");
	client.print("</tr>");
	client.print("<tr>");
	client.print("<td align=center>");
	client.print("<font color=white size=3>"); // And below we will print Motion if there is, and No Motion if there's not.
	val = digitalRead(pir);
	if (val == HIGH){
	client.print("MOTION");
	}
	else {
	client.print("NO MOTION");
	}
	client.print("</td>");
	client.print("</tr>");
	client.print("</table>");
	client.println("</center>");
	client.println("</font>");
	client.println("</body>");
	client.println("</html>");

	delay(1);

	if(readString.indexOf("?lighton") >0) // these are the snippets the Arduino is watching for.
	{
	digitalWrite(2, HIGH);
	}
	else{
	if(readString.indexOf("?lightoff") >0)
	{
	digitalWrite(2, LOW);
	}

	else{
	if(readString.indexOf("?serv0") >0)
	{
	myservo.write(0);
	}

	else{
	if(readString.indexOf("?serv45") >0)
	{
	myservo.write(45);
	}

	else{
	if(readString.indexOf("?serv90") >0)
	{
	myservo.write(90);
	}
	}
	}
	}
	}
	readString="";
	client.stop(); // End of session.

	}
	}
	}
	}

	}